lttng-tools.git
7 years agoFix: lttng-consumerd: cpu hotplug: send "streams_sent" command
Mathieu Desnoyers [Thu, 11 May 2017 20:00:56 +0000 (16:00 -0400)] 
Fix: lttng-consumerd: cpu hotplug: send "streams_sent" command

When creating a new channel, the streams being sent to the relayd are
kept invisible to the live client until the "streams_sent" command is
received. This ensures the client does not see a partial stream set.

This "streams_sent" command needs to be sent on CPU hotplug too,
otherwise the live client handling within relayd is not aware of those
streams (they are never published).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: lttng-sessiond: cpu hotplug: send channel to consumer only once
Mathieu Desnoyers [Thu, 11 May 2017 20:00:55 +0000 (16:00 -0400)] 
Fix: lttng-sessiond: cpu hotplug: send channel to consumer only once

On CPU hotplug, we currently send a duplicate of the channel key, which
allocates its own object (duplicated) within the consumerd. We want the
newly added stream to map to the pre-existing channel key, so don't send
the channel duplicate.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: lttng-sessiond: cpu hotplug stream number mismatch
Mathieu Desnoyers [Thu, 11 May 2017 20:00:54 +0000 (16:00 -0400)] 
Fix: lttng-sessiond: cpu hotplug stream number mismatch

The counter should be always increasing (kept in the channel), rather
than local to the function. This causes cpu hotplug handling to
disregard further streams that should be added to the consumer output
on CPU hotplug.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests: use SIGKILL to shutdown daemons in test_thread_exit and test_tp_fail
Jérémie Galarneau [Fri, 19 May 2017 15:19:16 +0000 (11:19 -0400)] 
Tests: use SIGKILL to shutdown daemons in test_thread_exit and test_tp_fail

A current design limitation of the lttng-consumerd will cause it to
hang on shutdown if the timer management thread exits as the teardown
of channels switches off the channel's timers. The timer thread is
then expected to purge timer signals and signal when it is done.

Obviously this state will never be reached as signals are no longer
being processed. This is not dramatic as this is not what this test
is meant to test; we only want to make sure the health check signals that
something went wrong.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: consumer_timer_signal_thread_qs waits on LTTNG_CONSUMER_SIG_SWITCH
Jérémie Galarneau [Thu, 18 May 2017 20:15:20 +0000 (16:15 -0400)] 
Fix: consumer_timer_signal_thread_qs waits on LTTNG_CONSUMER_SIG_SWITCH

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoRevert "Fix: futex can be free'd while used by waker thread"
Jérémie Galarneau [Thu, 18 May 2017 15:40:03 +0000 (11:40 -0400)] 
Revert "Fix: futex can be free'd while used by waker thread"

This reverts commit dce89628fd85a875a8dc511d861057f218f3c1c8.

7 years agoFix: thread exit vs futex wait/wakeup race
Mathieu Desnoyers [Wed, 17 May 2017 22:36:54 +0000 (18:36 -0400)] 
Fix: thread exit vs futex wait/wakeup race

relayd_live_stop performs, in this order:

        CMM_STORE_SHARED(live_dispatch_thread_exit, 1);   [A]
        futex_nto1_wake(&viewer_conn_queue.futex);        [B]

whereas thread_dispatcher does:

   while (!CMM_LOAD_SHARED(live_dispatch_thread_exit)) {  [1]

     [...]
     futex_nto1_prepare(&viewer_conn_queue.futex);        [2]
     [...]
     futex_nto1_wait(&viewer_conn_queue.futex);           [3]

Unfortunately, on the following sequence:

[1] [A] [B] [2] [3]

thread_dispatcher will end up hanging.

We need to move the live_dispatch_thread_exit load between "prepare" and
"wait" to fix this.

There are similar scenarios with relay_thread_dispatcher, and the
session daemon thread_dispatch_ust_registration, which are also fixed
here.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: use lttng_waiter instead of futex in notification thread
Jérémie Galarneau [Wed, 17 May 2017 20:03:13 +0000 (16:03 -0400)] 
Fix: use lttng_waiter instead of futex in notification thread

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd lttng_waiter utils
Jérémie Galarneau [Wed, 17 May 2017 15:16:33 +0000 (11:16 -0400)] 
Add lttng_waiter utils

This utils is adapted from userspace-rcu's urcu-wait.h

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: pthread_join on thread start error
Jérémie Galarneau [Mon, 15 May 2017 19:14:07 +0000 (15:14 -0400)] 
Fix: pthread_join on thread start error

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: missing check on notification thread join
Jérémie Galarneau [Mon, 15 May 2017 15:16:45 +0000 (11:16 -0400)] 
Fix: missing check on notification thread join

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: status_loc argument of waitpid() is used on error
Jérémie Galarneau [Mon, 15 May 2017 14:37:18 +0000 (10:37 -0400)] 
Fix: status_loc argument of waitpid() is used on error

waitpid() may leave stat_loc uninitialized on error (depending
on errno's value, see WAIT(3)).

