stream->endpoint_status = CONSUMER_ENDPOINT_ACTIVE;
stream->index_file = NULL;
stream->last_sequence_number = -1ULL;
+ stream->rotate_position = -1ULL;
pthread_mutex_init(&stream->lock, NULL);
pthread_mutex_init(&stream->metadata_timer_lock, NULL);
struct lttng_consumer_channel *channel,
struct lttng_trace_chunk *new_trace_chunk)
{
- int ret = 0;
- const bool is_local_trace = channel->relayd_id == -1ULL;
- bool update_stream_trace_chunk;
- struct cds_lfht_iter iter;
- struct lttng_consumer_stream *stream;
- unsigned long channel_hash;
-
pthread_mutex_lock(&channel->lock);
if (channel->is_deleted) {
/*
*/
goto end;
}
- /*
- * A stream can transition to a state where it and its channel
- * no longer belong to a trace chunk. For instance, this happens when
- * a session is rotated while it is inactive. After the rotation
- * of an inactive session completes, the channel and its streams no
- * longer belong to a trace chunk.
- *
- * However, if a session is stopped, rotated, and started again,
- * the session daemon will create a new chunk and send it to its peers.
- * In that case, the streams' transition to a new chunk can be performed
- * immediately.
- *
- * This trace chunk transition could also be performed lazily when
- * a buffer is consumed. However, creating the files here allows the
- * consumer daemon to report any creation error to the session daemon
- * and cause the start of the tracing session to fail.
- */
- update_stream_trace_chunk = !channel->trace_chunk && new_trace_chunk;
/*
* The acquisition of the reference cannot fail (barring
lttng_trace_chunk_put(channel->trace_chunk);
channel->trace_chunk = new_trace_chunk;
- if (!is_local_trace || !new_trace_chunk) {
- /* Not an error. */
- goto end;
- }
-
- if (!update_stream_trace_chunk) {
- goto end;
- }
-
- channel_hash = consumer_data.stream_per_chan_id_ht->hash_fct(
- &channel->key, lttng_ht_seed);
- rcu_read_lock();
- cds_lfht_for_each_entry_duplicate(consumer_data.stream_per_chan_id_ht->ht,
- channel_hash,
- consumer_data.stream_per_chan_id_ht->match_fct,
- &channel->key, &iter, stream, node_channel_id.node) {
- bool acquired_reference, should_regenerate_metadata = false;
-
- acquired_reference = lttng_trace_chunk_get(channel->trace_chunk);
- assert(acquired_reference);
-
- pthread_mutex_lock(&stream->lock);
-
- /*
- * On a transition from "no-chunk" to a new chunk, a metadata
- * stream's content must be entirely dumped. This must occcur
- * _after_ the creation of the metadata stream's output files
- * as the consumption thread (not necessarily the one executing
- * this) may start to consume during the call to
- * consumer_metadata_stream_dump().
