+++ /dev/null
-
-QUICKSTART
-
-How to use LTTng and LTTV in a few lines :
-
-This document is made of four parts : The first one explains how to install
-LTTng and LTTV from Debian and RPM binary packages, the second one explains how
-to install LTTng and LTTV from sources and the third one describes the steps
-to follow to trace a system and view it. The fourth and last part explains
-briefly how to add a new trace point to the kernel and to user space
-applications.
-
-What you will typically want is to read sections 2 and 3 : install LTTng from
-sources and use it.
-
-These operations are made for installing the LTTng 0.5.X tracer on a
-linux 2.6.X kernel. You will also find instructions for installation of
-LTTV 0.8.x : the Linux Trace Toolkit Viewer.
-
-To see the list of compatibilities between LTTng, ltt-control, LTTV, genevent
-and ltt-usertrace, please refer to :
-http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
-
-
-
-The following lttng patch is necessary to have the tracing hooks in the kernel.
-The following ltt-control module controls the tracing.
-
-Required programs and librairies are assumed to be automatically installed in an
-installation with Debian or RPM packages. In the case of an installation from
-sources, the dependencies are listed.
-
-
-** Current development status **
-
-LTTng :
-supported architectures :
-Intel Pentium (UP/SMP) with TSC
-PowerPC 32 and 64 bits
-ARM
-x86_64
-C2 Microsystems (variant of MIPS)
-
-LTTV :
-supported architectures :
-Intel i386 and better
-Intel 64 bits
-PowerPC 32 and 64 bits
-
-
-
-Author : Mathieu Desnoyers, September 2005
-Last update : May 30, 2006
-
-
-***********************************************************
-** Section 1 * Installation from Debian or RPM packages **
-***********************************************************
-
-** NOTE : RPM and debian packages are only made once a version has been
- thoroughly tested. If they do not exist at the moment, please install from
- sources (see section 2 below). To see the list of compatibilities between
- LTTng, ltt-control, LTTV, genevent and lttng-modules, please refer to
- http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
-
-
-* Install from RPM packages on Fedora Core 4 :
-
-Get LTTV RPM from :
-
-http://ltt.polymtl.ca/packages/fedora/RPMS
-
-LTTV RPM are ready.
-
-LTTng kernel and lttng-modules RPM are available for some architectures (i586,
-i686). Feel free to help fix the spec files to have correct lttng-modules RPM
-package.
-
-
-* Install from Deb packages on Debian :
-
-You can use the ltt.polymtl.ca apt source to get LTTV for Debian :
-
-Add the following two sources to your /etc/apt/sources.list :
-
-deb http://ltt.polymtl.ca/packages/debian experimental main
-deb-src http://ltt.polymtl.ca/packages/debian experimental main
-
-
-* Install from precompiled binary packages (LTTV compiled only for i386, and
- LTTng only for i686 smp), perform the following :
-
-su -
-apt-get update
-apt-get install lttv lttv-doc
-apt-get install kernel-image-2.6.12-rc4-mm2-lttng-0.4.2
-apt-get install lttng-modules-modules-2.6.12-rc4-mm2-lttng-0.4.2
- * note : the packages are signed by myself. I am not considered a trusted
- Debian source yet, so warnings are normal.
-
-Then, follow the section "Editing the system wide configuration" in section 2.
-
-* Create custom LTTV Debian packages
-
-Binary packages are only available for i386. If you want to create your own LTTV
-packages for other platforms, do :
-
-su -
-cd /usr/src
-apt-get source lttv
-cd lttv-0.6.9
-dpkg-buildpackage -rfakeroot
-
-You should then have your LTTV .deb files created for your architecture.
-
-* Create custom LTTng packages
-
-For building LTTng Debian packages :
-
-su -
-apt-get install kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
-cd /usr/src
-bzip2 -cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2.tar.bz2 | tar xvof -
-cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
-make menuconfig (or xconfig or config) (customize your configuration)
-make-kpkg kernel_image
-
-You will then see your freshly created .deb in /usr/src. Install it with
-dpkg -i /usr/src/(image-name).deb
-
-You will also need to create a package for the lttng-modules :
-
-su -
-cd /usr/src
-apt-get source lttng-modules
-cd kernel-source-2.6.12-rc4-mm2-lttng-0.4.2
-make-kpkg --added_modules /usr/src/lttng-modules-0.3 modules_image
-
-You will then see your freshly created .deb in /usr/src. Install it with
-dpkg -i /usr/src/lttng-modules-modules-(your version).deb
-
-
-Then, follow the section "Editing the system wide configuration" in section 2.
