The LTTng Documentation
=======================
Philippe Proulx <pproulx@efficios.com>
-v2.10, 1 August 2017
+v2.10, 25 February 2021
include::../common/copyright.txt[]
+include::../common/warning-not-maintained.txt[]
+
+
include::../common/welcome.txt[]
[[installing-lttng]]
== Installation
+include::../common/warning-no-installation.txt[]
+
**LTTng** is a set of software <<plumbing,components>> which interact to
<<instrumenting,instrument>> the Linux kernel and user applications, and
to <<controlling-tracing,control tracing>> (start and stop
trace user applications.
Most distributions mark the LTTng-modules and LTTng-UST packages as
-optional when installing LTTng-tools (which is always required). In the
-following sections, we always provide the steps to install all three,
-but note that:
+optional when installing LTTng-tools (which is always required). Note
+that:
* You only need to install LTTng-modules if you intend to trace the
Linux kernel.
* You only need to install LTTng-UST if you intend to trace user
applications.
-[role="growable"]
-.Availability of LTTng{nbsp}{revision} for major Linux distributions as of 25 July 2017.
-|====
-|Distribution |Available in releases |Alternatives
-
-|https://www.ubuntu.com/[Ubuntu]
-|Ubuntu{nbsp}14.04 _Trusty Tahr_ and Ubuntu{nbsp}16.04 _Xenial Xerus_:
-<<ubuntu-ppa,use the LTTng Stable{nbsp}{revision} PPA>>.
-|link:/docs/v2.9#doc-ubuntu[LTTng{nbsp}2.9 for Ubuntu{nbsp}17.04 _Zesty Zapus_].
-
-<<building-from-source,Build LTTng{nbsp}{revision} from source>> for
-other Ubuntu releases.
-
-|https://getfedora.org/[Fedora]
-|_Not available_
-|link:/docs/v2.9#doc-fedora[LTTng{nbsp}2.9 for Fedora 26].
-
-<<building-from-source,Build LTTng{nbsp}{revision} from source>>.
-
-|https://www.debian.org/[Debian]
-|_Not available_
-|link:/docs/v2.9#doc-debian[LTTng{nbsp}2.9 for Debian "stretch"
-(stable), Debian "buster" (testing), and Debian "sid" (unstable)].
-
-<<building-from-source,Build LTTng{nbsp}{revision} from source>>.
-
-|https://www.archlinux.org/[Arch Linux]
-|_Not available_
-|link:/docs/v2.9#doc-arch-linux[LTTng{nbsp}2.9 in the latest AUR packages].
-
-|https://alpinelinux.org/[Alpine Linux]
-|_Not available_
-|link:/docs/v2.9#doc-alpine-linux[LTTng{nbsp}2.9 for Alpine Linux "edge"].
-
-<<building-from-source,Build LTTng{nbsp}{revision} from source>>.
-
-|https://www.redhat.com/[RHEL] and https://www.suse.com/[SLES]
-|See http://packages.efficios.com/[EfficiOS Enterprise Packages].
-|
-
-|https://buildroot.org/[Buildroot]
-|_Not available_
-|link:/docs/v2.9#doc-buildroot[LTTng{nbsp}2.9 for Buildroot{nbsp}2017.02 and
-Buildroot{nbsp}2017.05].
-
-<<building-from-source,Build LTTng{nbsp}{revision} from source>>.
-
-|http://www.openembedded.org/wiki/Main_Page[OpenEmbedded] and
-https://www.yoctoproject.org/[Yocto]
-|_Not available_
-|link:/docs/v2.9#doc-oe-yocto[LTTng{nbsp}2.9 for Yocto Project{nbsp}2.3 _Pyro_]
-(`openembedded-core` layer).
-
-<<building-from-source,Build LTTng{nbsp}{revision} from source>>.
