automation/preseed.cfg

   1 ### Localization
   2 # Preseeding only locale sets language, country and locale.
   3 d-i debian-installer/language string en
   4 d-i debian-installer/country string CA
   5 d-i debian-installer/locale string en_US.UTF-8
   6 # Optionally specify additional locales to be generated.
   7 #d-i localechooser/supported-locales en_US.UTF-8, nl_NL.UTF-8
   8
   9 # Keyboard selection.
  10 # Disable automatic (interactive) keymap detection.
  11 d-i console-setup/ask_detect boolean false
  12 #d-i keyboard-configuration/modelcode string pc105
  13 d-i keyboard-configuration/layoutcode string us
  14 # To select a variant of the selected layout (if you leave this out, the
  15 # basic form of the layout will be used):
  16 #d-i keyboard-configuration/variantcode string dvorak
  17
  18 ### Network configuration
  19 # Disable network configuration entirely. This is useful for cdrom
  20 # installations on non-networked devices where the network questions,
  21 # warning and long timeouts are a nuisance.
  22 #d-i netcfg/enable boolean false
  23
  24 # netcfg will choose an interface that has link if possible. This makes it
  25 # skip displaying a list if there is more than one interface.
  26 d-i netcfg/choose_interface select auto
  27
  28 # To pick a particular interface instead:
  29 #d-i netcfg/choose_interface select eth1
  30
  31 # If you have a slow dhcp server and the installer times out waiting for
  32 # it, this might be useful.
  33 #d-i netcfg/dhcp_timeout string 60
  34
  35 # If you prefer to configure the network manually, uncomment this line and
  36 # the static network configuration below.
  37 #d-i netcfg/disable_autoconfig boolean true
  38
  39 # If you want the preconfiguration file to work on systems both with and
  40 # without a dhcp server, uncomment these lines and the static network
  41 # configuration below.
  42 #d-i netcfg/dhcp_failed note
  43 #d-i netcfg/dhcp_options select Configure network manually
  44
  45 # Static network configuration.
  46 #d-i netcfg/get_nameservers string 192.168.1.1
  47 #d-i netcfg/get_ipaddress string 192.168.1.42
  48 #d-i netcfg/get_netmask string 255.255.255.0
  49 #d-i netcfg/get_gateway string 192.168.1.1
  50 #d-i netcfg/confirm_static boolean true
  51
  52 # Any hostname and domain names assigned from dhcp take precedence over
  53 # values set here. However, setting the values still prevents the questions
  54 # from being shown, even if values come from dhcp.
  55 d-i netcfg/get_hostname string unassigned-hostname
  56 d-i netcfg/get_domain string unassigned-domain
  57 d-i netcfg/get_hostname seen true
  58 d-i netcfg/get_domain seen true
  59
  60 # Disable that annoying WEP key dialog.
  61 d-i netcfg/wireless_wep string
  62 # The wacky dhcp hostname that some ISPs use as a password of sorts.
  63 #d-i netcfg/dhcp_hostname string radish
  64
  65 # If non-free firmware is needed for the network or other hardware, you can
  66 # configure the installer to always try to load it, without prompting. Or
  67 # change to false to disable asking.
  68 #d-i hw-detect/load_firmware boolean true
  69
  70 ### Network console
  71 # Use the following settings if you wish to make use of the network-console
  72 # component for remote installation over SSH. This only makes sense if you
  73 # intend to perform the remainder of the installation manually.
  74 #d-i anna/choose_modules string network-console
  75 #d-i network-console/password password r00tme
  76 #d-i network-console/password-again password r00tme
  77 # Use this instead if you prefer to use key-based authentication
  78 #d-i network-console/authorized_keys_url http://host/authorized_keys
  79
  80 ### Mirror settings
  81 # If you select ftp, the mirror/country string does not need to be set.
  82 #d-i mirror/protocol string ftp
  83 d-i mirror/country string manual
  84 d-i mirror/http/hostname string ca.archive.ubuntu.com
  85 d-i mirror/http/directory string /ubuntu
  86 d-i mirror/http/proxy string http://artifacts.internal.efficios.com:3128
  87
  88 # Alternatively: by default, the installer uses CC.archive.ubuntu.com where
  89 # CC is the ISO-3166-2 code for the selected country. You can preseed this
  90 # so that it does so without asking.