- */
- should_regenerate_metadata =
- stream->metadata_flag &&
- !stream->trace_chunk && channel->trace_chunk;
- stream->trace_chunk = channel->trace_chunk;
- ret = consumer_stream_create_output_files(stream, true);
- if (ret) {
- pthread_mutex_unlock(&stream->lock);
- goto end_rcu_unlock;
- }
- if (should_regenerate_metadata) {
- ret = consumer_metadata_stream_dump(stream);
- }
- pthread_mutex_unlock(&stream->lock);
- if (ret) {
- goto end_rcu_unlock;
- }
- }
-end_rcu_unlock:
- rcu_read_unlock();
end:
pthread_mutex_unlock(&channel->lock);
- return ret;
+ return 0;
}
/*
*/
ssize_t lttng_consumer_on_read_subbuffer_mmap(
struct lttng_consumer_local_data *ctx,
- struct lttng_consumer_stream *stream, unsigned long len,
+ struct lttng_consumer_stream *stream,
+ const struct lttng_buffer_view *buffer,
unsigned long padding,
struct ctf_packet_index *index)
{
- unsigned long mmap_offset;
- void *mmap_base;
ssize_t ret = 0;
off_t orig_offset = stream->out_fd_offset;
/* Default is on the disk */
int outfd = stream->out_fd;
struct consumer_relayd_sock_pair *relayd = NULL;
unsigned int relayd_hang_up = 0;
+ const size_t subbuf_content_size = buffer->size - padding;
+ size_t write_len;
/* RCU lock for the relayd pointer */
rcu_read_lock();
}
}
- /* get the offset inside the fd to mmap */
- switch (consumer_data.type) {
- case LTTNG_CONSUMER_KERNEL:
- mmap_base = stream->mmap_base;
- ret = kernctl_get_mmap_read_offset(stream->wait_fd, &mmap_offset);
- if (ret < 0) {
- PERROR("tracer ctl get_mmap_read_offset");
- goto end;
- }
- break;
- case LTTNG_CONSUMER32_UST:
- case LTTNG_CONSUMER64_UST:
- mmap_base = lttng_ustctl_get_mmap_base(stream);
- if (!mmap_base) {
- ERR("read mmap get mmap base for stream %s", stream->name);
- ret = -EPERM;
- goto end;
- }
- ret = lttng_ustctl_get_mmap_read_offset(stream, &mmap_offset);
- if (ret != 0) {
- PERROR("tracer ctl get_mmap_read_offset");
- ret = -EINVAL;
- goto end;
- }
- break;
- default:
- ERR("Unknown consumer_data type");
- assert(0);
- }
-
/* Handle stream on the relayd if the output is on the network */
if (relayd) {
- unsigned long netlen = len;
+ unsigned long netlen = subbuf_content_size;
/*
* Lock the control socket for the complete duration of the function
goto write_error;
}
}
- } else {
- /* No streaming, we have to set the len with the full padding */
- len += padding;
+ write_len = subbuf_content_size;
+ } else {
+ /* No streaming; we have to write the full padding. */
if (stream->metadata_flag && stream->reset_metadata_flag) {
ret = utils_truncate_stream_file(stream->out_fd, 0);
if (ret < 0) {
* Check if we need to change the tracefile before writing the packet.
*/
if (stream->chan->tracefile_size > 0 &&
- (stream->tracefile_size_current + len) >
+ (stream->tracefile_size_current + buffer->size) >
stream->chan->tracefile_size) {
ret = consumer_stream_rotate_output_files(stream);
if (ret) {
outfd = stream->out_fd;
orig_offset = 0;
}
- stream->tracefile_size_current += len;
+ stream->tracefile_size_current += buffer->size;
if (index) {
index->offset = htobe64(stream->out_fd_offset);
}
+
+ write_len = buffer->size;
}
/*
* This call guarantee that len or less is returned. It's impossible to
* receive a ret value that is bigger than len.
*/
- ret = lttng_write(outfd, mmap_base + mmap_offset, len);
- DBG("Consumer mmap write() ret %zd (len %lu)", ret, len);
- if (ret < 0 || ((size_t) ret != len)) {
+ ret = lttng_write(outfd, buffer->data, write_len);
+ DBG("Consumer mmap write() ret %zd (len %lu)", ret, write_len);
+ if (ret < 0 || ((size_t) ret != write_len)) {
/*
* Report error to caller if nothing was written else at least send the
* amount written.