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: leak of deserialized trigger sent from client
Jérémie Galarneau [Thu, 11 May 2017 20:16:12 +0000 (16:16 -0400)] 
Fix: leak of deserialized trigger sent from client

Deserialized triggers may be leaked on error when
registered or unregistered by the session daemon.

Reported-by: Coverity Scan
CID 1374801 (#1 of 1): Resource leak (RESOURCE_LEAK)

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: missing static qualifier on internal function
Jérémie Galarneau [Thu, 11 May 2017 20:13:25 +0000 (16:13 -0400)] 
Clean-up: missing static qualifier on internal function

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: duplicate values used in lttng_evaluation_status enum
Jérémie Galarneau [Thu, 11 May 2017 14:02:48 +0000 (10:02 -0400)] 
Fix: duplicate values used in lttng_evaluation_status enum

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: missing header inclusions in buffer-usage.h
Jérémie Galarneau [Thu, 11 May 2017 14:02:19 +0000 (10:02 -0400)] 
Fix: missing header inclusions in buffer-usage.h

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: COMPAT_EPOLL_PROC_PATH is available from Linux 2.6.28
Jonathan Rajotte [Tue, 9 May 2017 19:46:35 +0000 (15:46 -0400)] 
Fix: COMPAT_EPOLL_PROC_PATH is available from Linux 2.6.28

v2: Typo in commit message "per see" -> "per se"

Failing on opening [1] is not an error per se. [1] was
introduced in Linux 2.6.28 but epoll is available since
2.5.44. Hence, goto end and set a default value without
setting error return value.

[1] /proc/sys/fs/epoll/max_user_watches

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: skip empty revents in notificationthread
Jérémie Galarneau [Wed, 10 May 2017 20:42:09 +0000 (16:42 -0400)] 
Fix: skip empty revents in notificationthread

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: warning caused by unused label
Jérémie Galarneau [Wed, 10 May 2017 19:49:57 +0000 (15:49 -0400)] 
Clean-up: warning caused by unused label

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: futex can be free'd while used by waker thread
Jérémie Galarneau [Wed, 10 May 2017 19:36:23 +0000 (15:36 -0400)] 
Fix: futex can be free'd while used by waker thread

The futex_nto1 utils assume that the futex it operates on
has a program-long lifetime (or that is is protected by a
third-party).

The notification command system uses a futex allocated on the
waiter's stack. However, the waiter could never enter the
futex() syscall (due to of the opportunist check before the futex
call). In this case, the waiter's stack-allocated futex becomes
invalid, but will be used by the waker to perform the FUTEX_WAKE
operation.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: missing header causes build failure with --disable-epoll
Jérémie Galarneau [Tue, 9 May 2017 12:50:39 +0000 (08:50 -0400)] 
Fix: missing header causes build failure with --disable-epoll

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: return NULL pointer on memory allocation failure
Mathieu Desnoyers [Mon, 8 May 2017 11:48:52 +0000 (07:48 -0400)] 
Fix: return NULL pointer on memory allocation failure

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: unused variable warning in poll compat
Jérémie Galarneau [Tue, 9 May 2017 12:20:17 +0000 (08:20 -0400)] 
Clean-up: unused variable warning in poll compat

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agodoc: how to trace consumerd with valgrind
Mathieu Desnoyers [Mon, 8 May 2017 12:38:37 +0000 (08:38 -0400)] 
doc: how to trace consumerd with valgrind

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoCleanup: initialize kernel ioctl ABI structures to 0
Mathieu Desnoyers [Mon, 8 May 2017 12:34:57 +0000 (08:34 -0400)] 
Cleanup: initialize kernel ioctl ABI structures to 0

Valgrind complains that we pass uninitialized data to the kernel.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoCleanup: initialize data to 0
Mathieu Desnoyers [Mon, 8 May 2017 12:15:20 +0000 (08:15 -0400)] 
Cleanup: initialize data to 0

Valgrind catches read of uninitialized data caused by the on-stack
"data" argument which ends up not being fully initialized (it contains a
union).

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: consumer data lock deadlock caused by monitor timer
Jérémie Galarneau [Mon, 8 May 2017 19:06:25 +0000 (15:06 -0400)] 
Fix: consumer data lock deadlock caused by monitor timer

The execution of the monitor timer takes the consumer data lock
which causes three threads to deadlock.

The consumer_thread_data_poll_thread takes the lock during
the teardown of a channel. This teardown stops the channel's
timers and, to ensure that the timers are not fired on a free'd
channel, uses a custom SIG_TEARDOWN signal as a "bubble" inserted
the signal processing "queue". It then waits until this signal
has been processed to release the consumer data lock.

The sessiond_poll_thread is creating a channel and waits on
the consumer data lock.

Meanwhile, the timer thread is blocked on this same lock
during the processing of the monitor timer signal which
prevents the queue from being flushed, causing the destruction
of the channel to never reach completion.

