binary packages and use it. If there are no packages ready for your system, you
will have to install from sources (section 2) instead.
-These operations are made for installing LTTng 0.3 on a linux 2.6.12-rc2-mm2
-kernel. Change the versions to fit your needs.
+These operations are made for installing the LTTng 0.4.3 tracer on a
+linux 2.6.12-rc4-mm2 kernel. You will also find instructions for installtion of
+LTTV 0.6.x : the Linux Trace Toolkit Viewer.
+
+At this point, the -mm tree of the kernel is used because it has RelayFS support
+in it. In a nearby future, a vanilla kernel 2.6.14 will be used, as RelayFS has
+been integrated in the linux 2.6.14-rc series.
+
+The following lttng patch is necessary to have the tracing hooks in the kernel.
+The following ltt-control module controls the tracing.
+
+Required programs and librairies are assumed to be automatically installed in an
+installation with Debian or RPM packages. In the case of an installation from
+sources, the dependencies are listed.
+
+
+** Current development status **
+
+LTTng :
+supported architectures :
+Intel Pentium (UP/SMP) with TSC
+
+LTTV :
+supported architectures :
+Intel i386 and better
+PowerPC
+
+
Author : Mathieu Desnoyers, September 2005
** Section 1 * Installation from Debian or RPM packages **
***********************************************************
-No Debian or RPM packages are ready yet.
+* Install from RPM packages on Fedora Core 4 :
+
+Get LTTV RPM from :
+
+http://ltt.polymtl.ca/packages/fedora/RPMS
+
+LTTV RPM are ready.
+
+LTTng kernel and lttng-modules RPM are available for some architectures (i586,
+i686). Feel free to help fix the spec files to have correct lttng-modules RPM
+package.
+
+
+* Install from Deb packages on Debian :
-TODO
+You can use the ltt.polymtl.ca apt source to get LTTV for Debian :
+
+Add the following two sources to your /etc/apt/sources.list :
+
+deb http://ltt.polymtl.ca/packages/debian experimental main
+deb-src http://ltt.polymtl.ca/packages/debian experimental main
+
+
+* Install from precompiled binary packages (LTTV compiled only for i386, and
+ LTTng only for i686 smp), perform the following :
+
+su -
+apt-get update
+apt-get install lttv lttv-doc
+apt-get install kernel-image-2.6.12-rc4-mm2-lttng-0.4.2
+apt-get install lttng-modules-modules-2.6.12-rc4-mm2-lttng-0.4.2
+ * note : the packages are signed by myself. I am not considered a trusted
+ Debian source yet, so warnings are normal.
+
+Then, follow the section "Editing the system wide configuration" in section 2.
+
+* Create custom LTTV Debian packages
+
+Binary packages are only available for i386. If you want to create your own LTTV
+packages for other platforms, do :
+
+su -
+cd /usr/src
+apt-get source lttv
+cd lttv-0.6.9
+dpkg-buildpackage -rfakeroot
+
+You should then have your LTTV .deb files created for your architecture.
+
+* Create custom LTTng packages
+
+For building LTTng Debian packages :
+
+su -
+apt-get install kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
+cd /usr/src
+bzip2 -cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2.tar.bz2 | tar xvof -
+cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
+make menuconfig (or xconfig or config) (customize your configuration)
+make-kpkg kernel_image
+
+You will then see your freshly created .deb in /usr/src. Install it with
+dpkg -i /usr/src/(image-name).deb
+
+You will also need to create a package for the lttng-modules :
+
+su -
+cd /usr/src
+apt-get source lttng-modules
+cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
+make-kpkg --added_modules /usr/src/lttng-modules-0.3 modules_image
+
+You will then see your freshly created .deb in /usr/src. Install it with
+dpkg -i /usr/src/lttng-modules-modules-(your version).deb
+
+
+Then, follow the section "Editing the system wide configuration" in section 2.
***********************************************************
** Section 2 * Installation from sources **
***********************************************************
+* Prerequisites
+
+Tools needed to follow the package download steps :
+
+o wget
+o bzip2
+o gzip
+o tar
+
+You have to install the standard development librairies and programs necessary
+to compile a kernel :
+
+(from Documentation/Changes in the Linux kernel tree)
+o Gnu C 2.95.3 # gcc --version
+o Gnu make 3.79.1 # make --version
+o binutils 2.12 # ld -v
+o util-linux 2.10o # fdformat --version
+o module-init-tools 0.9.10 # depmod -V
+
+You might also want to have libncurses5 to have the text mode kernel
+configuration menu, but there are alternatives.
+
+Prerequisites for LTTV 0.6.x installation are :
+
+gcc 3.2 or better
+gtk 2.4 or better development libraries
+ (Debian : libgtk2.0, libgtk2.0-dev)
+ (Fedora : gtk2, gtk2-devel)
+ note : For Fedora users : this might require at least core 3 from Fedora,
+ or you might have to compile your own GTK2 library.