DBG("Consumer mmap write detected relayd hang up");
} else {
/* Unhandled error, print it and stop function right now. */
- PERROR("Error in write mmap (ret %zd != len %lu)", ret, len);
+ PERROR("Error in write mmap (ret %zd != write_len %zu)", ret,
+ write_len);
}
goto write_error;
}
/* This call is useless on a socket so better save a syscall. */
if (!relayd) {
/* This won't block, but will start writeout asynchronously */
- lttng_sync_file_range(outfd, stream->out_fd_offset, len,
+ lttng_sync_file_range(outfd, stream->out_fd_offset, write_len,
SYNC_FILE_RANGE_WRITE);
- stream->out_fd_offset += len;
+ stream->out_fd_offset += write_len;
lttng_consumer_sync_trace_file(stream, orig_offset);
}
switch (consumer_data.type) {
case LTTNG_CONSUMER_KERNEL:
- ret = kernctl_buffer_flush(stream->wait_fd);
- if (ret < 0) {
- ERR("Failed to flush kernel stream");
- goto end;
+ if (producer_active) {
+ ret = kernctl_buffer_flush(stream->wait_fd);
+ if (ret < 0) {
+ ERR("Failed to flush kernel stream");
+ goto end;
+ }
+ } else {
+ ret = kernctl_buffer_flush_empty(stream->wait_fd);
+ if (ret < 0) {
+ ERR("Failed to flush kernel stream");
+ goto end;
+ }
}
break;
case LTTNG_CONSUMER32_UST:
case LTTNG_CONSUMER64_UST:
- lttng_ustctl_flush_buffer(stream, producer_active);
+ lttng_ustconsumer_flush_buffer(stream, producer_active);
break;
default:
ERR("Unknown consumer_data type");
ht->hash_fct(&channel->key, lttng_ht_seed),
ht->match_fct, &channel->key, &iter.iter,
stream, node_channel_id.node) {
- unsigned long consumed_pos;
+ unsigned long produced_pos = 0, consumed_pos = 0;
health_code_update();
rotating_to_new_chunk = false;
}
- ret = lttng_consumer_sample_snapshot_positions(stream);
- if (ret < 0) {
- ERR("Failed to sample snapshot position during channel rotation");
- goto end_unlock_stream;
+ /*
+ * Do not flush an empty packet when rotating from a NULL trace
+ * chunk. The stream has no means to output data, and the prior
+ * rotation which rotated to NULL performed that side-effect already.
+ */
+ if (stream->trace_chunk) {
+ /*
+ * For metadata stream, do an active flush, which does not
+ * produce empty packets. For data streams, empty-flush;
+ * ensures we have at least one packet in each stream per trace
+ * chunk, even if no data was produced.
+ */
+ ret = consumer_flush_buffer(stream, stream->metadata_flag ? 1 : 0);
+ if (ret < 0) {
+ ERR("Failed to flush stream %" PRIu64 " during channel rotation",
+ stream->key);
+ goto end_unlock_stream;
+ }
}
- ret = lttng_consumer_get_produced_snapshot(stream,
- &stream->rotate_position);
- if (ret < 0) {
- ERR("Failed to sample produced position during channel rotation");
+ ret = lttng_consumer_take_snapshot(stream);
+ if (ret < 0 && ret != -ENODATA && ret != -EAGAIN) {
+ ERR("Failed to sample snapshot position during channel rotation");
goto end_unlock_stream;
}
+ if (!ret) {
+ ret = lttng_consumer_get_produced_snapshot(stream,
+ &produced_pos);
+ if (ret < 0) {
+ ERR("Failed to sample produced position during channel rotation");
+ goto end_unlock_stream;
+ }
- lttng_consumer_get_consumed_snapshot(stream,
- &consumed_pos);
- if (consumed_pos == stream->rotate_position) {
+ ret = lttng_consumer_get_consumed_snapshot(stream,
+ &consumed_pos);
+ if (ret < 0) {
+ ERR("Failed to sample consumed position during channel rotation");
+ goto end_unlock_stream;
+ }
+ }
+ /*
+ * Align produced position on the start-of-packet boundary of the first
+ * packet going into the next trace chunk.
+ */
+ produced_pos = ALIGN_FLOOR(produced_pos, stream->max_sb_size);
+ if (consumed_pos == produced_pos) {
stream->rotate_ready = true;
}
-
/*
- * Active flush; has no effect if the production position
- * is at a packet boundary.
+ * The rotation position is based on the packet_seq_num of the
+ * packet following the last packet that was consumed for this
+ * stream, incremented by the offset between produced and
+ * consumed positions. This rotation position is a lower bound
+ * (inclusive) at which the next trace chunk starts. Since it
+ * is a lower bound, it is OK if the packet_seq_num does not
+ * correspond exactly to the same packet identified by the
+ * consumed_pos, which can happen in overwrite mode.