-
-
-***********************************************************
-** Section 2 * Installation from sources **
-***********************************************************
-
-* Prerequisites
-
-Tools needed to follow the package download steps :
-
-o wget
-o bzip2
-o gzip
-o tar
-
-You have to install the standard development librairies and programs necessary
-to compile a kernel :
-
-(from Documentation/Changes in the Linux kernel tree)
-o Gnu C 2.95.3 # gcc --version
-o Gnu make 3.79.1 # make --version
-o binutils 2.12 # ld -v
-o util-linux 2.10o # fdformat --version
-o module-init-tools 0.9.10 # depmod -V
-
-You might also want to have libncurses5 to have the text mode kernel
-configuration menu, but there are alternatives.
-
-Prerequisites for LTTV 0.x.x installation are :
-
-gcc 3.2 or better
-gtk 2.4 or better development libraries
- (Debian : libgtk2.0, libgtk2.0-dev)
- (Fedora : gtk2, gtk2-devel)
- note : For Fedora users : this might require at least core 3 from Fedora,
- or you might have to compile your own GTK2 library.
-glib 2.4 or better development libraries
- (Debian : libglib2.0-0, libglib2.0-dev)
- (Fedora : glib2, glib2-devel)
-libpopt development libraries
- (Debian : libpopt0, libpopt-dev)
- (Fedora : popt)
-libpango development libraries
- (Debian : libpango1.0, libpango1.0-dev)
- (Fedora : pango, pango-devel)
-libc6 development librairies
- (Debian : libc6, libc6-dev)
- (Fedora : glibc, glibc)
-
-
-* Getting the LTTng packages
-
-su -
-mkdir /usr/src/lttng
-cd /usr/src/lttng
-(see http://ltt.polymtl.ca/lttng for package listing)
-wget http://ltt.polymtl.ca/lttng/patch-2.6.X-lttng-0.x.xx.tar.bz2
-bzip2 -cd patch-2.6.X-lttng-0.x.xx.tar.bz2 | tar xvof -
-
-
-* Getting LTTng kernel sources
-
-su -
-cd /usr/src
-wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.X.tar.bz2
-bzip2 -cd linux-2.6.X.tar.bz2 | tar xvof -
-cd linux-2.6.X
-cat /usr/src/lttng/patch-2.6.X-lttng-0.x.xx* | patch -p1
-cd ..
-mv linux-2.6.X linux-2.6.X-lttng-0.x.xx
-
-
-* Installing a LTTng kernel
-
-su -
-cd /usr/src/linux-2.6.X-lttng-0.x.xx
-make menuconfig (or make xconfig or make config)
- Select the < Help > button if you are not familiar with kernel
- configuration.
- Items preceded by [*] means they has to be built into the kernel.
- Items preceded by [M] means they has to be built as modules.
- Items preceded by [ ] means they should be removed.
- go to the "Instrumentation Support" section
- Select the following options :
- [*] Linux Trace Toolkit Instrumentation Support
- <M> or <*> Linux Trace Toolkit Tracer
- It makes no difference for the rest of the procedure whether the Tracer
- is compiled built-in or as a module.
- activate :
- [*] Align Linux Trace Toolkit Traces
- [*] Allow tracing from userspace
- your choice (see < Help >) :
- [ ] Activate Linux Trace Toolkit Heartbeat Timer
- You may or may not activate instrumentation per facility. They are all
- selected for logging by default. It can be used as a compile time filter to
- enable/disable logging of events. It is useful to discard events with a
- minimal impact on the system and especially useful for now, as the dynamic
- filter has not been implemented yet.
- Select <Exit>
- Select <Exit>
- Select <Yes>
-make
-make modules_install
-
--- on X86, X86_64
-make install
-reboot
-Select the Linux 2.6.17-lttng-0.x.xx kernel in your boot loader.
-
--- on PowerPC
-cp vmlinux.strip /boot/vmlinux-2.6.X-lttng-0.x.xx
-cp System.map /boot/System.map-2.6.X-lttng-0.x.xx
-cp .config /boot/config-2.6.X-lttng-0.x.xx
-depmod -ae -F /boot/System.map-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx
-mkinitrd /boot/initrd.img-2.6.X-lttng-0.x.xx 2.6.X-lttng-0.x.xx
-(edit /etc/yaboot.conf to add a new entry pointing to your kernel : the entry
-that comes first is the default kernel)
-ybin
-select the right entry at the yaboot prompt (see choices : tab, select : type
-the kernel name followed by enter)
-Select the Linux 2.6.17-lttng-0.x.xx kernel in your boot loader.
---
-
-
-
-* Editing the system wide configuration
-
-You must activate debugfs and specify a mount point. This is typically done in
-fstab such that it happens at boot time.
