+++ /dev/null
-<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
-<html>
-<head>
- <title>Linux Trace Toolkit Next Generation Manual</title>
-</head>
- <body>
-
-<h1>Linux Trace Toolkit Next Generation Manual</h1>
-
-Author : Mathieu Desnoyers, September 2005<br>
-Last update : January 21st, 2009<br>
-(originally known as the LTTng QUICKSTART guide)
-
-<h2>Table of Contents</h2>
-
-<ul>
-<li><a href="#intro" name="TOCintro">Introduction</a></li>
-<ul>
-<li><a href="#arch" name="TOCarch">Supported architectures</a></li>
-</ul>
-
-<li><a href="#section1" name="TOCsection1">Installing LTTng and LTTV from
-sources</a></li>
-<ul>
-<li><a href="#prerequisites" name="TOCprerequisites">Prerequisistes</li>
-<li><a href="#getlttng" name="TOCgetlttng">Getting the LTTng packages</li>
-<li><a href="#getlttngsrc" name="TOCgetlttngsrc">Getting the LTTng kernel sources</li>
-<li><a href="#installlttng" name="TOCinstalllttng">Installing a LTTng kernel</li>
-<li><a href="#editconfig" name="TOCeditconfig">Editing the system wide
-configuration</a>
-<li><a href="#getlttctl" name="TOCgetlttctl">Getting and installing the
-ltt-control package</li>
-<li><a href="#userspacetracing" name="TOCuserspacetracing">Userspace Tracing</li>
-<li><a href="#getlttv" name="TOCgetlttv">Getting and installing the LTTV package</ul>
-
-<li><a href="#section2" name="TOCsection2">Using LTTng and LTTV</a></li>
-<ul>
-<li><a href="#uselttvgui" name="TOCuselttvgui">Use graphical LTTV to control
-tracing and analyse traces</a></li>
-<li><a href="#uselttngtext" name="TOCuselttngtext">Use text mode LTTng to
-control tracing</a></li>
-<li><a href="#uselttvtext" name="TOCuselttvtext">Use text mode LTTV</a></li>
-<li><a href="#hybrid" name="TOChybrid">Tracing in "Hybrid" mode</a></li>
-<li><a href="#flight" name="TOCflight">Tracing in flight recorder mode</a></li>
-</ul>
-
-<li><a href="#section3" name="TOCsection3">Adding kernel and user-space
-instrumentation</a>
-<ul>
-<li><a href="#kerneltp" name="TOCkerneltp">Adding kernel instrumentation</a></li>
-<li><a href="#usertp" name="TOCusertp">Adding userspace instrumentation</a></li>
-</ul>
-
-<li><a href="#section4" name="TOCsection4">Creating Debian and RPM packages
-from LTTV</a></li>
-<ul>
-<li><a href="#pkgdebian" name="TOCpkgdebian">Create custom LTTV Debian
-<li><a href="#pkglttng" name="TOCpkglttng">Create custom LTTng packages</a></li>
-</ul>
-
-</ul>
-
-<hr />
-
-<h2><a href="#TOCintro" name="intro">Introduction</a></h2>
-<p>
-This document is made of five parts : the first one explains how
-to install LTTng and LTTV from sources, the second one describes the steps
-to follow to trace a system and view it. The third part explains
-briefly how to add a new trace point to the kernel and to user space
-applications. The fourth and last part explains how to create Debian or RPM
-packages from the LTTng and LTTV sources.
-<p>
-These operations are made for installing the LTTng 0.86 tracer on a linux 2.6.X
-kernel. You will also find instructions for installation of LTTV 0.12.x : the
-Linux Trace Toolkit Viewer.
-To see the list of compatibilities between LTTng, ltt-control, LTTV, please
-refer to :
-<a
-href="http://ltt.polymtl.ca/svn/trunk/lttv/doc/developer/lttng-lttv-compatibility.html">LTTng+LTTV versions compatibility</a>
-
-The ongoing work had the Linux Kernel Markers integrated in the mainline Linux
-kernel since Linux 2.6.24 and the Tracepoints since 2.6.28. In its current
-state, the lttng patchset is necessary to have the trace clocksource, the
-instrumentation and the LTTng high-speed data extraction mechanism added to the
-kernel.
