scripts/liburcu/build.sh

   1 #!/bin/bash
   2 #
   3 # SPDX-FileCopyrightText: 2015 Jonathan Rajotte-Julien <jonathan.rajotte-julien@efficios.com>
   4 # SPDX-FileCopyrightText: 2016-2023 Michael Jeanson <mjeanson@efficios.com>
   5 # SPDX-License-Identifier: GPL-2.0-or-later
   6
   7 set -exu
   8
   9 # Version compare functions
  10 vercomp () {
  11     set +u
  12     if [[ "$1" == "$2" ]]; then
  13         return 0
  14     fi
  15     local IFS=.
  16     # Ignore the shellcheck warning, we want splitting to happen based on IFS.
  17     # shellcheck disable=SC2206
  18     local i ver1=($1) ver2=($2)
  19     # fill empty fields in ver1 with zeros
  20     for ((i=${#ver1[@]}; i<${#ver2[@]}; i++)); do
  21         ver1[i]=0
  22     done
  23     for ((i=0; i<${#ver1[@]}; i++)); do
  24         if [[ -z ${ver2[i]} ]]; then
  25             # fill empty fields in ver2 with zeros
  26             ver2[i]=0
  27         fi
  28         if ((10#${ver1[i]} > 10#${ver2[i]})); then
  29             return 1
  30         fi
  31         if ((10#${ver1[i]} < 10#${ver2[i]})); then
  32             return 2
  33         fi
  34     done
  35     set -u
  36     return 0
  37 }
  38
  39 verlte() {
  40     vercomp "$1" "$2"; local res="$?"
  41     [ "$res" -eq "0" ] || [ "$res" -eq "2" ]
  42 }
  43
  44 verlt() {
  45     vercomp "$1" "$2"; local res="$?"
  46     [ "$res" -eq "2" ]
  47 }
  48
  49 vergte() {
  50     vercomp "$1" "$2"; local res="$?"
  51     [ "$res" -eq "0" ] || [ "$res" -eq "1" ]
  52 }
  53
  54 vergt() {
  55     vercomp "$1" "$2"; local res="$?"
  56     [ "$res" -eq "1" ]
  57 }
  58
  59 verne() {
  60     vercomp "$1" "$2"; local res="$?"
  61     [ "$res" -ne "0" ]
  62 }
  63
  64 print_header() {
  65     set +x
  66
  67     local message=" $1 "
  68     local message_len
  69     local padding_len
  70
  71     message_len="${#message}"
  72     padding_len=$(( (80 - (message_len)) / 2 ))
  73
  74     printf '\n'; printf -- '#%.0s' {1..80}; printf '\n'
  75     printf -- '-%.0s' {1..80}; printf '\n'
  76     printf -- '#%.0s' $(seq 1 $padding_len); printf '%s' "$message"; printf -- '#%.0s' $(seq 1 $padding_len); printf '\n'
  77     printf -- '-%.0s' {1..80}; printf '\n'
  78     printf -- '#%.0s' {1..80}; printf '\n\n'
  79
  80     set -x
  81 }
  82
  83 failed_configure() {
  84     # Assume we are in the configured build directory
  85     print_header "BEGIN config.log"
  86     cat config.log
  87     print_header "END config.log"
  88
  89     # End the build with failure
  90     exit 1
  91 }
  92
  93 print_header "Liburcu build script starting"
  94
  95 # Required variables
  96 WORKSPACE=${WORKSPACE:-}
  97
  98 # Axis
  99 platform=${platform:-}
 100 conf=${conf:-}
 101 build=${build:-}
 102 cc=${cc:-}
 103
 104 # Build steps that can be overriden by the environment
 105 USERSPACE_RCU_MAKE_INSTALL="${USERSPACE_RCU_MAKE_INSTALL:-yes}"
 106 USERSPACE_RCU_MAKE_CLEAN="${USERSPACE_RCU_MAKE_CLEAN:-yes}"
 107 USERSPACE_RCU_GEN_COMPILE_COMMANDS="${USERSPACE_RCU_GEN_COMPILE_COMMANDS:-no}"
 108 USERSPACE_RCU_RUN_TESTS="${USERSPACE_RCU_RUN_TESTS:-yes}"
 109 USERSPACE_RCU_CLANG_TIDY="${USERSPACE_RCU_CLANG_TIDY:-no}"
 110
 111 SRCDIR="$WORKSPACE/src/liburcu"
 112 TMPDIR="$WORKSPACE/tmp"
 113 PREFIX="/build"
 114 LIBDIR="lib"
 115 LIBDIR_ARCH="$LIBDIR"
 116
 117 # RHEL and SLES both use lib64 but don't bother shipping a default autoconf
 118 # site config that matches this.