*/
- ret = consumer_flush_buffer(stream, 1);
- if (ret < 0) {
- ERR("Failed to flush stream %" PRIu64 " during channel rotation",
+ if (stream->sequence_number_unavailable) {
+ /*
+ * Rotation should never be performed on a session which
+ * interacts with a pre-2.8 lttng-modules, which does
+ * not implement packet sequence number.
+ */
+ ERR("Failure to rotate stream %" PRIu64 ": sequence number unavailable",
stream->key);
+ ret = -1;
goto end_unlock_stream;
}
+ stream->rotate_position = stream->last_sequence_number + 1 +
+ ((produced_pos - consumed_pos) / stream->max_sb_size);
if (!is_local_trace) {
/*
* The relay daemon control protocol expects a rotation
* position as "the sequence number of the first packet
- * _after_ the current trace chunk.
- *
- * At the moment when the positions of the buffers are
- * sampled, the production position does not necessarily
- * sit at a packet boundary. The 'active' flush
- * operation above will push the production position to
- * the next packet boundary _if_ it is not already
- * sitting at such a boundary.
- *
- * Assuming a current production position that is not
- * on the bound of a packet, the 'target' sequence
- * number is
- * (consumed_pos / subbuffer_size) + 1
- * Note the '+ 1' to ensure the current packet is
- * part of the current trace chunk.
- *
- * However, if the production position is already at
- * a packet boundary, the '+ 1' is not necessary as the
- * last packet of the current chunk is already
- * 'complete'.
+ * _after_ the current trace chunk".
*/
const struct relayd_stream_rotation_position position = {
.stream_id = stream->relayd_stream_id,
- .rotate_at_seq_num = (stream->rotate_position / stream->max_sb_size) +
- !!(stream->rotate_position % stream->max_sb_size),
+ .rotate_at_seq_num = stream->rotate_position,
};
ret = lttng_dynamic_array_add_element(
*/
int lttng_consumer_stream_is_rotate_ready(struct lttng_consumer_stream *stream)
{
- int ret;
- unsigned long consumed_pos;
-
- if (!stream->rotate_position && !stream->rotate_ready) {
- ret = 0;
- goto end;
- }
-
if (stream->rotate_ready) {
- ret = 1;
- goto end;
+ return 1;
}
/*
- * If we don't have the rotate_ready flag, check the consumed position
- * to determine if we need to rotate.
+ * If packet seq num is unavailable, it means we are interacting
+ * with a pre-2.8 lttng-modules which does not implement the
+ * sequence number. Rotation should never be used by sessiond in this
+ * scenario.
*/
- ret = lttng_consumer_sample_snapshot_positions(stream);
- if (ret < 0) {
- ERR("Taking snapshot positions");
- goto end;
+ if (stream->sequence_number_unavailable) {
+ ERR("Internal error: rotation used on stream %" PRIu64
+ " with unavailable sequence number",
+ stream->key);
+ return -1;
}
- ret = lttng_consumer_get_consumed_snapshot(stream, &consumed_pos);
- if (ret < 0) {
- ERR("Consumed snapshot position");
- goto end;
+ if (stream->rotate_position == -1ULL ||
+ stream->last_sequence_number == -1ULL) {
+ return 0;
}
- /* Rotate position not reached yet (with check for overflow). */
- if ((long) (consumed_pos - stream->rotate_position) < 0) {
- ret = 0;
- goto end;
+ /*
+ * Rotate position not reached yet. The stream rotate position is
+ * the position of the next packet belonging to the next trace chunk,
+ * but consumerd considers rotation ready when reaching the last
+ * packet of the current chunk, hence the "rotate_position - 1".