-
-<br>
-<br>
-<h3><a href="#TOCarch" name="arch">Supported architectures</a></h3>
-<br>
-LTTng :<br>
-<br>
-<li> x86 32/64 bits
-<li> PowerPC 32 and 64 bits
-<li> ARMv7 OMAP3
-<li> Other ARM (with limited timestamping precision, e.g. 1HZ. Need
-architecture-specific support for better precision)
-<li> MIPS
-<li> sh (partial architecture-specific instrumentation)
-<li> sparc64 (partial architecture-specific instrumentation)
-<li> s390 (partial architecture-specific instrumentation)
-<li> Other architectures supported without architecture-specific instrumentation
-and with low-resolution timestamps.<br>
-<br>
-<br>
-LTTV :<br>
-<br>
-<li> Intel 32/64 bits
-<li> PowerPC 32 and 64 bits
-<li> Possibly others. Takes care of endianness and type size difference between
-the LTTng traces and the LTTV analysis tool.
-
-<hr />
-
-
-<h2><a href="#TOCsection1" name="section1">Installation from sources</a></h2>
-<p>
-
-<h3><a href="#TOCprerequisites" name="prerequisites">Prerequisites</a></h3>
-<ul>
-<p>
-Tools needed to follow the package download steps :
-
-<li>wget
-<li>bzip2
-<li>gzip
-<li>tar
-
-<p>
-You have to install the standard development libraries and programs necessary
-to compile a kernel :
-
-<PRE>
-(from Documentation/Changes in the Linux kernel tree)
-Gnu C 2.95.3 # gcc --version
-Gnu make 3.79.1 # make --version
-binutils 2.12 # ld -v
-util-linux 2.10o # fdformat --version
-module-init-tools 0.9.10 # depmod -V
-</PRE>
-
-<p>
-You might also want to have libncurses5 to have the text mode kernel
-configuration menu, but there are alternatives.
-
-<p>
-Prerequisites for LTTV 0.x.x installation are :
-
-<PRE>
-gcc 3.2 or better
-gtk 2.4 or better development libraries
- (Debian : libgtk2.0, libgtk2.0-dev)
- (Fedora : gtk2, gtk2-devel)
- note : For Fedora users : this might require at least core 3 from Fedora,
- or you might have to compile your own GTK2 library.
-glib 2.4 or better development libraries
- (Debian : libglib2.0-0, libglib2.0-dev)
- (Fedora : glib2, glib2-devel)
-libpopt development libraries
- (Debian : libpopt0, libpopt-dev)
- (Fedora : popt)
-libpango development libraries
- (Debian : libpango1.0, libpango1.0-dev)
- (Fedora : pango, pango-devel)
-libc6 development librairies
- (Debian : libc6, libc6-dev)
- (Fedora : glibc, glibc)
-</PRE>
-</ul>
-
-<li>Reminder</li>
-
-<p>
-See the list of compatibilities between LTTng, ltt-control and LTTV at :
-<a
-href="http://ltt.polymtl.ca/svn/trunk/lttv/doc/developer/lttng-lttv-compatibility.html">LTTng+LTTV
-versions compatibility</a>.
-
-
-<h3><a href="#TOCgetlttng" name="getlttng">Getting the LTTng packages</a></h3>
-
-<PRE>
-su -
-mkdir /usr/src/lttng
-cd /usr/src/lttng
-(see http://ltt.polymtl.ca/lttng for package listing)
-wget http://ltt.polymtl.ca/lttng/patch-2.6.X-lttng-0.x.xx.tar.bz2
-bzip2 -cd patch-2.6.X-lttng-0.x.xx.tar.bz2 | tar xvof -
-</PRE>
-
-
-<h3><a href="#TOCgetlttngsrc" name="getlttngsrc">Getting LTTng kernel sources</a></h3>
-
-<PRE>
-su -
-cd /usr/src
-wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.X.tar.bz2
-bzip2 -cd linux-2.6.X.tar.bz2 | tar xvof -
-cd linux-2.6.X
-- For LTTng 0.9.4- cat /usr/src/lttng/patch*-2.6.X-lttng-0.x.xx* | patch -p1
-- For LTTng 0.9.5+ apply the patches in the order specified in the series file,
- or use quilt
-cd ..
-mv linux-2.6.X linux-2.6.X-lttng-0.x.xx
-</PRE>
-
-
-<h3><a href="#TOCinstalllttng" name="installlttng">Installing a LTTng kernel</a></h3>
-
-<PRE>
-su -
-cd /usr/src/linux-2.6.X-lttng-0.x.xx
-make menuconfig (or make xconfig or make config)
- Select the < Help > button if you are not familiar with kernel
- configuration.
- Items preceded by [*] means they has to be built into the kernel.
- Items preceded by [M] means they has to be built as modules.
