X-Git-Url: https://git.liburcu.org/?a=blobdiff_plain;f=ltt%2Fbranches%2Fpoly%2FQUICKSTART;h=a5fbfb95b654683b46895a31816dc1c2b54290c6;hb=8ede3ed94ddaadbe5b4714c597723ad40d51375f;hp=d497b4df6d926345dce5e744a1c3895f8d4ed49d;hpb=89535b775be8b260a5feed081699caf89a96000a;p=lttv.git diff --git a/ltt/branches/poly/QUICKSTART b/ltt/branches/poly/QUICKSTART index d497b4df..a5fbfb95 100644 --- a/ltt/branches/poly/QUICKSTART +++ b/ltt/branches/poly/QUICKSTART @@ -13,8 +13,21 @@ What you will typically want is to read sections 1 and 3 : install LTTng from binary packages and use it. If there are no packages ready for your system, you will have to install from sources (section 2) instead. -These operations are made for installing LTTng 0.3 on a linux 2.6.12-rc2-mm2 -kernel. Change the versions to fit your needs. +These operations are made for installing the LTTng 0.4 tracer on a +linux 2.6.12-rc4-mm2 kernel. You will also find instructions for installtion of +LTTV 0.6.x : the Linux Trace Toolkit Viewer. + +At this point, the -mm tree of the kernel is used because it has RelayFS support +in it. In a nearby future, a vanilla kernel 2.6.14 will be used, as RelayFS has +been integrated in the linux 2.6.14-rc series. + +The following lttng patch is necessary to have the tracing hooks in the kernel. +The following ltt-control module controls the tracing. + +Required programs and librairies are assumed to be automatically installed in an +installation with Debian or RPM packages. In the case of an installation from +sources, the dependencies are listed. + Author : Mathieu Desnoyers, September 2005 @@ -33,15 +46,46 @@ TODO ** Section 2 * Installation from sources ** *********************************************************** +* Prerequisites + +Tools needed to follow the package download steps : + +o wget +o bzip2 +o gzip +o tar + +You have to install the standard development librairies and programs necessary +to compile a kernel : + +(from Documentation/Changes in the Linux kernel tree) +o Gnu C 2.95.3 # gcc --version +o Gnu make 3.79.1 # make --version +o binutils 2.12 # ld -v +o util-linux 2.10o # fdformat --version +o module-init-tools 0.9.10 # depmod -V + +You might also want to have libncurses5 to have the text mode kernel +configuration menu, but there are alternatives. + +Prerequisites for LTTV 0.6.x installation are : + +gtk 2.4 or better development libraries (libgtk2.0, libgtk2.0-dev) +glib 2.4 or better development libraries (libglib2.0-0, libglib2.0-dev) +libpopt development libraries (libpopt0, libpopt-dev) +libpango development libraries (libpango1.0, libpango1.0-dev) +libc6 development librairies (libc6, libc6-dev) + + * Getting the LTTng packages su - mkdir /usr/src/lttng cd /usr/src/lttng (see http://ltt.polymtl.ca/lttng for package listing) -wget http://ltt.polymtl.ca/lttng/lttng-modules-0.2.tar.bz2 -wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2 -bzip2 -cd lttng-modules-0.2.tar.bz2 | tar xvof - +wget http://ltt.polymtl.ca/lttng/lttng-modules-0.3.tar.bz2 +wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.bz2 +bzip2 -cd lttng-modules-0.3.tar.bz2 | tar xvof - * Getting LTTng kernel sources @@ -53,49 +97,66 @@ wget http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc4/2.6.1 bzip2 -cd linux-2.6.12-rc4.tar.bz2 | tar xvof - cd linux-2.6.12-rc4 bzip2 -cd ../2.6.12-rc4-mm2.bz2 | patch -p1 -bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2 | patch -p1 +bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.bz2 | patch -p1 cd .. -mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.3 +mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.4 * Installing a LTTng kernel su - -cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 -make menuconfig - General setup - * Linux Trace Toolkit Instrumentation Support - M or * Linux Trace Toolkit Tracer +cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4 +make menuconfig (or make xconfig or make config) + Select the < Help > button if you are not familiar with kernel + configuration. + Items preceded by [*] means they has to be built into