  91 #d-i mirror/http/mirror select CC.archive.ubuntu.com
  92
  93 # Suite to install.
  94 #d-i mirror/suite string squeeze
  95 # Suite to use for loading installer components (optional).
  96 #d-i mirror/udeb/suite string squeeze
  97 # Components to use for loading installer components (optional).
  98 #d-i mirror/udeb/components multiselect main, restricted
  99
 100 ### Clock and time zone setup
 101 # Controls whether or not the hardware clock is set to UTC.
 102 d-i clock-setup/utc boolean true
 103
 104 # You may set this to any valid setting for $TZ; see the contents of
 105 # /usr/share/zoneinfo/ for valid values.
 106 d-i time/zone string US/Eastern
 107
 108 # Controls whether to use NTP to set the clock during the install
 109 d-i clock-setup/ntp boolean true
 110 # NTP server to use. The default is almost always fine here.
 111 #d-i clock-setup/ntp-server string ntp.example.com
 112
 113 ### Partitioning
 114 ## Partitioning example
 115 # If the system has free space you can choose to only partition that space.
 116 # This is only honoured if partman-auto/method (below) is not set.
 117 # Alternatives: custom, some_device, some_device_crypto, some_device_lvm.
 118 #d-i partman-auto/init_automatically_partition select biggest_free
 119
 120 # Alternatively, you may specify a disk to partition. If the system has only
 121 # one disk the installer will default to using that, but otherwise the device
 122 # name must be given in traditional, non-devfs format (so e.g. /dev/hda or
 123 # /dev/sda, and not e.g. /dev/discs/disc0/disc).
 124 # For example, to use the first SCSI/SATA hard disk:
 125 d-i partman-auto/disk string
 126 # In addition, you'll need to specify the method to use.
 127 # The presently available methods are:
 128 # - regular: use the usual partition types for your architecture
 129 # - lvm:     use LVM to partition the disk
 130 # - crypto:  use LVM within an encrypted partition
 131 d-i partman-auto/method string regular
 132
 133 # If one of the disks that are going to be automatically partitioned
 134 # contains an old LVM configuration, the user will normally receive a
 135 # warning. This can be preseeded away...
 136 d-i partman-lvm/device_remove_lvm boolean true
 137 # The same applies to pre-existing software RAID array:
 138 d-i partman-md/device_remove_md boolean true
 139 # And the same goes for the confirmation to write the lvm partitions.
 140 d-i partman-lvm/confirm boolean true
 141
 142 # For LVM partitioning, you can select how much of the volume group to use
 143 # for logical volumes.
 144 #d-i partman-auto-lvm/guided_size string max
 145 #d-i partman-auto-lvm/guided_size string 10GB
 146 #d-i partman-auto-lvm/guided_size string 50%
 147
 148 # You can choose one of the three predefined partitioning recipes:
 149 # - atomic: all files in one partition
 150 # - home:   separate /home partition
 151 # - multi:  separate /home, /usr, /var, and /tmp partitions
 152 #d-i partman-auto/choose_recipe select atomic
 153
 154 # Or provide a recipe of your own...
 155 # If you have a way to get a recipe file into the d-i environment, you can
 156 # just point at it.
 157 #d-i partman-auto/expert_recipe_file string /hd-media/recipe
 158
 159 d-i partman-basicfilesystems/no_swap boolean false
 160
 161 # If not, you can put an entire recipe into the preconfiguration file in one
 162 # (logical) line. This example creates a small /boot partition, suitable
 163 # swap, and uses the rest of the space for the root partition:
 164 d-i partman-auto/expert_recipe string                         \
 165       boot-root ::                                            \
 166               500 10000 1000000000 ext4                       \
 167                       method{ format } format{ }              \
 168                       use_filesystem{ } filesystem{ ext4 }    \
 169                       mountpoint{ / }                         \
 170               .                                               \
 171
 172 # If you just want to change the default filesystem from ext3 to something
 173 # else, you can do that without providing a full recipe.
