doc/developer/lttng-lttv-roadmap.html

   1 <html>
   2 <body>
   3 <center><big><big>LTTV & LTTng roadmap<small><small></center>
   4 <br>
   5 <br>
   6 Here are the roadmaps for the LTTV and LTTng development. I use a priority indice
   7 for the TODO items :<br>
   8 (1) : very high priority<br>
   9 (10): lowest priority<br>
  10 <br>
  11 <br>
  12 Dependencies are written between brackets [ ].<br>
  13 The # symbol marks who is currently working on the item.<br>
  14 The % symbol marks who is interested in the realisation of the item.<br>
  15 The $ symbol marks who is contributing funding for the realisation of the item.<br>
  16 <br>
  17 <br>
  18 <big>LTT Next Generation Roadmap<small><br>
  19 <br>
  20 * TODO (high priority)<br>
  21 <BR>
  22 (1) LTTng event description: move from tracepoint/markers to Ftrace TRACE_EVENT
  23  declarations. Extend TRACE_EVENT as needed.<br>
  24 # <A HREF="mailto: Douglas Santos <douglas.santos@polymtl.ca>">Douglas Santos</A>)<BR>
  25 (1) LTTng ring buffer adaptation for FTrace.<br>
  26 (1) FTrace/LTTng trace format standardization.<BR>
  27 (1) Extend NO_HZ support vs trace streaming support to other architectures (need
  28 to add cpu idle notifiers and test).<br>
  29 (1) Make sure ltt-ascii kernel text dump fits well with streaming hooked into
  30 cpu idle.<br>
  31 [Depends on cpu idle notifier port to other architectures]<br>
  32 (1) Support CPUs with scalable frequency with a time-consistent increment and
  33 with an approach scalable to SMP. (done for ARM OMAP3 UP only, but the OMAP3
  34 approach should be tested and probably derived into an SMP implementation)<br>
  35 <br>
  36 <br>
  37 * Nice to have<br>
  38 <br>
  39 (3) Bring stack dump in sync with new lttng.<br>
  40 (4) Dump mounts. (to fix)<br>
  41 (4) Add Xen support. (Trace buffer desallocation needs to be fixed)<br>
  42 (4) integrate NPTL instrumentation (see
  43 <A HREF="http://nptltracetool.sourceforge.net/">PTT</A>).<br>
  44 (4) Probe calibration kernel module.<br>
  45 (4) Make page faults detect nested fault without nesting 4 times in the page
  46 fault handler. (or use vmalloc_sync_all at each tracing module load)<br>
  47 (5) Add boot time tracing support.<br>
  48 (5) Integrate LTTng and lttd with LKCD.<br>
  49         # <A HREF="mailto:Lai Jiangshan <laijs@cn.fujitsu.com>>">Lai Jiangshan</A><br>
  50 (7) Integrate periodical dump of perfctr hardware counters.<br>
  51 (8) Integrate SystemTAP logging with LTTng.<br>
  52 (8) Integrate periodical dump of SystemTAP computed information.<br>
  53 (9) Add support for setjmp/longjmp and jump tables instrumentation to
  54 ltt-instrument-functions.<br>
  55 <br>
  56 <br>
  57 * Done<br>
  58 <br>
  59 - (2009) Port LTTng to ARM OMAP3 with power management and dynamic frequency scaling
  60   support. (Done by Mathieu Desnoyers, funded by Nokia).<br>
  61 - (2009) Improvement of trace streaming power consumption efficiency (NO_HZ
  62   support) (x86 only for now).<br>
  63 - (2009) Periodic flush for trace streaming (Mathieu Desnoyers).<br>
  64 - (2009) Ascii text output from LTTng. (started by Lai Jiangshan (Fujitsu),
  65   completed by Mathieu Desnoyers)<br>
  66 <br>
  67 <br>
  68 <big>LTTV Roadmap<small><br>
  69 <br>
  70 Note: new feature development is currently done in the Linux Tools Project:
  71 LTTng Integration. Mainwhile, LTTV is maintained as a known-stable viewer.<br>
  72 <br>
  73 <br>
  74 * Nice to have<br>
  75 <br>
  76 (4) Statistics per time window.<br>
  77 (4) Add Xen per physical CPU view.<br>
  78 (4) Add Xen per vcpu view.<br>
  79 (4) Disable plugins when threshold reached (i.e. too much process in control
  80 flow view). Draw, and, when the threshold is reached, stop drawing. The global
  81 statistics view can inhibit showing the per process stats.<br>
  82 (4) Add a visual artifact : PID 0 could be named swapper instead of UNNAMED for
  83 cpus > 0.<br>
  84 (4) Add event specific fields support to filter.<br>
  85 (4) Add a periodic event interval view. (useful to verify event periodicity)<br>
  86 (4) create a graphical per cpu activity view.<br>
  87 (4) Filter by target process.<br>
  88 (4) Compensate for time spent in probes in LTTV analysis.<br>
  89 (4) Add CPU, network, disk, memory usage histogram. [Per interval statistics]<br>
  90 (4) Add sort by process priority in the control flow view (must also instrument
  91 priority information of the processes).<br>
  92 % Airbus<br>
  93 (5) Add Python scripting hooks.<br>
  94 (5) Add GUI interface to take an hybrid trace.<br>
  95 (5) Automatically detect traces with too much processes and disable faulty operations.<br>
  96 (5) Event sequence detector (inspired from regular expressions).<br>
  97 (7) Create a hardware counter viewer (low cost rate counters : L1 cache miss,
  98 page faults, interrupts...). This will be a generalisation of the event rate
  99 view into a view of the evolution of a user definable event field.<br>
 100 <br>
 101 * TO FIX<br>
 102 <br>
 103 (10) Add cancel button to LTTV filter GUI window.<br>
 104 (10) Sometimes, in the control flow view, a process with 0 creation time is
 105 created in addition to the real process itself. Seems to be caused by end of
 106 process life.<br>
 107 (10) Statistics do not take in account the time spent in the mode present at
 108 the beginning of the trace. Example : real time spent in system call on behalf
 109 of process 0.<br>
 110 <br>
 111 <br>
 112 Mathieu Desnoyers<br>
 113
 114
 115 </body>
 116 </html>