the kernel. + Items preceded by [M] means they has to be built as modules. + Items preceded by [ ] means they should be removed. + go to the "General setup" section + Select the following options : + [*] Linux Trace Toolkit Instrumentation Support + [M] or [*] Linux Trace Toolkit Tracer + It makes no difference for the rest of the procedure whether the Tracer + is compiled built-in or as a module. do NOT activate (not ready yet) : - Align Linux Trace Toolkit Traces - Activate Linux Trace Toolkit Heartbeat Timer + [ ] Align Linux Trace Toolkit Traces + [ ] Activate Linux Trace Toolkit Heartbeat Timer IMPORTANT : This is enabled by default : you must disable it! + Select + Select + Select make -make install make modules_install +make install -The first time you use relayfs, you have to specify a mount point in you system: -mkdir /mnt/relayfs -echo "relayfs /mnt/relayfs relayfs rw 0 0" \ - >> /etc/fstab +You must activate relayfs and specify a mount point. This is typically done in +fstab such that it happens at boot time. -Depending on your boot loader, you may want to execute : -update-grub or lilo +If you have never used RelayFS before, these operation would do this for you : + +mkdir /mnt/relayfs +cp /etc/fstab /etc/fstab.lttng.bkp +echo "relayfs /mnt/relayfs relayfs rw 0 0" >> /etc/fstab reboot + Select the Linux 2.6.12-rc4-mm2-lttng-0.4 kernel in your boot loader. + * Install the ltt-modules su - -cd /usr/src/lttng/lttng-modules-0.2 -KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make -KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make modules_install +cd /usr/src/lttng/lttng-modules-0.3 +KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4 make +KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4 make modules_install + +You need to load the ltt-control module to be able to control tracing from user +space. This is done by issuing the command : -note : at this stage, you might want to execute modprobe ltt-control -and you might also want to do this : +You can automate at boot time loading the ltt-control module by : + echo ltt-control >> /etc/modules @@ -103,9 +164,9 @@ echo ltt-control >> /etc/modules su - cd /usr/src -wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.3-20092005.tar.gz -gzip -cd LinuxTraceToolkitViewer-0.6.3-20092005.tar.gz | tar xvof - -cd LinuxTraceToolkitViewer-0.6.3-20092005 +wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.5-21092005.tar.gz +gzip -cd LinuxTraceToolkitViewer-0.6.5-21092005.tar.gz | tar xvof - +cd LinuxTraceToolkitViewer-0.6.5-21092005 (refer to README to see the development libraries that must be installed on you system) ./configure @@ -137,7 +198,7 @@ root). Start tracing : -lttctl -n trace -d -l /mnt/relayfs/ltt -t /tmp/trace1 +lttctl -n trace -d -l /mnt/relayfs/ltt -t /tmp/trace Stop tracing and destroy trace channels : @@ -168,9 +229,9 @@ see lttv -m textDump --help for detailed command line options of textDump. su - cd /usr/src -wget http://ltt.polymtl.ca/packages/genevent-0.1.tar.gz -gzip -cd genevent-0.1.tar.gz | tar xvof - -cd genevent-0.1 +wget http://ltt.polymtl.ca/packages/genevent-0.2.tar.gz +gzip -cd genevent-0.2.tar.gz | tar xvof - +cd genevent-0.2 make make install @@ -184,14 +245,14 @@ cp process.xml yourfacility.xml cd /tmp /usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/yourfacility.xml cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \ - /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt + /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4/include/linux/ltt cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \ - /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/ltt + /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4/ltt * edit the kernel file you want to instrument - Add #include at the beginning of the file. - Add a call to the tracing functions. See their names and parameters in - /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt/ltt-facility-yourfacility.h + /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4/include/linux/ltt/ltt-facility-yourfacility.h