 119 if [[ ( -f /etc/redhat-release || -f /etc/products.d/SLES.prod || -f /etc/yocto-release ) ]]; then
 120     # Detect the userspace bitness in a distro agnostic way
 121     if file -L /bin/bash | grep '64-bit' >/dev/null 2>&1; then
 122         LIBDIR_ARCH="${LIBDIR}64"
 123     fi
 124 fi
 125
 126 exit_status=0
 127
 128 # Use bear to generate compile_commands.json when enabled
 129 BEAR=""
 130 if [ "$USERSPACE_RCU_GEN_COMPILE_COMMANDS" = "yes" ]; then
 131         BEAR="bear"
 132 fi
 133
 134 # Create tmp directory
 135 rm -rf "$TMPDIR"
 136 mkdir -p "$TMPDIR"
 137
 138 export TMPDIR
 139 export CFLAGS="-g -O2"
 140 export CXXFLAGS="-g -O2"
 141
 142 # Set compiler variables
 143 case "$cc" in
 144 gcc)
 145     export CC=gcc
 146     export CXX=g++
 147     ;;
 148 gcc-*)
 149     export CC=gcc-${cc#gcc-}
 150     export CXX=g++-${cc#gcc-}
 151     ;;
 152 clang)
 153     export CC=clang
 154     export CXX=clang++
 155     ;;
 156 clang-*)
 157     export CC=clang-${cc#clang-}
 158     export CXX=clang++-${cc#clang-}
 159     ;;
 160 *)
 161     if [ "x$cc" != "x" ]; then
 162             export CC="$cc"
 163     fi
 164     ;;
 165 esac
 166
 167 # Set platform variables
 168 case "$platform" in
 169 macos*)
 170     export MAKE=make
 171     export TAR=tar
 172     export NPROC="getconf _NPROCESSORS_ONLN"
 173     export PATH="/opt/local/bin:/opt/local/sbin:/usr/local/bin:/usr/bin:/bin:/usr/sbin:/sbin"
 174     export CPPFLAGS="-I/opt/local/include"
 175     export LDFLAGS="-L/opt/local/lib"
 176     export PYTHON="python3"
 177     export PYTHON_CONFIG="python3-config"
 178     ;;
 179
 180 freebsd*)
 181     export MAKE=gmake
 182     export TAR=tar
 183     export NPROC="getconf _NPROCESSORS_ONLN"
 184     export CPPFLAGS="-I/usr/local/include"
 185     export LDFLAGS="-L/usr/local/lib"
 186     export PYTHON="python3"
 187     export PYTHON_CONFIG="python3-config"
 188     ;;
 189
 190 *)
 191     export MAKE=make
 192     export TAR=tar
 193     export NPROC=nproc
 194     export PYTHON="python3"
 195     export PYTHON_CONFIG="python3-config"
 196     ;;
 197 esac
 198
 199 # Print build env details
 200 print_header "Build environment details"
 201 print_os || true
 202 print_tooling || true
 203
 204 # Enter the source directory
 205 cd "$SRCDIR"
 206
 207 # Run bootstrap in the source directory prior to configure
 208 print_header "Bootstrap autotools"
 209 ./bootstrap
 210
 211 # Get source version from configure script
 212 eval "$(grep '^PACKAGE_VERSION=' ./configure)"
 213 PACKAGE_VERSION=${PACKAGE_VERSION//\-pre*/}
 214
 215 # Set configure options and environment variables for each build
 216 # configuration.