- Items preceded by [ ] means they should be removed.
- go to the "General setup" section
- Select the following options :
- [*] Prompt for development and/or incomplete code/drivers
- [*] Activate markers
- [*] Activate userspace markers ABI (experimental, optional)
- [*] Immediate value optimization (optional)
- [*] Linux Trace Toolkit Next Generation (LTTng) --->
- <M> or <*> Compile lttng tracing probes
- <M> or <*> Linux Trace Toolkit High-speed Lockless Data Relay
- <M> or <*> Linux Trace Toolkit Lock-Protected Data Relay
- <M> or <*> Linux Trace Toolkit Serializer
- <M> or <*> Linux Trace Toolkit Marker Control
- <M> or <*> Linux Trace Toolkit Tracer
- [*] Align Linux Trace Toolkit Traces
- <M> or <*> Support logging events from userspace
- [*] Support trace extraction from crash dump
- <M> or <*> Linux Trace Toolkit Trace Controller
- <M> or <*> Linux Trace Toolkit State Dump
- Select <Exit>
- Select <Exit>
- Select <Yes>
-make
-make modules_install
-(if necessary, create a initrd with mkinitrd or your preferate alternative)
-(mkinitrd -o /boot/initrd.img-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx)
-
--- on X86, X86_64
-make install
-reboot
-Select the Linux 2.6.X-lttng-0.x.xx kernel in your boot loader.
-
--- on PowerPC
-cp vmlinux.strip /boot/vmlinux-2.6.X-lttng-0.x.xx
-cp System.map /boot/System.map-2.6.X-lttng-0.x.xx
-cp .config /boot/config-2.6.X-lttng-0.x.xx
-depmod -ae -F /boot/System.map-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx
-mkinitrd /boot/initrd.img-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx
-(edit /etc/yaboot.conf to add a new entry pointing to your kernel : the entry
-that comes first is the default kernel)
-ybin
-select the right entry at the yaboot prompt (see choices : tab, select : type
-the kernel name followed by enter)
-Select the Linux 2.6.X-lttng-0.x.xx kernel in your boot loader.
---
-</PRE>
-
-<h3><a href="#TOCeditconfig" name="editconfig">Editing the system wide
-configuration</a></h3>
-
-<p>
-You must activate debugfs and specify a mount point. This is typically done in
-fstab such that it happens at boot time. If you have never used DebugFS before,
-these operation would do this for you :
-
-<PRE>
-mkdir /mnt/debugfs
-cp /etc/fstab /etc/fstab.lttng.bkp
-echo "debugfs /mnt/debugfs debugfs rw 0 0" >> /etc/fstab
-</PRE>
-
-<p>
-then, rebooting or issuing the following command will activate debugfs :
-<PRE>
-mount /mnt/debugfs
-</PRE>
-
-<p>
-You need to load the LTT modules to be able to control tracing from user
-space. This is done by issuing the following commands. Note however
-these commands load all LTT modules. Depending on what options you chose to
-compile statically, you may not need to issue all these commands.
-
-<PRE>
-modprobe ltt-trace-control
-modprobe ltt-marker-control
-modprobe ltt-tracer
-modprobe ltt-serialize
-modprobe ltt-relay
-modprobe ipc-trace
-modprobe kernel-trace
-modprobe mm-trace
-modprobe net-trace
-modprobe fs-trace
-modprobe jbd2-trace
-modprobe ext4-trace
-modprobe syscall-trace
-modprobe trap-trace
-#if locking tracing is wanted, uncomment the following
-#modprobe lockdep-trace
-</PRE>
-
-<p>
-If you want to have complete information about the kernel state (including all
-the process names), you need to load the ltt-statedump module. This is done by
-issuing the command :
-
-<PRE>
-modprobe ltt-statedump
-</PRE>
-<p>
-You can automate at boot time loading the ltt-control module by :
-
-<PRE>
-cp /etc/modules /etc/modules.bkp
-echo ltt-trace-control >> /etc/modules
-echo ltt-marker-control >> /etc/modules
-echo ltt-tracer >> /etc/modules
-echo ltt-serialize >> /etc/modules
-echo ltt-relay >> /etc/modules
-echo ipc-trace >> /etc/modules
-echo kernel-trace >> /etc/modules
-echo mm-trace >> /etc/modules
-echo net-trace >> /etc/modules
-echo fs-trace >> /etc/modules
-echo jbd2-trace >> /etc/modules
-echo ext4-trace >> /etc/modules
-echo syscall-trace >> /etc/modules
-echo trap-trace >> /etc/modules
-#if locking tracing is wanted, uncomment the following
-#echo lockdep-trace >> /etc/modules
-</PRE>
-
-
-<h3><a href="#TOCgetlttctl" name="getlttctl">Getting and installing the
-ltt-control package (on the traced machine)</a></h3>
-<p>
-(note : the ltt-control package contains lttd and lttctl. Although it has the
-same name as the ltt-control kernel module, they are *not* the same thing.)