There is no need to take the consumer data lock in the monitor
timer code since the channel's existence is guaranteed by
the SIG_TEARDOWN mechanism.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: assert() on null index_file in lttng_index_file_write()
Jonathan Rajotte [Mon, 24 Apr 2017 19:59:20 +0000 (15:59 -0400)] 
Fix: assert() on null index_file in lttng_index_file_write()

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: fail on relayd lookup when finding a relayd is expected
Jonathan Rajotte [Mon, 24 Apr 2017 19:32:15 +0000 (15:32 -0400)] 
Fix: fail on relayd lookup when finding a relayd is expected

An actual relayd lookup error leads to using the code path of a local
handling. Since stream->index_file is NULL when expecting a relayd, using
the code path for local handling results in an invalid access.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: use lttng_read() wrapper instead of read()
Jérémie Galarneau [Mon, 8 May 2017 15:09:41 +0000 (11:09 -0400)] 
Clean-up: use lttng_read() wrapper instead of read()

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: NULL pointer dereference in lttng_condition_serialize
Jérémie Galarneau [Sun, 7 May 2017 19:51:42 +0000 (15:51 -0400)] 
Fix: NULL pointer dereference in lttng_condition_serialize

Reported-by: Coverity Scan
*** CID 1374823:  Null pointer dereferences  (REVERSE_INULL)

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: Exclusion check iterates multiple times on same array
Francis Deslauriers [Fri, 5 May 2017 17:45:36 +0000 (13:45 -0400)] 
Fix: Exclusion check iterates multiple times on same array

When specifying exclusions not contained in the event string warning
message is printed more than once.

For example, running the following command:

  lttng enable-event -u 'event_name_*' --exclude=not_event,other_event,my_event

Will result in this warning:
  Warning: Event event_name_*: not_event does not exclude any events from event_name_*
  Warning: Event event_name_*: other_event does not exclude any events from event_name_*
  Warning: Event event_name_*: my_event does not exclude any events from event_name_*
  Warning: Event event_name_*: other_event does not exclude any events from event_name_*
  Warning: Event event_name_*: my_event does not exclude any events from event_name_*
  Warning: Event event_name_*: my_event does not exclude any events from event_name_*

The following should be printed:
  Warning: Event event_name_*: not_event does not exclude any events from event_name_*
  Warning: Event event_name_*: other_event does not exclude any events from event_name_*
  Warning: Event event_name_*: my_event does not exclude any events from event_name_*

This is due to a bad indexing of the exclusions array.

Since we are already iterating on the exclusions array, pass the
exclusions directly with check_exclusion_subset().

Signed-off-by: Francis Deslauriers <francis.deslauriers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: return of free'd string on error in strutils_split()
Jérémie Galarneau [Sat, 6 May 2017 19:20:29 +0000 (15:20 -0400)] 
Fix: return of free'd string on error in strutils_split()

Reported-by: Coverity Scan
CID 1374808 (#1 of 1): Use after free (USE_AFTER_FREE)
use_after_free: Using freed pointer substrings.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: free of uninitialized value on error path
Jérémie Galarneau [Sat, 6 May 2017 19:08:31 +0000 (15:08 -0400)] 
Fix: free of uninitialized value on error path

Reported-by: Coverity Scan
CID 1374805 (#1 of 1): Uninitialized pointer read (UNINIT)
uninit_use_in_call: Using uninitialized value extended when
calling free.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoSilence bogus Coverity warning of uninitialized value
Jérémie Galarneau [Sat, 6 May 2017 19:04:27 +0000 (15:04 -0400)] 
Silence bogus Coverity warning of uninitialized value

Coverity complains that struct lttng_trigger_comm's
payload field is not initialized. "payload" is a flexible
array member which should be ignored. Normally, a such a
member _could_ result in additional padding added at the
end of the structure. In this case, the structure is declared
as packed.

Nonetheless, using a designated initializer gets rid of the
ambiguity and silences Coverity.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoSilence bogus Coverity warning of uninitialized value
Jérémie Galarneau [Sat, 6 May 2017 18:59:48 +0000 (14:59 -0400)] 
Silence bogus Coverity warning of uninitialized value

Coverity complains that struct lttng_notification_comm's
payload field is not initialized. "payload" is a flexible
array member which should be ignored. Normally, a such a
member _could_ result in additional padding added at the
end of the structure. In this case, the structure is declared
as packed.

Nonetheless, using a designated initializer gets rid of the
ambiguity and silences Coverity.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoSilence bogus Coverity warning of uninitialized value
Jérémie Galarneau [Sat, 6 May 2017 18:54:33 +0000 (14:54 -0400)] 
Silence bogus Coverity warning of uninitialized value

Coverity complains that struct lttng_condition_comm's payload
field is not initialized. "payload" is a flexible array
member which should be ignored. Normally, a such a member
_could_ result in additional padding added at the end of the
structure. In this case, the structure is declared as packed.

Nonetheless, using a designated initializer gets rid of the
ambiguity and silences Coverity.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoSilence bogus Coverity warning of uninitialized value
Jérémie Galarneau [Sat, 6 May 2017 18:43:46 +0000 (14:43 -0400)] 
Silence bogus Coverity warning of uninitialized value

Coverity complains that struct lttng_evaluation_comm's payload
field is not initialized. "payload" is a flexible array
member which should be ignored. Normally, a such a member
_could_ result in additional padding added at the end of the
structure. In this case, the structure is declared as packed.

