#!/bin/bash
#
-# Copyright (C) 2015 Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
-# Copyright (C) 2016-2020 Michael Jeanson <mjeanson@efficios.com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program. If not, see <http://www.gnu.org/licenses/>.
+# SPDX-FileCopyrightText: 2015 Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
+# SPDX-FileCopyrightText: 2016-2023 Michael Jeanson <mjeanson@efficios.com>
+# SPDX-License-Identifier: GPL-2.0-or-later
set -exu
[ "$res" -ne "0" ]
}
+print_header() {
+ set +x
+
+ local message=" $1 "
+ local message_len
+ local padding_len
+
+ message_len="${#message}"
+ padding_len=$(( (80 - (message_len)) / 2 ))
+
+ printf '\n'; printf -- '#%.0s' {1..80}; printf '\n'
+ printf -- '-%.0s' {1..80}; printf '\n'
+ printf -- '#%.0s' $(seq 1 $padding_len); printf '%s' "$message"; printf -- '#%.0s' $(seq 1 $padding_len); printf '\n'
+ printf -- '-%.0s' {1..80}; printf '\n'
+ printf -- '#%.0s' {1..80}; printf '\n\n'
+
+ set -x
+}
+
failed_configure() {
# Assume we are in the configured build directory
- echo "#################### BEGIN config.log ####################"
+ print_header "BEGIN config.log"
cat config.log
- echo "#################### END config.log ####################"
+ print_header "END config.log"
exit 1
}
+print_header "Babeltrace build script starting"
# Required variables
WORKSPACE=${WORKSPACE:-}
+# Axis
platform=${platform:-}
conf=${conf:-}
build=${build:-}
cc=${cc:-}
-# Controls if the tests are run
-BABELTRACE_RUN_TESTS="${BABELTRACE_RUN_TESTS:=yes}"
+# Build steps that can be overriden by the environment
+BABELTRACE_MAKE_INSTALL="${BABELTRACE_MAKE_INSTALL:-yes}"
+BABELTRACE_MAKE_CLEAN="${BABELTRACE_MAKE_CLEAN:-yes}"
+BABELTRACE_GEN_COMPILE_COMMANDS="${BABELTRACE_GEN_COMPILE_COMMANDS:-no}"
+BABELTRACE_RUN_TESTS="${BABELTRACE_RUN_TESTS:-yes}"
+BABELTRACE_CLANG_TIDY="${BABELTRACE_CLANG_TIDY:-no}"
SRCDIR="$WORKSPACE/src/babeltrace"
TMPDIR="$WORKSPACE/tmp"
fi
fi
+exit_status=0
+
+# Use bear to generate compile_commands.json when enabled
+BEAR=""
+if [ "$BABELTRACE_GEN_COMPILE_COMMANDS" = "yes" ]; then
+ BEAR="bear"
+fi
+
# Create tmp directory
rm -rf "$TMPDIR"
mkdir -p "$TMPDIR"
export TMPDIR
export CFLAGS="-g -O2"
+export CXXFLAGS="-g -O2"
# Set compiler variables
case "$cc" in
;;
*)
if [ "x$cc" != "x" ]; then
- export CC="$cc"
+ echo ""
+ exit 1
fi
;;
esac
-if [ "x${CC:-}" != "x" ]; then
- echo "Selected compiler:"
- "$CC" -v
-fi
-
# Set platform variables
case "$platform" in
macos*)
esac
# Print build env details
+print_header "Build environment details"
print_os || true
print_tooling || true
cd "$SRCDIR"
# Run bootstrap in the source directory prior to configure
+print_header "Bootstrap autotools"
./bootstrap
# Get source version from configure script
# Set configure options and environment variables for each build
# configuration.
-CONF_OPTS=("--prefix=$PREFIX" "--libdir=$PREFIX/$LIBDIR_ARCH")
+CONF_OPTS=("--prefix=$PREFIX" "--libdir=$PREFIX/$LIBDIR_ARCH" "--disable-maintainer-mode")
# -Werror is enabled by default in stable-2.0 but won't be in 2.1
# Explicitly disable it for consistency.
if vergte "$PACKAGE_VERSION" "2.0"; then
- CONF_OPTS+=("--disable-Werror")
+ CONF_OPTS+=("--disable-Werror")
fi
case "$conf" in
static)
- echo "Static lib only configuration"
+ print_header "Conf: Static lib only"
CONF_OPTS+=("--enable-static" "--disable-shared")
;;
python-bindings)
- echo "Python bindings configuration"
+ print_header "Conf: Python bindings"
CONF_OPTS+=("--enable-python-bindings")
;;
prod)
- echo "Production configuration"
+ print_header "Conf: Production"
# Unset the developper variables
unset BABELTRACE_DEBUG_MODE
;;
doc)
- echo "Documentation configuration"
+ print_header "Conf: Documentation"
CONF_OPTS+=("--enable-python-bindings" "--enable-python-bindings-doc" "--enable-python-plugins" "--enable-api-doc")
;;
asan)
- echo "Address Sanitizer configuration"
+ print_header "Conf: Address Sanitizer"
# --enable-asan was introduced after 2.0 but don't check the version, we
# want this configuration to fail if ASAN is unavailable.
;;
min)
- echo "Minimal configuration"
+ print_header "Conf: Minimal"
;;
*)
- echo "Standard configuration"
+ print_header "Conf: Standard"