-|====
-
-
-[[ubuntu]]
-=== [[ubuntu-official-repositories]]Ubuntu
-
-[[ubuntu-ppa]]
-==== noch:{LTTng} Stable {revision} PPA
-
-The https://launchpad.net/~lttng/+archive/ubuntu/stable-{revision}[LTTng
-Stable{nbsp}{revision} PPA] offers the latest stable
-LTTng{nbsp}{revision} packages for:
-
-* Ubuntu{nbsp}14.04 _Trusty Tahr_
-* Ubuntu{nbsp}16.04 _Xenial Xerus_
-
-To install LTTng{nbsp}{revision} from the LTTng Stable{nbsp}{revision} PPA:
-
-. Add the LTTng Stable{nbsp}{revision} PPA repository and update the
- list of packages:
-+
---
-[role="term"]
-----
-# apt-add-repository ppa:lttng/stable-2.10
-# apt-get update
-----
---
-
-. Install the main LTTng{nbsp}{revision} packages:
-+
---
-[role="term"]
-----
-# apt-get install lttng-tools
-# apt-get install lttng-modules-dkms
-# apt-get install liblttng-ust-dev
-----
---
-
-. **If you need to instrument and trace
- <<java-application,Java applications>>**, install the LTTng-UST
- Java agent:
-+
---
-[role="term"]
-----
-# apt-get install liblttng-ust-agent-java
-----
---
-
-. **If you need to instrument and trace
- <<python-application,Python{nbsp}3 applications>>**, install the
- LTTng-UST Python agent:
-+
---
-[role="term"]
-----
-# apt-get install python3-lttngust
-----
---
-
-
-[[enterprise-distributions]]
-=== RHEL, SUSE, and other enterprise distributions
-
-To install LTTng on enterprise Linux distributions, such as Red Hat
-Enterprise Linux (RHEL) and SUSE Linux Enterprise Server (SUSE), please
-see http://packages.efficios.com/[EfficiOS Enterprise Packages].
-
[[building-from-source]]
=== Build from source
. Do some operation on your system for a few seconds. For example,
load a website, or list the files of a directory.
-. <<basic-tracing-session-control,Stop tracing>> and destroy the
+. <<creating-destroying-tracing-sessions,Destroy>> the current
tracing session:
+
--
[role="term"]
----
-# lttng stop
# lttng destroy
----
--
+
The man:lttng-destroy(1) command does not destroy the trace data; it
only destroys the state of the tracing session.
++
+The man:lttng-destroy(1) command also runs the man:lttng-stop(1) command
+implicitly (see <<basic-tracing-session-control,Start and stop a tracing
+session>>). You need to stop tracing to make LTTng flush the remaining
+trace data and make the trace readable.
. For the sake of this example, make the recorded trace accessible to
the non-root users:
. Go back to the running `hello` application and press Enter. The
program executes all `tracepoint()` instrumentation points and exits.
-. <<basic-tracing-session-control,Stop tracing>> and destroy the
+. <<creating-destroying-tracing-sessions,Destroy>> the current
tracing session:
+
--
[role="term"]
----
-$ lttng stop
$ lttng destroy
----
--
+
The man:lttng-destroy(1) command does not destroy the trace data; it
only destroys the state of the tracing session.
++
+The man:lttng-destroy(1) command also runs the man:lttng-stop(1) command
+implicitly (see <<basic-tracing-session-control,Start and stop a tracing
+session>>). You need to stop tracing to make LTTng flush the remaining
+trace data and make the trace readable.
By default, LTTng saves the traces in
+$LTTNG_HOME/lttng-traces/__name__-__date__-__time__+,
_tracing session mode_ dictates where to send it. The following modes
are available in LTTng{nbsp}{revision}:
-Local mode::
+[[local-mode]]Local mode::
LTTng writes the traces to the file system of the machine being traced
(target system).
-Network streaming mode::
+[[net-streaming-mode]]Network streaming mode::
LTTng sends the traces over the network to a
<<lttng-relayd,relay daemon>> running on a remote system.
or to send it over the network to a <<lttng-relayd,relay daemon>>
running on a remote system.
-Live mode::
+[[live-mode]]Live mode::
This mode is similar to the network streaming mode, but a live
trace viewer can connect to the distant relay daemon to
<<lttng-live,view event records as LTTng generates them>> by
fit.
In discard mode, LTTng increments a count of lost event records when an
-event record is lost and saves this count to the trace. In overwrite
-mode, since LTTng 2.8, LTTng increments a count of lost sub-buffers when
-a sub-buffer is lost and saves this count to the trace. In this mode,
-the exact number of lost event records in those lost sub-buffers is not
-saved to the trace. Trace analyses can use the trace's saved discarded
-event record and sub-buffer counts to decide whether or not to perform
-the analyses even if trace data is known to be missing.