+ */
+ if (stream->last_sequence_number >= stream->rotate_position - 1) {
+ return 1;
}
- ret = 1;
-end:
- return ret;
+ return 0;
}
/*
*/
void lttng_consumer_reset_stream_rotate_state(struct lttng_consumer_stream *stream)
{
- stream->rotate_position = 0;
+ stream->rotate_position = -1ULL;
stream->rotate_ready = false;
}
{
int ret;
enum lttcomm_return_code ret_code = LTTCOMM_CONSUMERD_SUCCESS;
- struct lttng_trace_chunk *created_chunk, *published_chunk;
+ struct lttng_trace_chunk *created_chunk = NULL, *published_chunk = NULL;
enum lttng_trace_chunk_status chunk_status;
char relayd_id_buffer[MAX_INT_DEC_LEN(*relayd_id)];
char creation_timestamp_buffer[ISO8601_STR_LEN];
if (!created_chunk) {
ERR("Failed to create trace chunk");
ret_code = LTTCOMM_CONSUMERD_CREATE_TRACE_CHUNK_FAILED;
- goto end;
+ goto error;
}
if (chunk_override_name) {
chunk_override_name);
if (chunk_status != LTTNG_TRACE_CHUNK_STATUS_OK) {
ret_code = LTTCOMM_CONSUMERD_CREATE_TRACE_CHUNK_FAILED;
- goto end;
+ goto error;
}
}
if (chunk_status != LTTNG_TRACE_CHUNK_STATUS_OK) {
ERR("Failed to set trace chunk credentials");
ret_code = LTTCOMM_CONSUMERD_CREATE_TRACE_CHUNK_FAILED;
- goto end;
+ goto error;
}
/*
* The consumer daemon has no ownership of the chunk output
if (chunk_status != LTTNG_TRACE_CHUNK_STATUS_OK) {
ERR("Failed to set trace chunk's directory handle");
ret_code = LTTCOMM_CONSUMERD_CREATE_TRACE_CHUNK_FAILED;
- goto end;
+ goto error;
}
}
if (!published_chunk) {
ERR("Failed to publish trace chunk");
ret_code = LTTCOMM_CONSUMERD_CREATE_TRACE_CHUNK_FAILED;
- goto end;
+ goto error;
}
rcu_read_lock();
}
ret_code = LTTCOMM_CONSUMERD_CREATE_TRACE_CHUNK_FAILED;
- goto error;
+ goto error_unlock;
}
}
-error:
+error_unlock:
rcu_read_unlock();
+error:
/* Release the reference returned by the "publish" operation. */
lttng_trace_chunk_put(published_chunk);
lttng_trace_chunk_put(created_chunk);
-end:
return ret_code;
}
{
int ret;
enum lttcomm_return_code ret_code;
- struct lttng_trace_chunk *chunk;
char relayd_id_buffer[MAX_INT_DEC_LEN(*relayd_id)];
const char *relayd_id_str = "(none)";
const bool is_local_trace = !relayd_id;
struct consumer_relayd_sock_pair *relayd = NULL;
- bool chunk_exists_remote;
+ bool chunk_exists_local, chunk_exists_remote;
if (relayd_id) {
int ret;
DBG("Consumer trace chunk exists command: relayd_id = %s"
", chunk_id = %" PRIu64, relayd_id_str,
chunk_id);
- chunk = lttng_trace_chunk_registry_find_chunk(
+ ret = lttng_trace_chunk_registry_chunk_exists(
consumer_data.chunk_registry, session_id,
- chunk_id);
- DBG("Trace chunk %s locally", chunk ? "exists" : "does not exist");
- if (chunk) {
+ chunk_id, &chunk_exists_local);
+ if (ret) {
+ /* Internal error. */
+ ERR("Failed to query the existence of a trace chunk");
+ ret_code = LTTCOMM_CONSUMERD_FATAL;
+ goto end;
+ }
+ DBG("Trace chunk %s locally",
+ chunk_exists_local ? "exists" : "does not exist");
+ if (chunk_exists_local) {
ret_code = LTTCOMM_CONSUMERD_TRACE_CHUNK_EXISTS_LOCAL;
- lttng_trace_chunk_put(chunk);
goto end;
} else if (is_local_trace) {
ret_code = LTTCOMM_CONSUMERD_UNKNOWN_TRACE_CHUNK;