# Enable the python bindings / plugins by default with babeltrace2,
# the test suite is mostly useless without it.
# before continuing.
case "$build" in
oot)
- echo "Out of tree build"
+ print_header "Build: Out of tree"
# Create and enter a temporary build directory
builddir=$(mktemp -d)
;;
dist)
- echo "Distribution in-tree build"
+ print_header "Build: Distribution In-tree"
# Run configure and generate the tar file
# in the source directory
;;
oot-dist)
- echo "Distribution out of tree build"
+ print_header "Build: Distribution Out of tree"
# Create and enter a temporary build directory
builddir=$(mktemp -d)
;;
*)
- echo "Standard in-tree build"
+ print_header "Build: Standard In-tree"
./configure "${CONF_OPTS[@]}" || failed_configure
;;
esac
# We are now inside a configured build directory
# BUILD!
-$MAKE -j "$($NPROC)" V=1
+print_header "BUILD!"
+$BEAR ${BEAR:+--} $MAKE -j "$($NPROC)" V=1
+
+# Install in the workspace if enabled
+if [ "$BABELTRACE_MAKE_INSTALL" = "yes" ]; then
+ print_header "Install"
+
+ $MAKE install V=1 DESTDIR="$WORKSPACE"
+
+ # Cleanup rpath in executables and shared libraries
+ find "$WORKSPACE/$PREFIX/bin" -type f -perm -0500 -exec chrpath --delete {} \;
+ find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.so" -exec chrpath --delete {} \;
+
+ # Remove libtool .la files
+ find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.la" -delete
+fi
+
+# Run clang-tidy on the topmost commit
+if [ "$BABELTRACE_CLANG_TIDY" = "yes" ]; then
+ print_header "Run clang-tidy"
-# Install in the workspace
-$MAKE install DESTDIR="$WORKSPACE"
+ # This would be better by linting only the lines touched by a patch but it
+ # doesn't seem to work, the lines are always filtered and no error is
+ # reported.
+ #git diff -U0 HEAD^ | clang-tidy-diff -p1 -j "$($NPROC)" -timeout 60 -fix
-# Run tests, don't fail now, we want to run the archiving steps
-failed_tests=0
+ # Instead, run clan-tidy on all the files touched by the patch.
+ while read -r filepath; do
+ if [[ "$filepath" =~ (\.cpp|\.hhp|\.c|\.h)$ ]]; then
+ clang-tidy --fix-errors "$(realpath "$filepath")"
+ fi
+ done < <(git diff-tree --no-commit-id --diff-filter=d --name-only -r HEAD)
+
+ # If the tree has local changes, the formatting was incorrect
+ GIT_DIFF_OUTPUT=$(git diff)
+ if [ -n "$GIT_DIFF_OUTPUT" ]; then
+ echo "Saving clang-tidy proposed fixes in clang-tidy-fixes.diff"
+ git diff > "$WORKSPACE/clang-tidy-fixes.diff"
+
+ # Restore the unfixed files so they can be viewed in the warnings web
+ # interface
+ git checkout .
+ exit_status=1
+ fi
+fi
+
+# Run tests if enabled
if [ "$BABELTRACE_RUN_TESTS" = "yes" ]; then
- $MAKE --keep-going check || failed_tests=1
+ print_header "Run test suite"
- # Copy tap logs for the jenkins tap parser before cleaning the build dir
- rsync -a --exclude 'test-suite.log' --include '*/' --include '*.log' --exclude='*' tests/ "$WORKSPACE/tap"
+ # Run tests, don't fail now, we want to run the archiving steps
+ $MAKE --keep-going check || exit_status=1
- # Copy the test suites top-level log which includes all tests failures
- rsync -a --include 'test-suite.log' --include '*/' --exclude='*' tests/ "$WORKSPACE/log"
+ # Copy tap logs for the jenkins tap parser before cleaning the build dir
+ rsync -a --exclude 'test-suite.log' --include '*/' --include '*.log' --exclude='*' tests/ "$WORKSPACE/tap"
- # The test suite prior to 1.5 did not produce TAP logs
- if verlt "$PACKAGE_VERSION" "1.5"; then
- mkdir -p "$WORKSPACE/tap/no-log"
- echo "1..1" > "$WORKSPACE/tap/no-log/tests.log"
- echo "ok 1 - Test suite doesn't support logging" >> "$WORKSPACE/tap/no-log/tests.log"
- fi
+ # Copy the test suites top-level log which includes all tests failures
+ rsync -a --include 'test-suite.log' --include '*/' --exclude='*' tests/ "$WORKSPACE/log"
fi
# Clean the build directory
-$MAKE clean
-
-# Cleanup rpath in executables and shared libraries
-find "$WORKSPACE/$PREFIX/bin" -type f -perm -0500 -exec chrpath --delete {} \;
-find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.so" -exec chrpath --delete {} \;
+if [ "$BABELTRACE_MAKE_CLEAN" = "yes" ]; then
+ print_header "Clean"
+ $MAKE clean
+fi
-# Remove libtool .la files
-find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.la" -exec rm -f {} \;
+print_header "Babeltrace build script ended with: $(test $exit_status == 0 && echo SUCCESS || echo FAILURE)"
# Exit with failure if any of the tests failed
-exit $failed_tests
+exit $exit_status
# EOF
+# vim: expandtab tabstop=4 shiftwidth=4
projects / lttng-ci.git / blobdiff