Nonetheless, using a designated initializer gets rid of the
ambiguity and silences Coverity.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: dereference before null check of channel attributes
Jérémie Galarneau [Sat, 6 May 2017 18:34:42 +0000 (14:34 -0400)] 
Fix: dereference before null check of channel attributes

Reported-by: Coverity Scan
CID 1374802 (#1 of 1): Dereference before null check (REVERSE_INULL)
check_after_deref: Null-checking attr suggests that it may be null,
but it has already been dereferenced on all paths leading to the check.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: memory leak of client_list_element
Jérémie Galarneau [Sat, 6 May 2017 18:31:22 +0000 (14:31 -0400)] 
Fix: memory leak of client_list_element

Reported-by: Coverity Scan
CID 1374799:  Resource leaks  (RESOURCE_LEAK)
Variable "client_list_element" going out of scope leaks the storage
it points to.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: unchecked lttng_dynamic_buffer_set_size return value
Jérémie Galarneau [Sat, 6 May 2017 18:29:19 +0000 (14:29 -0400)] 
Fix: unchecked lttng_dynamic_buffer_set_size return value

Reported-by: Coverity Scan
*** CID 1374796:  Error handling issues  (CHECKED_RETURN)

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd 2.10 release beer name and description
Jérémie Galarneau [Sat, 6 May 2017 01:36:59 +0000 (21:36 -0400)] 
Add 2.10 release beer name and description

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoBuild: missing includes for ssize_t definition on Cygwin
Jérémie Galarneau [Sat, 6 May 2017 01:10:19 +0000 (21:10 -0400)] 
Build: missing includes for ssize_t definition on Cygwin

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: consumer-timer.c includes ust-ctl.h even --without-lttng-ust
Jérémie Galarneau [Fri, 5 May 2017 22:39:43 +0000 (18:39 -0400)] 
Fix: consumer-timer.c includes ust-ctl.h even --without-lttng-ust

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: missing header in Makefile breaks the dist build
Jérémie Galarneau [Fri, 5 May 2017 22:30:52 +0000 (18:30 -0400)] 
Fix: missing header in Makefile breaks the dist build

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests fix: tracefile-size tests assume PAGE_SIZE subbuffers
Jérémie Galarneau [Fri, 5 May 2017 22:23:25 +0000 (18:23 -0400)] 
Tests fix: tracefile-size tests assume PAGE_SIZE subbuffers

The new subbuffer default sizes break this test as it assumes
that the default size of subbuffers is of 1 page.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: use of uninitialized channel attributes in client
Jérémie Galarneau [Fri, 5 May 2017 20:07:43 +0000 (16:07 -0400)] 
Fix: use of uninitialized channel attributes in client

The channel attributes used to retrieve the defaults to use
are not zero-initialized which is a problem now that the extended
pointer is used to determine whether or not the structure was
allocated on stack by the user (for backward compatibility) or
dynamically using the new lttng_channel_create() interface.

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: only declare help_msg in embedded help case
Jérémie Galarneau [Fri, 5 May 2017 19:49:46 +0000 (15:49 -0400)] 
Clean-up: only declare help_msg in embedded help case

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: use of session_name instead of channel_name in condition hash
Jérémie Galarneau [Fri, 5 May 2017 19:36:15 +0000 (15:36 -0400)] 
Fix: use of session_name instead of channel_name in condition hash

Reported-by: Coverity Scan
** CID 1374796:  Error handling issues  (CHECKED_RETURN)
/src/lib/lttng-ctl/channel.c: 84 in receive_message()

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: lttng-live: send HUP reply when per-PID streams are gone
Mathieu Desnoyers [Tue, 2 May 2017 14:37:28 +0000 (10:37 -0400)] 
Fix: lttng-live: send HUP reply when per-PID streams are gone

Currently, the "HUP" reply (hung up) is only sent when a session destroy
is performed and all data has been sent. However, with per-pid buffers,
application can come and go during the tracing session, so we need to
send the HUP reply for each individual stream that is gone.

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTest: use output_path instead of argument position
Jonathan Rajotte [Wed, 5 Apr 2017 14:53:41 +0000 (10:53 -0400)] 
Test: use output_path instead of argument position

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoBump default kernel, and UST per-uid/per-pid buffer size
Mathieu Desnoyers [Fri, 31 Mar 2017 14:04:20 +0000 (10:04 -0400)] 
Bump default kernel, and UST per-uid/per-pid buffer size

LTTng with current default buffer size often lead to discarded events,
which is not something we want as a first user impression.

The choice of default buffer size were made conservatively around 2010.
Since then, the memory available on typical systems has increased, and
so has the amount of instrumentation available. As an example, the
mid-2010 Macbook Pro had 2GB ram. The current 2017 Macbook specification
states 8GB ram, for a 4-fold installed memory size increase.