 217 CONF_OPTS=("--prefix=$PREFIX" "--libdir=$PREFIX/$LIBDIR_ARCH" "--disable-maintainer-mode")
 218 case "$conf" in
 219 static)
 220     print_header "Conf: Static lib only"
 221
 222     CONF_OPTS+=("--enable-static" "--disable-shared")
 223     ;;
 224
 225 tls_fallback)
 226     print_header  "Conf: Use pthread_getspecific() to emulate TLS"
 227
 228     CONF_OPTS+=("--disable-compiler-tls")
 229     ;;
 230
 231 debug-rcu)
 232     print_header "Conf: Enable RCU sanity checks for debugging"
 233
 234     if vergte "$PACKAGE_VERSION" "0.10"; then
 235        CONF_OPTS+=("--enable-rcu-debug")
 236     else
 237        export CFLAGS="$CFLAGS -DDEBUG_RCU"
 238     fi
 239
 240     echo "Enable iterator sanity validator"
 241     if vergte "$PACKAGE_VERSION" "0.11"; then
 242        CONF_OPTS+=("--enable-cds-lfht-iter-debug")
 243     fi
 244     ;;
 245
 246 atomic-builtins)
 247     print_header  "Conf: Enable the use of compiler atomic builtins."
 248
 249     CONF_OPTS+=("--enable-compiler-atomic-builtins")
 250     ;;
 251
 252 *)
 253     print_header "Conf: Standard"
 254     ;;
 255 esac
 256
 257 # Build type
 258 # oot     : out-of-tree build
 259 # dist    : build via make dist
 260 # oot-dist: build via make dist out-of-tree
 261 # *       : normal tree build
 262 #
 263 # Make sure to move to the build directory and run configure
 264 # before continuing.
 265 case "$build" in
 266 oot)
 267     print_header "Build: Out of tree"
 268
 269     # Create and enter a temporary build directory
 270     builddir=$(mktemp -d)
 271     cd "$builddir"
 272
 273     "$SRCDIR/configure" "${CONF_OPTS[@]}" || failed_configure
 274     ;;
 275
 276 dist)
 277     print_header "Build: Distribution In-tree"
 278
 279     # Run configure and generate the tar file
 280     # in the source directory
 281     ./configure || failed_configure
 282     $MAKE dist
 283
 284     # Create and enter a temporary build directory
 285     builddir=$(mktemp -d)
 286     cd "$builddir"
 287
 288     # Extract the distribution tar in the build directory,
 289     # ignore the first directory level
 290     $TAR xvf "$SRCDIR"/*.tar.* --strip 1
 291
 292     # Build in extracted source tree
 293     ./configure "${CONF_OPTS[@]}" || failed_configure
 294     ;;
 295
 296 oot-dist)
 297     print_header "Build: Distribution Out of tree"
 298
 299     # Create and enter a temporary build directory
 300     builddir=$(mktemp -d)
 301     cd "$builddir"
 302
 303     # Run configure out of tree and generate the tar file
 304     "$SRCDIR/configure" || failed_configure
 305     $MAKE dist
 306
 307     dist_srcdir="$(mktemp -d)"
 308     cd "$dist_srcdir"
 309
 310     # Extract the distribution tar in the new source directory,
 311     # ignore the first directory level
 312     $TAR xvf "$builddir"/*.tar.* --strip 1
 313
 314     # Create and enter a second temporary build directory
 315     builddir="$(mktemp -d)"
 316     cd "$builddir"
 317
 318     # Run configure from the extracted distribution tar,
 319     # out of the source tree
 320     "$dist_srcdir/configure" "${CONF_OPTS[@]}" || failed_configure
 321     ;;
 322
 323 *)
 324     print_header "Build: Standard In-tree"
 325
 326     ./configure "${CONF_OPTS[@]}" || failed_configure
 327     ;;
 328 esac
 329
 330 # We are now inside a configured build directory
 331
 332 # BUILD!
 333 print_header "BUILD!"