 174 #d-i partman/default_filesystem string ext4
 175
 176 # The full recipe format is documented in the file partman-auto-recipe.txt
 177 # included in the 'debian-installer' package or available from D-I source
 178 # repository. This also documents how to specify settings such as file
 179 # system labels, volume group names and which physical devices to include
 180 # in a volume group.
 181
 182 # This makes partman automatically partition without confirmation, provided
 183 # that you told it what to do using one of the methods above.
 184 d-i partman-partitioning/confirm_write_new_label boolean true
 185 d-i partman/choose_partition select finish
 186 d-i partman/confirm boolean true
 187 d-i partman/confirm_nooverwrite boolean true
 188
 189 ## Partitioning using RAID
 190 # The method should be set to "raid".
 191 #d-i partman-auto/method string raid
 192 # Specify the disks to be partitioned. They will all get the same layout,
 193 # so this will only work if the disks are the same size.
 194 #d-i partman-auto/disk string /dev/sda /dev/sdb
 195
 196 # Next you need to specify the physical partitions that will be used.
 197 #d-i partman-auto/expert_recipe string \
 198 #      multiraid ::                                         \
 199 #              1000 5000 4000 raid                          \
 200 #                      $primary{ } method{ raid }           \
 201 #              .                                            \
 202 #              64 512 300% raid                             \
 203 #                      method{ raid }                       \
 204 #              .                                            \
 205 #              500 10000 1000000000 raid                    \
 206 #                      method{ raid }                       \
 207 #              .
 208
 209 # Last you need to specify how the previously defined partitions will be
 210 # used in the RAID setup. Remember to use the correct partition numbers
 211 # for logical partitions. RAID levels 0, 1, 5, 6 and 10 are supported;
 212 # devices are separated using "#".
 213 # Parameters are:
 214 # <raidtype> <devcount> <sparecount> <fstype> <mountpoint> \
 215 #          <devices> <sparedevices>
 216
 217 #d-i partman-auto-raid/recipe string \
 218 #    1 2 0 ext3 /                    \
 219 #          /dev/sda1#/dev/sdb1       \
 220 #    .                               \
 221 #    1 2 0 swap -                    \
 222 #          /dev/sda5#/dev/sdb5       \
 223 #    .                               \
 224 #    0 2 0 ext3 /home                \
 225 #          /dev/sda6#/dev/sdb6       \
 226 #    .
 227
 228 # For additional information see the file partman-auto-raid-recipe.txt
 229 # included in the 'debian-installer' package or available from D-I source
 230 # repository.
 231
 232 # This makes partman automatically partition without confirmation.
 233 d-i partman-md/confirm boolean true
 234 d-i partman-partitioning/confirm_write_new_label boolean true
 235 d-i partman/choose_partition select finish
 236 d-i partman/confirm boolean true
 237 d-i partman/confirm_nooverwrite boolean true
 238
 239 ## Controlling how partitions are mounted
 240 # The default is to mount by UUID, but you can also choose "traditional" to
 241 # use traditional device names, or "label" to try filesystem labels before
 242 # falling back to UUIDs.
 243 #d-i partman/mount_style select uuid
 244
 245 ### Base system installation
 246 # Configure APT to not install recommended packages by default. Use of this
 247 # option can result in an incomplete system and should only be used by very
 248 # experienced users.
 249 #d-i base-installer/install-recommends boolean false
 250
 251 # The kernel image (meta) package to be installed; "none" can be used if no
 252 # kernel is to be installed.
 253 #d-i base-installer/kernel/image string linux-generic
 254
 255 ### Account setup
 256 # Skip creation of a root account (normal user account will be able to
 257 # use sudo). The default is false; preseed this to true if you want to set
 258 # a root password.
 259 d-i passwd/root-login boolean false
 260 # Alternatively, to skip creation of a normal user account.