-
-<PRE>
-su -
-cd /usr/src
-wget http://ltt.polymtl.ca/lttng/ltt-control-0.x-xxxx2006.tar.gz
-gzip -cd ltt-control-0.x-xxxx2008.tar.gz | tar xvof -
-cd ltt-control-0.x-xxxx2006
-(refer to README to see the development libraries that must be installed on you
-system)
-./configure
-make
-make install
-</PRE>
-
-<h3><a href="#TOCuserspacetracing" name="userspacetracing">Userspace tracing</a></h3>
-
-<PRE>
-Make sure you selected the kernel menuconfig option :
- <M> or <*> Support logging events from userspace
-And that the ltt-userspace-event kernel module is loaded if selected as a
-module.
-
-Simple userspace tracing is available through
-echo "some text to record" > /mnt/debugfs/ltt/write_event
-
-It will appear in the trace under event :
-channel : userspace
-event name : event
-</PRE>
-
-<h3><a href="#TOCgetlttv" name="getlttv">Getting and installing the LTTV package
-(on the visualisation machine, same
-or different from the visualisation machine)</a></h3>
-
-<PRE>
-su -
-cd /usr/src
-wget http://ltt.polymtl.ca/packages/lttv-0.x.xx-xxxx2008.tar.gz
-gzip -cd lttv-0.x.xx-xxxx2008.tar.gz | tar xvof -
-cd lttv-0.x.xx-xxxx2008
-(refer to README to see the development libraries that must be installed on your
-system)
-./configure
-make
-make install
-</PRE>
-
-<hr />
-
-
-<h2><a href="#TOCsection2" name="section2">Using LTTng and LTTV</a></h2>
-
-<li><b>IMPORTANT : Arm Linux Kernel Markers after each boot before tracing</b></li>
-<PRE>
-ltt-armall
-</PRE>
-
-<h3><a href="#TOCuselttvgui" name="uselttvgui">Use graphical LTTV to control
-tracing and analyse traces</a></h3>
-<PRE>
-lttv-gui (or /usr/local/bin/lttv-gui)
- - Spot the "Tracing Control" icon : click on it
- (it's a traffic light icon)
- - enter the root password
- - click "start"
- - click "stop"
- - Yes
- * You should now see a trace
-</PRE>
-
-<h3><a href="#TOCuselttngtext" name="uselttngtext">Use text mode LTTng to control tracing</a></h3>
-<PRE>
-The tracing can be controlled from a terminal by using the lttctl command (as
-root).
-
-Start tracing :
-
-lttctl -C -w /tmp/trace1 trace1
-
-Stop tracing and destroy trace channels :
-
-lttctl -D trace1
-
-see lttctl --help for details.
-</PRE>
-<p>
-(note : to see if the buffers has been filled, look at the dmesg output after
-lttctl -D or after stopping tracing from the GUI, it will show an event lost
-count. If it is the case, try using larger buffers. See lttctl --help to learn
-how. lttv now also shows event lost messages in the console when loading a trace
-with missing events or lost subbuffers.)
-
-<h3><a href="#TOCuselttvtext" name="uselttvtext">Use text mode LTTV</a></h3>
-<p>
-Feel free to look in /usr/local/lib/lttv/plugins to see all the text and
-graphical plugins available.
-<p>
-For example, a simple trace dump in text format is available with :
-<PRE>
-lttv -m textDump -t /tmp/trace
-</PRE>
-<p>
-See lttv -m textDump --help for detailed command line options of textDump.
-<p>
-It is, in the current state of the project, very useful to use "grep" on the
-text output to filter by specific event fields. You can later copy the timestamp
-of the events to the clipboard and paste them in the GUI by clicking on the
-bottom right label "Current time". Support for this type of filtering should
-be added to the filter module soon.
-
-<h3><a href="#TOChybrid" name="hybrid">Tracing in "Hybrid" mode</a></h3>
-<p>
-Starting from LTTng 0.5.105 and ltt-control 0.20, a new mode can be used :
-hybrid. It can be especially useful when studying big workloads on a long period
-of time.