Increase the kernel tracer buffer size from:
4 x 256kB per core
to:
4 x 1MB per core

Increase the UST tracer per-uid buffer size from:
4 x 128kB per core
to
4 x 512kB per core

Increase the UST tracer per-pid buffer size from:
4 x 4kB per core
to
4 x 16kB per core

Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: syscall_table_nb_entry invalid value when no syscalls TPs are defined
Jonathan Rajotte [Wed, 15 Mar 2017 14:59:31 +0000 (10:59 -0400)] 
Fix: syscall_table_nb_entry invalid value when no syscalls TPs are defined

v3: change commit message to include information regarding off-by-one
problems induced by 'index' and the use of 'index' as value of
syscall_table_nb_entry.

--

fscanf on an empty file returns directly without assigning value to
'index' leading to assigning the value of an uninitialized variable to
syscall_table_nb_entry. This can result in memory allocation problems
when listing syscalls on 'lttng list --kernel --syscall'[1][2].

Fixes at the same time an off-by-one problem for the
syscall_table_nb_entry value and an off-by-one error on table memory
reallocation.

The index value returned by fscanf is an index starting at 0. It is
later assigned to syscall_table_nb_entry which is used for memory
allocation and iteration during syscall_table_list. Forgetting to add 1
results in losing the last syscall during listing.

The parsed index value is also used to count how many elements should be
allocated during table reallocation, without any extra increment which
result in an off-by-one error. Hence, make sure to increment its value by
one when assigning the value of syscall_table_nb_entry. It does not
cause issues in practice because SYSCALL_TABLE_INIT_SIZE is nonzero, and
because we don't require the table to expand by more than the double of
its size at once (which could happen if we could have a hole in the
syscall table for instance).

Fixes #1091

[1] https://bugs.lttng.org/issues/1091
[2] https://bugs.launchpad.net/ubuntu/+source/linux/+bug/1671063/

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd string-utils to dist subdirs in libcommon
Jérémie Galarneau [Fri, 5 May 2017 18:02:47 +0000 (14:02 -0400)] 
Add string-utils to dist subdirs in libcommon

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests fix: initialize kernel extended channel attributes
Jérémie Galarneau [Fri, 5 May 2017 17:36:30 +0000 (13:36 -0400)] 
Tests fix: initialize kernel extended channel attributes

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests fix: initialize UST extended channel attributes
Jérémie Galarneau [Fri, 5 May 2017 16:17:17 +0000 (12:17 -0400)] 
Tests fix: initialize UST extended channel attributes

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng-enable-event(1): document globbing patterns in event names and filters
Philippe Proulx [Fri, 17 Feb 2017 03:56:15 +0000 (22:56 -0500)] 
lttng-enable-event(1): document globbing patterns in event names and filters

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_java_log4j
Philippe Proulx [Sat, 18 Feb 2017 21:03:19 +0000 (16:03 -0500)] 
Tests: add globbing pattern tests to test_java_log4j

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_java_jul
Philippe Proulx [Sat, 18 Feb 2017 21:03:05 +0000 (16:03 -0500)] 
Tests: add globbing pattern tests to test_java_jul

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_python_logging
Philippe Proulx [Sat, 18 Feb 2017 20:10:27 +0000 (15:10 -0500)] 
Tests: add globbing pattern tests to test_python_logging

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_valid_filter
Philippe Proulx [Fri, 17 Feb 2017 08:57:16 +0000 (03:57 -0500)] 
Tests: add globbing pattern tests to test_valid_filter

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_invalid_filter
Philippe Proulx [Fri, 17 Feb 2017 03:43:10 +0000 (22:43 -0500)] 
Tests: add globbing pattern tests to test_invalid_filter

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_event_wildcard
Philippe Proulx [Fri, 17 Feb 2017 03:43:37 +0000 (22:43 -0500)] 
Tests: add globbing pattern tests to test_event_wildcard

This patch also increases the test's channel sub-buffer size and count
because testing with `*` generates a lot of events and there are always
discarded ones.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
7 years agoTests: add globbing pattern tests to test_exclusion
Philippe Proulx [Fri, 17 Feb 2017 03:42:34 +0000 (22:42 -0500)] 
Tests: add globbing pattern tests to test_exclusion

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests: utils: add gen-ust-nevents-str util
Philippe Proulx [Fri, 17 Feb 2017 08:53:43 +0000 (03:53 -0500)] 
Tests: utils: add gen-ust-nevents-str util

This program generates a given number of UST events, each one having
in its payload the next command-line argument string in a cycle:

    gen-ust-nevents-str 10 hello world its me

will generate 10 events with the following strings:

    hello
    world
    its
    me
    hello
    world
    its
    me
    hello
    world

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests: add string-utils library unit tests
Philippe Proulx [Fri, 17 Feb 2017 03:01:25 +0000 (22:01 -0500)] 
Tests: add string-utils library unit tests

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd support for "full" star globbing patterns in event names and filters
Philippe Proulx [Wed, 15 Feb 2017 16:38:36 +0000 (11:38 -0500)] 
Add support for "full" star globbing patterns in event names and filters