 261 d-i passwd/make-user boolean true
 262
 263 # Root password, either in clear text
 264 #d-i passwd/root-password password r00tme
 265 #d-i passwd/root-password-again password r00tme
 266 # or encrypted using an MD5 hash.
 267 #d-i passwd/root-password-crypted password
 268
 269 # To create a normal user account.
 270 d-i passwd/user-fullname string Jenkins User
 271 d-i passwd/username string jenkins
 272 # Normal user's password, either in clear text
 273 #d-i passwd/user-password password insecure
 274 #d-i passwd/user-password-again password insecure
 275 # or encrypted using an MD5 hash.
 276 d-i passwd/user-password-crypted password $1$svkdd48V$/ovKt1dnK18UIZAA4xt6/1
 277 # Create the first user with the specified UID instead of the default.
 278 #d-i passwd/user-uid string 1010
 279 # The installer will warn about weak passwords. If you are sure you know
 280 # what you're doing and want to override it, uncomment this.
 281 d-i user-setup/allow-password-weak boolean true
 282
 283 # The user account will be added to some standard initial groups. To
 284 # override that, use this.
 285 #d-i passwd/user-default-groups string audio cdrom video
 286
 287 # Set to true if you want to encrypt the first user's home directory.
 288 d-i user-setup/encrypt-home boolean false
 289
 290 ### Apt setup
 291 # You can choose to install restricted and universe software, or to install
 292 # software from the backports repository.
 293 #d-i apt-setup/restricted boolean true
 294 #d-i apt-setup/universe boolean true
 295 #d-i apt-setup/backports boolean true
 296 # Uncomment this if you don't want to use a network mirror.
 297 #d-i apt-setup/use_mirror boolean false
 298 # Select which update services to use; define the mirrors to be used.
 299 # Values shown below are the normal defaults.
 300 #d-i apt-setup/services-select multiselect security
 301 #d-i apt-setup/security_host string security.ubuntu.com
 302 #d-i apt-setup/security_path string /ubuntu
 303
 304 # Additional repositories, local[0-9] available
 305 #d-i apt-setup/local0/repository string \
 306 #       http://local.server/ubuntu squeeze main
 307 #d-i apt-setup/local0/comment string local server
 308 # Enable deb-src lines
 309 #d-i apt-setup/local0/source boolean true
 310 # URL to the public key of the local repository; you must provide a key or
 311 # apt will complain about the unauthenticated repository and so the
 312 # sources.list line will be left commented out
 313 #d-i apt-setup/local0/key string http://local.server/key
 314
 315 # By default the installer requires that repositories be authenticated
 316 # using a known gpg key. This setting can be used to disable that
 317 # authentication. Warning: Insecure, not recommended.
 318 #d-i debian-installer/allow_unauthenticated boolean true
 319
 320 ### Package selection
 321 #tasksel tasksel/first multiselect ubuntu-desktop
 322 #tasksel tasksel/first multiselect lamp-server, print-server
 323 #tasksel tasksel/first multiselect kubuntu-desktop
 324 tasksel tasksel/first multiselect
 325
 326 # Individual additional packages to install
 327 d-i pkgsel/include string openssh-server
 328 # Whether to upgrade packages after debootstrap.
 329 # Allowed values: none, safe-upgrade, full-upgrade
 330 #d-i pkgsel/upgrade select none
 331
 332 # Language pack selection
 333 #d-i pkgsel/language-packs multiselect de, en, zh
 334
 335 # Policy for applying updates. May be "none" (no automatic updates),
 336 # "unattended-upgrades" (install security updates automatically), or
 337 # "landscape" (manage system with Landscape).
 338 d-i pkgsel/update-policy select none
 339
 340 # Some versions of the installer can report back on what software you have
 341 # installed, and what software you use. The default is not to report back,
 342 # but sending reports helps the project determine what software is most
 343 # popular and include it on CDs.
 344 #popularity-contest popularity-contest/participate boolean false
 345
 346 # By default, the system's locate database will be updated after the
 347 # installer has finished installing most packages. This may take a while, so
 348 # if you don't want it, you can set this to "false" to turn it off.