-<p>
-When using this mode, the most important, low rate control information will be
-recorded during all the trace by lttd (i.e. process creation/exit). The high
-rate information (i.e. interrupt/traps/syscall entry/exit) will be kept in a
-flight recorder buffer (now named flight-channelname_X).
-<p>
-The following lttctl commands take an hybrid trace :
-<p>
-Create trace channel, start lttd on normal channels, start tracing:
-<PRE>
-lttctl -C -w /tmp/trace2 -o channel.kernel.overwrite=1 trace2
-</PRE>
-<p>
-Stop tracing, start lttd on flight recorder channels, destroy trace channels :
-<PRE>
-lttctl -D -w /tmp/trace2 trace2
-</PRE>
-<p>
-Each "overwrite" channel is flight recorder channel.
-
-
-<h3><a href="#TOCflight" name="flight">Tracing in flight recorder mode</a></h3>
-<li>Flight recorder mode</li>
-<p>
-The flight recorder mode writes data into overwritten buffers for all channels,
-including control channels, except for the facilities tracefiles. It consists of
-setting all channels to "overwrite".
-<p>
-The following lttctl commands take a flight recorder trace :
-<PRE>
-lttctl -C -w /tmp/trace3 -o channel.all.overwrite=1 trace3
-...
-lttctl -D -w /tmp/trace3 trace3
-</PRE>
-
-<hr />
-
-
-<h2><a href="#TOCsection3" name="section3">Adding new instrumentations with the
-markers</a></h2>
-<p>
-
-<h3><a href="#TOCkerneltp" name="kerneltp">Adding kernel
-instrumentation</a></h3>
-
-<p>
-See <a
-href="http://git.kernel.org/?p=linux/kernel/git/compudj/linux-2.6-lttng.git;a=blob;f=Documentation/markers.txt">Documentation/markers.txt</a>
-and <a
-href="http://git.kernel.org/?p=linux/kernel/git/compudj/linux-2.6-lttng.git;a=blob;f=Documentation/tracepoints.txt">Documentation/tracepoints.txt</a> in your kernel
-tree.
-<p>
-Also see <a
-href="http://git.kernel.org/?p=linux/kernel/git/compudj/linux-2.6-lttng.git;a=tree;f=ltt/probes">ltt/probes/</a>
-for LTTng probe examples.
-
-<h3><a href="#TOCusertp" name="usertp">Adding userspace instrumentation</a></h3>
-
-Add new events to userspace programs with
-<a href="http://ltt.polymtl.ca/packages/">userspace markers packages</a>.
-Get the latest markers-userspace-*.tar.bz2 and see the Makefile and examples. It
-allows inserting markers in executables and libraries, currently only on x86_32
-and x86_64.
-See <a
-href="http://ltt.polymtl.ca/packages/markers-userspace-0.5.tar.bz2">markers-userspace-0.5.tar.bz2</a> or more recent.
-
-<p>
-Note that a new design document for a 3rd generation of tracepoint/marker-based
-userspace tracing is available at <a
-href="http://ltt.polymtl.ca/svn/trunk/lttv/doc/developer/ust.html">LTTng User-space Tracing
-Design</a>. This new infrastructure is not yet implemented.
-
-<p>
-The easy quick-and-dirty way to perform userspace tracing is currently to write
-an string to /mnt/debugfs/ltt/write_event. See <a
-href="#userspacetracing">Userspace tracing</a> in the
-installation for sources section of this document.
-
-<hr />
-
-<h2><a href="#TOCsection4" name="section4">Creating Debian or RPM packages</a></h2>
-<p>
-
-<h3><a href="#TOCpkgdebian" name="pkgdebian">Create custom LTTV Debian packages</a></h3>
-
-<PRE>
-Use : dpkg-buildpackage -rfakeroot
-</PRE>
-<p>
-You should then have your LTTV .deb files created for your architecture.
-
-<h3><a href="#TOCpkglttng" name="pkglttng">Create custom LTTng packages</a></h3>
-<p>
-For building LTTng Debian packages :
-get the build tree with patches applies as explained in section 2.
-
-<PRE>
-make menuconfig (or xconfig or config) (customize your configuration)
-make-kpkg kernel_image
-</PRE>
-<p>
-You will then see your freshly created .deb in /usr/src. Install it with
-<PRE>
-dpkg -i /usr/src/(image-name).deb
-</PRE>
-<p>
-Then, follow the section "Editing the system wide configuration" in section 2.
-
-<hr />
-
- </body>
-</html>
projects / lttv.git / blobdiff