ltt/branches/poly/QUICKSTART

   1
   2 QUICKSTART
   3
   4 How to use LTTng and LTTV in a few lines :
   5
   6 This document is made of four parts : The first one explains how to install
   7 LTTng and LTTV from Debian and RPM binary packages, the second one explains how
   8 to install LTTng and LTTV from sources and the third one describes the steps
   9 to follow to trace a system and view it. The fourth and last part explains
  10 briefly how to add a new trace point to the kernel.
  11
  12 What you will typically want is to read sections 1 and 3 : install LTTng from
  13 binary packages and use it. If there are no packages ready for your system, you
  14 will have to install from sources (section 2) instead.
  15
  16 These operations are made for installing LTTng 0.3 on a linux 2.6.12-rc2-mm2
  17 kernel. Change the versions to fit your needs.
  18
  19 Author : Mathieu Desnoyers, September 2005
  20
  21
  22
  23 ***********************************************************
  24 ** Section 1 * Installation from Debian or RPM packages  **
  25 ***********************************************************
  26
  27 No Debian or RPM packages are ready yet.
  28
  29 TODO
  30
  31
  32 ***********************************************************
  33 ** Section 2 * Installation from sources                 **
  34 ***********************************************************
  35
  36 * Getting the LTTng packages
  37
  38 su -
  39 mkdir /usr/src/lttng
  40 cd /usr/src/lttng
  41 (see http://ltt.polymtl.ca/lttng for package listing)
  42 wget http://ltt.polymtl.ca/lttng/lttng-modules-0.2.tar.bz2
  43 wget http://ltt.polymtl.ca/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2
  44 bzip2 -cd lttng-modules-0.2.tar.bz2 | tar xvof -
  45
  46
  47 * Getting LTTng kernel sources
  48
  49 su -
  50 cd /usr/src
  51 wget http://kernel.org/pub/linux/kernel/v2.6/testing/linux-2.6.12-rc4.tar.bz2
  52 wget http://kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.12-rc4/2.6.12-rc4-mm2/2.6.12-rc4-mm2.bz2
  53 bzip2 -cd linux-2.6.12-rc4.tar.bz2 | tar xvof -
  54 cd linux-2.6.12-rc4
  55 bzip2 -cd ../2.6.12-rc4-mm2.bz2 | patch -p1
  56 bzip2 -cd /usr/src/lttng/patch-2.6.12-rc4-mm2-lttng-0.3.bz2 | patch -p1
  57 cd ..
  58 mv linux-2.6.12-rc4 linux-2.6.12-rc4-mm2-lttng-0.3
  59
  60
  61 * Installing a LTTng kernel
  62
  63 su -
  64 cd /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3
  65 make menuconfig
  66   General setup
  67     * Linux Trace Toolkit Instrumentation Support
  68     M or * Linux Trace Toolkit Tracer
  69     do NOT activate (not ready yet) :
  70         Align Linux Trace Toolkit Traces
  71         Activate Linux Trace Toolkit Heartbeat Timer
  72               IMPORTANT : This is enabled by default : you must disable it!
  73 make
  74 make install
  75 make modules_install
  76
  77 The first time you use relayfs, you have to specify a mount point in you system:
  78 mkdir /mnt/relayfs
  79 echo "relayfs         /mnt/relayfs    relayfs rw              0       0" \
  80    >> /etc/fstab
  81
  82 Depending on your boot loader, you may want to execute :
  83 update-grub or lilo
  84
  85 reboot
  86
  87
  88 * Install the ltt-modules
  89
  90 su -
  91 cd /usr/src/lttng/lttng-modules-0.2
  92 KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make
  93 KERNELDIR=/usr/src/linux-2.6.12-rc4-mm2-lttng-0.3 make modules_install
  94
  95 note : at this stage, you might want to execute
  96 modprobe ltt-control
  97
  98 and you might also want to do this :
  99 echo ltt-control >> /etc/modules
 100
 101
 102 * Getting and installing the LTTV package
 103
 104 su -
 105 cd /usr/src
 106 wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.6.2-20092005.tar.gz
 107 gzip -cd LinuxTraceToolkitViewer-0.6.2-20092005.tar.gz | tar xvof -
 108 cd LinuxTraceToolkitViewer-0.6.2-20092005
 109 (refer to README to see the development libraries that must be installed on you
 110 system)
 111 ./configure
 112 make
 113 make install
 114
 115
 116
 117
 118 ***********************************************************
 119 ** Section 3 * Using LTTng and LTTV                      **
 120 ***********************************************************
 121
 122 * Use graphical LTTV to control tracing and analyse traces
 123
 124 lttv-gui (or /usr/local/bin/lttv-gui)
 125   - Spot the "Tracing Control" icon : click on it
 126       (it's a traffic light icon)
 127     - enter the root password
 128     - click "start"
 129     - click "stop"
 130     - Yes
 131       * You should now see a trace
 132
 133 * Use text mode LTTng to control tracing
 134
 135 The tracing can be controlled from a terminal by using the lttctl command.
 136
 137 Start tracing :
 138
 139 lttctl -n trace -d -l /mnt/relayfs/ltt -t /tmp/trace1
 140
 141 Stop tracing and destroy trace channels :
 142
 143 lttctl -n trace -R
 144
 145 see lttctl --help for details.
 146
 147
 148 * Use text mode LTTV
 149
 150 Fell free to look in /usr/local/lib/lttv/plugins to see all the text and
 151 graphical plugins available.
 152
 153 For example, a simple trace dump in text format is available with :
 154
 155 lttv -m textDump -t /tmp/trace
 156
 157 see lttv -m textDump --help for detailed command line options of textDump.
 158
 159
 160
 161
 162 ***********************************************************
 163 ** Section 4 * Adding new instrumentations with genevent **
 164 ***********************************************************
 165
 166 * Getting and installing genevent
 167
 168 su -
 169 cd /usr/src
 170 wget http://ltt.polymtl.ca/packages/genevent-0.1.tar.gz
 171 gzip -cd genevent-0.1.tar.gz | tar xvof -
 172 cd genevent-0.1
 173 make
 174 make install
 175
 176
 177 * Add new events to the kernel with genevent
 178
 179 su -
 180 cd /usr/local/share/LinuxTraceToolkitViewer/facilities
 181 cp process.xml yourfacility.xml
 182   * edit yourfacility.xml to fit your needs.
 183 cd /tmp
 184 /usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/yourfacility.xml
 185 cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
 186          /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt
 187 cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
 188          /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/ltt
 189   * edit the kernel file you want to instrument
 190     - Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
 191       of the file.
 192     - Add a call to the tracing functions. See their names and parameters in
 193       /usr/src/linux-2.6.12-rc4-mm2-lttng-0.3/include/linux/ltt/ltt-facility-yourfacility.h
 194
 195
 196