-
-If you have never used DebugFS before, these operation would do this for you :
-
-mkdir /mnt/debugfs
-cp /etc/fstab /etc/fstab.lttng.bkp
-echo "debugfs /mnt/debugfs debugfs rw 0 0" >> /etc/fstab
-
-then, rebooting or issuing the following command will activate debugfs :
-
-mount /mnt/debugfs
-
-You need to load the ltt-control module to be able to control tracing from user
-space. This is done by issuing the command :
-
-modprobe ltt-control
-modprobe ltt-core
-modprobe ltt-relay
-
-If you want to have complete information about the kernel state (including all
-the process names), you need to load the ltt-statedump module. This is done by
-issuing the command :
-
-modprobe ltt-statedump
-
-You can automate at boot time loading the ltt-control module by :
-
-echo ltt-control >> /etc/modules
-echo ltt-core >> /etc/modules
-echo ltt-relay >> /etc/modules
-echo ltt-statedump >> /etc/modules
-
-
-* Getting and installing the ltt-control package (on the traced machine)
-(note : the ltt-control package contains lttd and lttctl. Although it has the
-same name as the ltt-control kernel module, they are *not* the same thing.)
-su -
-cd /usr/src
-wget http://ltt.polymtl.ca/lttng/ltt-control-0.x-xxxx2006.tar.gz
-gzip -cd ltt-control-0.x-xxxx2006.tar.gz | tar xvof -
-cd ltt-control-0.x-xxxx2006
-(refer to README to see the development libraries that must be installed on you
-system)
-./configure
-make
-make install
-
-* Getting and installing the ltt-usertrace package for user space tracing
-See http://ltt.polymtl.ca/ > USERSPACE TRACING QUICKSTART
-
-
-* Getting and installing the LTTV package (on the visualisation machine, same or
- different from the visualisation machine)
-
-su -
-cd /usr/src
-wget http://ltt.polymtl.ca/packages/LinuxTraceToolkitViewer-0.x.xx-xxxx2006.tar.gz
-gzip -cd LinuxTraceToolkitViewer-0.x.xx-xxxx2006.tar.gz | tar xvof -
-cd LinuxTraceToolkitViewer-0.x.xx-xxxx2006
-(refer to README to see the development libraries that must be installed on you
-system)
-./configure
-make
-make install
-
-
-
-
-***********************************************************
-** Section 3 * Using LTTng and LTTV **
-***********************************************************
-
-* Use graphical LTTV to control tracing and analyse traces
-
-lttv-gui (or /usr/local/bin/lttv-gui)
- - Spot the "Tracing Control" icon : click on it
- (it's a traffic light icon)
- - enter the root password
- - click "start"
- - click "stop"
- - Yes
- * You should now see a trace
-
-* Use text mode LTTng to control tracing
-
-The tracing can be controlled from a terminal by using the lttctl command (as
-root).
-
-Start tracing :
-
-lttctl -n trace -d -l /mnt/debugfs/ltt -t /tmp/trace
-
-Stop tracing and destroy trace channels :
-
-lttctl -n trace -R
-
-see lttctl --help for details.
-
-
-* Use text mode LTTV
-
-Fell free to look in /usr/local/lib/lttv/plugins to see all the text and
-graphical plugins available.
-
-For example, a simple trace dump in text format is available with :
-
-lttv -m textDump -t /tmp/trace
-
-see lttv -m textDump --help for detailed command line options of textDump.
-
-
-
-
-***********************************************************
-** Section 4 * Adding new instrumentations with genevent **
-***********************************************************
-
-* Getting and installing genevent
-
-su -
-cd /usr/src
-wget http://ltt.polymtl.ca/packages/genevent-0.xx.tar.gz
-gzip -cd genevent-0.xx.tar.gz | tar xvof -
-cd genevent-0.xx
-make
-make install
-
-
-* Add new events to the kernel with genevent
-
-su -
-cd /usr/local/share/LinuxTraceToolkitViewer/facilities
-cp process.xml yourfacility.xml
- * edit yourfacility.xml to fit your needs.
-cd /tmp
-/usr/local/bin/genevent /usr/local/share/LinuxTraceToolkitViewer/facilities/yourfacility.xml
-cp ltt-facility-yourfacility.h ltt-facility-id-yourfacility.h \
- /usr/src/linux-2.6.17-lttng-0.x.xx8/include/linux/ltt
-cp ltt-facility-loader-yourfacility.c ltt-facility-loader-yourfacility.h \
- /usr/src/linux-2.6.17-lttng-0.x.xx/ltt
- * edit the kernel file you want to instrument
- - Add #include <linux/ltt/ltt-facility-yourfacility.h> at the beginning
- of the file.
- - Add a call to the tracing functions. See their names and parameters in
- /usr/src/linux-2.6.17-lttng-0.x.xx/include/linux/ltt/ltt-facility-yourfacility.h
-
-* Add new events to userspace programs with genevent
-See http://ltt.polymtl.ca/ > USERSPACE TRACING QUICKSTART
-
-
-
-
projects / lttv.git / blobdiff