 334 $BEAR ${BEAR:+--} $MAKE -j "$($NPROC)" V=1
 335
 336 # Install in the workspace if enabled
 337 if [ "$USERSPACE_RCU_MAKE_INSTALL" = "yes" ]; then
 338     print_header "Install"
 339
 340     $MAKE install V=1 DESTDIR="$WORKSPACE"
 341
 342     # Cleanup rpath in executables and shared libraries
 343     #find "$WORKSPACE/$PREFIX/bin" -type f -perm -0500 -exec chrpath --delete {} \;
 344     find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.so" -exec chrpath --delete {} \;
 345
 346     # Remove libtool .la files
 347     find "$WORKSPACE/$PREFIX/$LIBDIR_ARCH" -name "*.la" -delete
 348 fi
 349
 350 # Run clang-tidy on the topmost commit
 351 if [ "$USERSPACE_RCU_CLANG_TIDY" = "yes" ]; then
 352     print_header "Run clang-tidy"
 353
 354     # This would be better by linting only the lines touched by a patch but it
 355     # doesn't seem to work, the lines are always filtered and no error is
 356     # reported.
 357     #git diff -U0 HEAD^ | clang-tidy-diff -p1 -j "$($NPROC)" -timeout 60 -fix
 358
 359     # Instead, run clan-tidy on all the files touched by the patch.
 360     while read -r filepath; do
 361         if [[ "$filepath" =~ (\.cpp|\.hhp|\.c|\.h)$ ]]; then
 362             clang-tidy --fix-errors "$(realpath "$filepath")"
 363         fi
 364     done < <(git diff-tree --no-commit-id --diff-filter=d --name-only -r HEAD)
 365
 366     # If the tree has local changes, the formatting was incorrect
 367     GIT_DIFF_OUTPUT=$(git diff)
 368     if [ -n "$GIT_DIFF_OUTPUT" ]; then
 369         echo "Saving clang-tidy proposed fixes in clang-tidy-fixes.diff"
 370         git diff > "$WORKSPACE/clang-tidy-fixes.diff"
 371
 372         # Restore the unfixed files so they can be viewed in the warnings web
 373         # interface
 374         git checkout .
 375         exit_status=1
 376     fi
 377 fi
 378
 379 # Run tests if enabled
 380 if [ "$USERSPACE_RCU_RUN_TESTS" = "yes" ]; then
 381     print_header "Run test suite"
 382
 383     # Run tests, don't fail now, we want to run the archiving steps
 384     $MAKE --keep-going check || exit_status=1
 385
 386     # Only run regtest for 0.9 and up
 387     if vergte "$PACKAGE_VERSION" "0.9"; then
 388        $MAKE --keep-going regtest || exit_status=1
 389     fi
 390
 391     # Copy tap logs for the jenkins tap parser before cleaning the build dir
 392     rsync -a --exclude 'test-suite.log' --include '*/' --include '*.log' --exclude='*' tests/ "$WORKSPACE/tap"
 393
 394     # Copy the test suites top-level log which includes all tests failures
 395     rsync -a --include 'test-suite.log' --include '*/' --exclude='*' tests/ "$WORKSPACE/log"
 396
 397     # The test suite prior to 0.11 did not produce TAP logs
 398     if verlt "$PACKAGE_VERSION" "0.11"; then
 399         mkdir -p "$WORKSPACE/tap/no-log"
 400         echo "1..1" > "$WORKSPACE/tap/no-log/tests.log"
 401         echo "ok 1 - Test suite doesn't support logging" >> "$WORKSPACE/tap/no-log/tests.log"
 402     fi
 403 fi
 404
 405 # Clean the build directory
 406 if [ "$USERSPACE_RCU_MAKE_CLEAN" = "yes" ]; then
 407     print_header "Clean"
 408     $MAKE clean
 409 fi
 410
 411 print_header "Liburcu build script ended with: $(test $exit_status == 0 && echo SUCCESS || echo FAILURE)"
 412
 413 # Exit with failure if any of the tests failed
 414 exit $exit_status
 415
 416 # EOF
 417 # vim: expandtab tabstop=4 shiftwidth=4