+event record is lost and saves this count to the trace. Since
+LTTng{nbsp}2.8, in overwrite mode, LTTng writes to a given sub-buffer
+its sequence number within its data stream. With a <<local-mode,local>>,
+<<net-streaming-mode,network streaming>>, or <<live-mode,live>>
+<<tracing-session,tracing session>>, a trace reader can use such
+sequence numbers to report lost packets. In overwrite mode, LTTng
+doesn't write to the trace the exact number of lost event records in
+those lost sub-buffers.
+
+Trace analyses can use saved discarded event record and sub-buffer
+(packet) counts of the trace to decide whether or not to perform the
+analyses even if trace data is known to be missing.
There are a few ways to decrease your probability of losing event
records.
<<channel-subbuf-size-vs-subbuf-count,Sub-buffer count and size>> shows
-how you can fine-une the sub-buffer count and size of a channel to
+how you can fine-tune the sub-buffer count and size of a channel to
virtually stop losing event records, though at the cost of greater
memory usage.
* **LTTng-tools**: Libraries and command-line interface to
control tracing sessions.
** <<lttng-sessiond,Session daemon>> (man:lttng-sessiond(8)).
-** <<lttng-consumerd,Consumer daemon>> (man:lttng-consumerd(8)).
+** <<lttng-consumerd,Consumer daemon>> (cmd:lttng-consumerd).
** <<lttng-relayd,Relay daemon>> (man:lttng-relayd(8)).
** <<liblttng-ctl-lttng,Tracing control library>> (`liblttng-ctl`).
** <<lttng-cli,Tracing control command-line tool>> (man:lttng(1)).
.The consumer daemon.
image::plumbing-consumerd.png[]
-The _consumer daemon_, man:lttng-consumerd(8), is a daemon which shares
+The _consumer daemon_, cmd:lttng-consumerd, is a daemon which shares
ring buffers with user applications or with the LTTng kernel modules to
collect trace data and send it to some location (on disk or to a
<<lttng-relayd,relay daemon>> over the network). The consumer daemon
[[prebuilt-ust-helpers]]
=== Prebuilt user space tracing helpers
-The LTTng-UST package provides a few helpers in the form or preloadable
+The LTTng-UST package provides a few helpers in the form of preloadable
shared objects which automatically instrument system functions and
calls.
.LTTng-UST Java agent imported by a Java application.
image::java-app.png[]
-Note that the methods described below are new in LTTng{nbsp}{revision}.
+Note that the methods described below are new in LTTng{nbsp}2.8.
Previous LTTng versions use another technique.
NOTE: We use http://openjdk.java.net/[OpenJDK]{nbsp}8 for development
----
--
+The man:lttng-destroy(1) command also runs the man:lttng-stop(1)
+command implicitly (see <<basic-tracing-session-control,Start and stop a
+tracing session>>). You need to stop tracing to make LTTng flush the
+remaining trace data and make the trace readable.
+
[[list-instrumentation-points]]
=== List the available instrumentation points
function, this is a custom name given to the event rule. With the
JUL, log4j, and Python domains, this is a logger name.
-With a tracepoint, logger, or system call name, the last character
-can be `*` to match anything that remains.
+With a tracepoint, logger, or system call name, you can use the special
+`*` globbing character to match anything (for example, `sched_*`,
+`my_comp*:*msg_*`).
|All.
man:lttng-start(1), warnings are printed when you run the
man:lttng-stop(1) command.
+IMPORTANT: You need to stop tracing to make LTTng flush the remaining
+trace data and make the trace readable. Note that the
+man:lttng-destroy(1) command (see
+<<creating-destroying-tracing-sessions,Create and destroy a tracing
+session>>) also runs the man:lttng-stop(1) command implicitly.
+
[[enabling-disabling-channels]]
=== Create a channel
.PIDs 3, 7, 10, and 13 are removed from the whitelist.
image::track-1-4-15-16.png[]
-LTTng can track all possible PIDs again using the opt:track(1):--all
-option:
+LTTng can track all possible PIDs again using the
+opt:lttng-track(1):--all option:
[role="term"]
----
projects / lttng-docs.git / blobdiff