This patch adds the support for "full" star-only globbing patterns to be
used in event names and filter literal strings. A star-only globbing
pattern is a globbing pattern with the star (`*`) being the only special
character. This means `?` and character sets (`[abc-k]`) are not
supported here. We cannot support them without a strategy to
differentiate the globbing pattern because `?` and `[` are not special
characters in event names passed on the command line and filter literal
strings right now. The eventual strategy to support them would probably
look like this for event names:

    lttng enable-event --userspace --glob 'hell?-wo*rl[Ddz]42'

and like this for filter strings:

    filename =* "?sys*.[ch]"

The reason this patch adds the feature for both the event names and the
filter strings at the same time is that, for some agent domains, a
filter string is used to filter the logger name. For example:

    lttng enable-event --python 'hello*world'

In this case, the UST event name is always `lttng_python`, but a filter
string is added to the event rule:

    logger_name == "hello*world"

If I don't add support for filter strings in this patch, then the
globbing feature for event names would not work for all the domains.

src/bin/lttng/commands/enable_events.c
--------------------------------------
The exclusion validation code is cleaner. strutils_split() is used to
split the list (which also supports `\,` to escape delimiters). Then, if
the event name is a globbing pattern which only contains a wildcard star
at the end (the only valid globbing pattern before this patch), the
exclusions which also only contain a wildcard star at the end or no star
at all are validated like it was done previously, with the exception
that escape characters are considered now (that is, in the exclusion
`hello\*world`, `\*` is parsed as is: the star is not a wildcard).

src/bin/lttng-sessiond/cmd.c
----------------------------
The event name validation function is removed because the only thing it
checks is that a star can only appear at the end of the name. This is
not true anymore.

It is expected that the tracers's globbing matching algorithm expect
a globbing pattern without two or more consecutive stars:

    hello**world

Thus in _cmd_enable_event(), strutils_normalize_star_glob_pattern() is
used to "normalize" the star globbing patterns of event names and
exclusion names in place (if they exist). Normalizing here means
crushing consecutive stars as a single one, without considering escaped
stars:

    hello*\***world**** -> hello*\**world*

Note that this also means that the event and exclusion names given by
the user are not necessarily the ones remaining after the enable-event
command is executed. This should not be a problem as `lttng status`
shows the normalized names and normalization is an identity function
when the string is already normalized.

src/lib/lttng-ctl/filter/filter-visitor-generate-ir.c
-----------------------------------------------------
The literal string transformation is modified to include the type of
literal string in the node amongst:

* IR_LOAD_STRING_TYPE_PLAIN
* IR_LOAD_STRING_TYPE_GLOB_STAR_END
* IR_LOAD_STRING_TYPE_GLOB_STAR

This type is used for post-validation and bytecode translation.

src/lib/lttng-ctl/filter/filter-bytecode.h
src/lib/lttng-ctl/filter/filter-visitor-generate-bytecode.c
-----------------------------------------------------------
A new load bytecode operation is added: FILTER_OP_LOAD_STAR_GLOB_STRING.
When this operation is executed, it should load a string literal as a
full star globbing pattern. The star-at-the-end-only use case is still
expected to be handled by the FILTER_OP_LOAD_STRING operation to avoid
changing anything to the current behaviour.

src/bin/lttng-sessiond/lttng-ust-abi.h
--------------------------------------
Version 7.1 bumped to version 7.2 because a new "load" filter operation
is added to the list of bytecode operations, but the current operation
codes are not changed, so a 7.2 filter interpreter should interpret a
7.1 filter bytecode just fine.

src/common/kernel-ctl/kernel-ioctl.h
------------------------------------
Version 2.2 bumped to version 2.3 because a new "load" filter operation
is added to the list of bytecode operations, but the current operation
codes are not changed, so a 2.3 filter interpreter should interpret a
2.2 filter bytecode just fine.

src/lib/lttng-ctl/filter/filter-visitor-ir-normalize-glob-patterns.c
--------------------------------------------------------------------
This IR visitor normalizes the literal string nodes when their type is
IR_LOAD_STRING_TYPE_GLOB_STAR_END or IR_LOAD_STRING_TYPE_GLOB_STAR.

src/lib/lttng-ctl/filter/filter-visitor-ir-validate-globbing.c
--------------------------------------------------------------
This IR visitor validates that:

1. When there's a binary operation between two literal strings, if one
   of them has the IR_LOAD_STRING_TYPE_GLOB_STAR type, the other one has
   the IR_LOAD_STRING_TYPE_PLAIN type.

   In other words, you cannot compare two globbing patterns, except for
   two globbing patterns with only a star at the end for backward
   compatibility reasons.