+glib 2.4 or better development libraries
+ (Debian : libglib2.0-0, libglib2.0-dev)
+ (Fedora : glib2, glib2-devel)
+libpopt development libraries
+ (Debian : libpopt0, libpopt-dev)
+ (Fedora : popt)
+libpango development libraries
+ (Debian : libpango1.0, libpango1.0-dev)
+ (Fedora : pango, pango-devel)
+libc6 development librairies
+ (Debian : libc6, libc6-dev)
+ (Fedora : glibc, glibc)
+
+
* Getting the LTTng packages
su -
mkdir /usr/src/lttng
cd /usr/src/lttng
(see http://ltt.polymtl.ca/lttng for package listing)
-wget http://ltt.polymtl.ca/lttng/lttng-modules-0.2.tar.bz2
-wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2
-bzip2 -cd lttng-modules-0.2.tar.bz2 | tar xvof -
+wget http://ltt.polymtl.ca/lttng/lttng-modules-0.3.tar.bz2
+wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.3.tar.bz2
+bzip2 -cd lttng-modules-0.3.tar.bz2 | tar xvof -
+bzip2 -cd patch-2.6.12-rc4-mm2-lttng-0.4.3.tar.bz2 | tar xvof -
* Getting LTTng kernel sources
bzip2 -cd linux-2.6.12-rc4.tar.bz2 | tar xvof -
cd linux-2.6.12-rc4
bzip2 -cd ../2.6.12-rc4-mm2.bz2 | patch -p1
-bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2 | patch -p1
+cat /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.4.3-* | patch -p1
cd ..
-mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.3
+mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.4.3
* Installing a LTTng kernel
su -
-cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3
-make menuconfig
- General setup
- * Linux Trace Toolkit Instrumentation Support
- M or * Linux Trace Toolkit Tracer
+cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3
+make menuconfig (or make xconfig or make config)
+ Select the < Help > button if you are not familiar with kernel
+ configuration.
+ Items preceded by [*] means they has to be built into the kernel.
+ Items preceded by [M] means they has to be built as modules.
+ Items preceded by [ ] means they should be removed.
+ go to the "General setup" section
+ Select the following options :
+ [*] Linux Trace Toolkit Instrumentation Support
+ [M] or [*] Linux Trace Toolkit Tracer
+ It makes no difference for the rest of the procedure whether the Tracer
+ is compiled built-in or as a module.
do NOT activate (not ready yet) :
- Align Linux Trace Toolkit Traces
- Activate Linux Trace Toolkit Heartbeat Timer
+ [ ] Align Linux Trace Toolkit Traces
+ [ ] Activate Linux Trace Toolkit Heartbeat Timer
IMPORTANT : This is enabled by default : you must disable it!
+ Select <Exit>
+ Select <Exit>
+ Select <Yes>
make
-make install
make modules_install
-
-The first time you use relayfs, you have to specify a mount point in you system:
-mkdir /mnt/relayfs
-echo "relayfs /mnt/relayfs relayfs rw 0 0" \
- >> /etc/fstab
-
-Depending on your boot loader, you may want to execute :
-update-grub or lilo
+make install
reboot
+ Select the Linux 2.6.12-rc4-mm2-lttng-0.4.3 kernel in your boot loader.
+
* Install the ltt-modules
su -
-cd /usr/src/lttng/lttng-modules-0.2
-KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make
-KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make modules_install
+cd /usr/src/lttng/lttng-modules-0.3
+KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3 make
+KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3 make modules_install
+
+
+* Editing the system wide configuration
+
+You must activate relayfs and specify a mount point. This is typically done in
+fstab such that it happens at boot time.
+
+If you have never used RelayFS before, these operation would do this for you :
+
+mkdir /mnt/relayfs
+cp /etc/fstab /etc/fstab.lttng.bkp
+echo "relayfs /mnt/relayfs relayfs rw 0 0" >> /etc/fstab
+
+then, rebooting or issuing the following command will activate relayfs :
+
+mount /mnt/relayfs
+
+You need to load the ltt-control module to be able to control tracing from user
+space. This is done by issuing the command :
-note : at this stage, you might want to execute
modprobe ltt-control
-and you might also want to do this :
+You can automate at boot time loading the ltt-control module by :
+
echo ltt-control >> /etc/modules
su -
cd /usr/src
-wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.2-20092005.tar.gz
-gzip -cd LinuxTraceToolkitViewer-0.6.2-20092005.tar.gz | tar xvof -
-cd LinuxTraceToolkitViewer-0.6.2-20092005
+wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.9-10102005.tar.gz
+gzip -cd LinuxTraceToolkitViewer-0.6.9-10102005.tar.gz | tar xvof -
+cd LinuxTraceToolkitViewer-0.6.9-10102005
(refer to README to see the development libraries that must be installed on you
system)
./configure
Start tracing :
-lttctl -n trace -d -l /mnt/relayfs/ltt -t /tmp/trace1
+lttctl -n trace -d -l /mnt/relayfs/ltt -t /tmp/trace
Stop tracing and destroy trace channels :
su -
cd /usr/src
-wget http://ltt.polymtl.ca/packages/genevent-0.1.tar.gz
-gzip -cd genevent-0.1.tar.gz | tar xvof -
-cd genevent-0.1
+wget http://ltt.polymtl.ca/packages/genevent-0.2.tar.gz
+gzip -cd genevent-0.2.tar.gz | tar xvof -
+cd genevent-0.2
make
make install
cp process.xml yourfacility.xml
* edit yourfacility.xml to fit your needs.
cd /tmp
-/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/yourfacility.xml
+/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/facilities/yourfacility.xml
cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3/include/linux/ltt
cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/ltt
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3/ltt
* edit the kernel file you want to instrument
- Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
of the file.
- Add a call to the tracing functions. See their names and parameters in
- /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt/ltt-facility-yourfacility.h
+ /usr/src/linux-2.6.12-rc4-mm2-lttng-0.4.3/include/linux/ltt/ltt-facility-yourfacility.h
projects / lttv.git / blobdiff