2. When there's a binary operation between two literal strings, if one
   of them is a (full) star globbing pattern, the binary operation is
   either == or !=.

src/lib/lttng-ctl/filter/filter-visitor-ir-validate-string.c
------------------------------------------------------------
The code to ensure that a wildcard star can only appear at the end of a
literal string is removed.

src/lib/lttng-ctl/lttng-ctl.c
-----------------------------
New visitors are called.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd string-utils convenience library
Philippe Proulx [Fri, 17 Feb 2017 02:58:19 +0000 (21:58 -0500)] 
Add string-utils convenience library

The new src/common/string-utils/libstring-utils.la library has a few
utility functions to manipulate and check strings. See string-utils.h
for more details.

One such function which should prove useful in this codebase is
strutils_split(): it splits an input string with a given delimiter and
returns a NULL-terminated array of newly allocated substrings. This
function supports escaping the delimiter with `\` in the input string.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agodoc: lttng-destroy(1): document --no-wait option
Philippe Proulx [Tue, 4 Apr 2017 21:27:58 +0000 (17:27 -0400)] 
doc: lttng-destroy(1): document --no-wait option

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agodoc: lttng-stop(1): replace tabs with spaces
Philippe Proulx [Tue, 4 Apr 2017 21:28:20 +0000 (17:28 -0400)] 
doc: lttng-stop(1): replace tabs with spaces

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agodoc/man: add typical `$` and `#` prompts to command lines
Philippe Proulx [Wed, 15 Mar 2017 00:28:35 +0000 (20:28 -0400)] 
doc/man: add typical `$` and `#` prompts to command lines

It is more instinctive for the typical reader to immediately recognize
command lines when they start with the classic prompts.

On the online version of the man pages, those prompts are treated
specially to make them non-selectable. This makes it possible to copy
multiple command lines at once (without copying the prompts) and to
paste them to your shell.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agobin/lttng: remove double "help" command and sort list
Philippe Proulx [Wed, 30 Nov 2016 20:24:36 +0000 (15:24 -0500)] 
bin/lttng: remove double "help" command and sort list

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agolttng help: use command's --help directly
Philippe Proulx [Wed, 30 Nov 2016 20:40:43 +0000 (15:40 -0500)] 
lttng help: use command's --help directly

Do the same thing for both `lttng cmd --help` and
`lttng help cmd`, so that if we change what's done, the
behaviour remains the same for both methods.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd --enable-embedded-help option to embed --help messages in binaries
Philippe Proulx [Thu, 1 Dec 2016 06:29:38 +0000 (01:29 -0500)] 
Add --enable-embedded-help option to embed --help messages in binaries

This patch adds a configuration option to embed the help message within
the various executables of LTTng-tools instead of always launching the
man pager. This applies to the following commands:

    lttng --help
    lttng CMD --help
    lttng help CMD
    lttng-crash --help
    lttng-relayd --help
    lttng-sessiond --help

This is meant to be used by distributions which remove man pages or do
not have a man pager (embedded distributions, mostly). For example,
Buildroot is known to remove all man pages before it creates the final
image:

    rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man

If you pass the `--enable-embedded-help` option to the `configure`
script:

1. The configure script checks if `man` exists in the `PATH` environment
   variable. This tool is needed to generate the text versions of the
   man pages.

2. When you build LTTng-tools with `make`, the man pages are generated
   as usual (or they already exist in their troff version from a
   tarball), and their text versions are generated with `man`, with a
   fixed width set to 80 columns.

3. The text versions of the man pages are converted to literal C strings
   thanks to some `sed` magic:

   a. Replace `\` with `\\`.
   b. Replace `"` with `\"`.
   c. Add `"` prefix and `\n"` suffix to each line.

   This file is named `NAME.SECTION.h`, where `NAME` is the name of the
   man page and `SECTION` is its section. For example,
   `lttng-create.1.h`.

   I needed to add a `.PRECIOUS` target in `doc/man/Makefile.am` because
   otherwise `make` treats the troff man page files as intermediate
   files and removes them automatically. Then they need to be rebuilt
   to be installed.

4. In each C file where to show a help message, we check if the
   `--enable-embedded-help` option is set, and if so, we assign the
   included help message string to a static variable to be printed
   instead of executing the man pager.

This string added to the object file in #4 takes binary space, why is
why the `--enable-embedded-help` option is turned off by default.

The directories in the "master" `SUBDIRS` (`Makefile.am`) are reordered
so that `doc` is built before `src` since there's a direct dependency
when you pass `--enable-embedded-help`.

The `--disable-man-pages` and `--enable-embedded-help` options do not
form a valid configuration.

Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoExpose monitor timer interval to lttngctl and client
Jérémie Galarneau [Fri, 5 May 2017 03:53:50 +0000 (23:53 -0400)] 
Expose monitor timer interval to lttngctl and client

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoTests: add placeholder symbol to allow unit tests to link
Jérémie Galarneau [Fri, 5 May 2017 03:53:27 +0000 (23:53 -0400)] 
Tests: add placeholder symbol to allow unit tests to link

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoImplement consumer ring buffer position sampling
Jérémie Galarneau [Fri, 5 May 2017 03:52:24 +0000 (23:52 -0400)] 
Implement consumer ring buffer position sampling

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd new snapshot ustctl API
Jérémie Galarneau [Fri, 5 May 2017 03:38:55 +0000 (23:38 -0400)] 
Add new snapshot ustctl API

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd kernctl RING_BUFFER_SNAPSHOT_SAMPLE_POSITIONS command
Jérémie Galarneau [Fri, 5 May 2017 03:30:56 +0000 (23:30 -0400)] 
Add kernctl RING_BUFFER_SNAPSHOT_SAMPLE_POSITIONS command

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoHandle trigger registration and unregistration in sessiond
Jérémie Galarneau [Fri, 5 May 2017 03:29:51 +0000 (23:29 -0400)] 
Handle trigger registration and unregistration in sessiond

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoStart notification subsystem thread in sessiond initialization
Jérémie Galarneau [Fri, 5 May 2017 03:27:04 +0000 (23:27 -0400)] 
Start notification subsystem thread in sessiond initialization

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: fix comment type in lttng-consumerd.c
Jérémie Galarneau [Fri, 5 May 2017 03:24:27 +0000 (23:24 -0400)] 
Clean-up: fix comment type in lttng-consumerd.c

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd the sessiond notification-handling subsystem
Jérémie Galarneau [Fri, 5 May 2017 03:17:39 +0000 (23:17 -0400)] 
Add the sessiond notification-handling subsystem

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: comment fix in agent_thread_manage_registration
Jérémie Galarneau [Fri, 5 May 2017 03:15:37 +0000 (23:15 -0400)] 
Clean-up: comment fix in agent_thread_manage_registration

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd client notification API
Jérémie Galarneau [Fri, 5 May 2017 03:08:47 +0000 (23:08 -0400)] 
Add client notification API

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd utils_get_count_order_u64 to utils
Jérémie Galarneau [Fri, 5 May 2017 02:59:18 +0000 (22:59 -0400)] 
Add utils_get_count_order_u64 to utils

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoImplement poll mask modification support in poll wrappers
Jérémie Galarneau [Fri, 5 May 2017 02:58:25 +0000 (22:58 -0400)] 
Implement poll mask modification support in poll wrappers

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd the container_of() macro to macro.h
Jérémie Galarneau [Fri, 5 May 2017 02:56:30 +0000 (22:56 -0400)] 
Add the container_of() macro to macro.h

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd pipe_release utils to the pipe wrapper
Jérémie Galarneau [Fri, 5 May 2017 02:54:17 +0000 (22:54 -0400)] 
Add pipe_release utils to the pipe wrapper

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd named pipe support to the pipe wrapper
Jérémie Galarneau [Fri, 5 May 2017 02:53:22 +0000 (22:53 -0400)] 
Add named pipe support to the pipe wrapper

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd non_block version of functions to UNIX socket wrapper
Jérémie Galarneau [Fri, 5 May 2017 04:14:02 +0000 (00:14 -0400)] 
Add non_block version of functions to UNIX socket wrapper

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd lttng_buffer_view util
Jérémie Galarneau [Fri, 5 May 2017 02:49:35 +0000 (22:49 -0400)] 
Add lttng_buffer_view util

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoAdd lttng_dynamic_buffer util
Jérémie Galarneau [Fri, 5 May 2017 02:48:25 +0000 (22:48 -0400)] 
Add lttng_dynamic_buffer util

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoClean-up: fix typo in sessiond main.c comment
Jérémie Galarneau [Thu, 2 Mar 2017 22:22:08 +0000 (17:22 -0500)] 
Clean-up: fix typo in sessiond main.c comment

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoDocs: fix comment describing ust_cmd_queue
Jérémie Galarneau [Wed, 1 Mar 2017 17:15:11 +0000 (12:15 -0500)] 
Docs: fix comment describing ust_cmd_queue

Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoPort: Link with no-undefined on Windows
Michael Jeanson [Thu, 2 Feb 2017 22:09:43 +0000 (17:09 -0500)] 
Port: Link with no-undefined on Windows

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoPort: win32 DLLs don't support hidden symbols
Michael Jeanson [Thu, 26 Jan 2017 20:09:22 +0000 (15:09 -0500)] 
Port: win32 DLLs don't support hidden symbols

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoPort: add cygwin support to endian compat
Michael Jeanson [Thu, 26 Jan 2017 20:09:21 +0000 (15:09 -0500)] 
Port: add cygwin support to endian compat

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: Remove unused headers
Michael Jeanson [Thu, 26 Jan 2017 19:55:46 +0000 (14:55 -0500)] 
Fix: Remove unused headers

This is a portability fix, these headers are unused and not available on
some platforms.

Signed-off-by: Michael Jeanson <mjeanson@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
7 years agoFix: tests: register thread for RCU operations.
Jonathan Rajotte [Thu, 26 Jan 2017 19:53:03 +0000 (14:53 -0500)] 
Fix: tests: register thread for RCU operations.

Signed-off-by: Jonathan Rajotte <jonathan.rajotte-julien@efficios.com>
Signed-off-by: Jérémie Galarneau <jeremie.galarneau@efficios.com>
This page took 0.046787 seconds and 4 git commands to generate.