 349 #d-i pkgsel/updatedb boolean true
 350
 351 ### Boot loader installation
 352 # Grub is the default boot loader (for x86). If you want lilo installed
 353 # instead, uncomment this:
 354 #d-i grub-installer/skip boolean true
 355 # To also skip installing lilo, and install no bootloader, uncomment this
 356 # too:
 357 #d-i lilo-installer/skip boolean true
 358
 359 # With a few exceptions for unusual partitioning setups, GRUB 2 is now the
 360 # default. If you need GRUB Legacy for some particular reason, then
 361 # uncomment this:
 362 #d-i grub-installer/grub2_instead_of_grub_legacy boolean false
 363
 364 # This is fairly safe to set, it makes grub install automatically to the MBR
 365 # if no other operating system is detected on the machine.
 366 d-i grub-installer/only_debian boolean true
 367
 368 # This one makes grub-installer install to the MBR if it also finds some other
 369 # OS, which is less safe as it might not be able to boot that other OS.
 370 d-i grub-installer/with_other_os boolean true
 371
 372 # Alternatively, if you want to install to a location other than the mbr,
 373 # uncomment and edit these lines:
 374 #d-i grub-installer/only_debian boolean false
 375 #d-i grub-installer/with_other_os boolean false
 376 #d-i grub-installer/bootdev  string (hd0,0)
 377 # To install grub to multiple disks:
 378 #d-i grub-installer/bootdev  string (hd0,0) (hd1,0) (hd2,0)
 379
 380 # Optional password for grub, either in clear text
 381 #d-i grub-installer/password password r00tme
 382 #d-i grub-installer/password-again password r00tme
 383 # or encrypted using an MD5 hash, see grub-md5-crypt(8).
 384 #d-i grub-installer/password-crypted password [MD5 hash]
 385
 386 # Use the following option to add additional boot parameters for the
 387 # installed system (if supported by the bootloader installer).
 388 # Note: options passed to the installer will be added automatically.
 389 #d-i debian-installer/add-kernel-opts string nousb
 390
 391 ### Finishing up the installation
 392 # During installations from serial console, the regular virtual consoles
 393 # (VT1-VT6) are normally disabled in /etc/inittab. Uncomment the next
 394 # line to prevent this.
 395 #d-i finish-install/keep-consoles boolean true
 396
 397 # Avoid that last message about the install being complete.
 398 d-i finish-install/reboot_in_progress note
 399
 400 # This will prevent the installer from ejecting the CD during the reboot,
 401 # which is useful in some situations.
 402 #d-i cdrom-detect/eject boolean false
 403
 404 # This is how to make the installer shutdown when finished, but not
 405 # reboot into the installed system.
 406 #d-i debian-installer/exit/halt boolean true
 407 # This will power off the machine instead of just halting it.
 408 #d-i debian-installer/exit/poweroff boolean true
 409
 410 ### Preseeding other packages
 411 # Depending on what software you choose to install, or if things go wrong
 412 # during the installation process, it's possible that other questions may
 413 # be asked. You can preseed those too, of course. To get a list of every
 414 # possible question that could be asked during an install, do an
 415 # installation, and then run these commands:
 416 #   debconf-get-selections --installer > file
 417 #   debconf-get-selections >> file
 418
 419
 420 #### Advanced options
 421 ### Running custom commands during the installation
 422 # d-i preseeding is inherently not secure. Nothing in the installer checks
 423 # for attempts at buffer overflows or other exploits of the values of a
 424 # preconfiguration file like this one. Only use preconfiguration files from
 425 # trusted locations! To drive that home, and because it's generally useful,
 426 # here's a way to run any shell command you'd like inside the installer,
 427 # automatically.
 428
 429 # This first command is run as early as possible, just after
 430 # preseeding is read.
 431 #d-i preseed/early_command string anna-install some-udeb
 432 # This command is run immediately before the partitioner starts. It may be
 433 # useful to apply dynamic partitioner preseeding that depends on the state
 434 # of the disks (which may not be visible when preseed/early_command runs).
 435 #d-i partman/early_command \
 436 #       string debconf-set partman-auto/disk "$(list-devices disk | head -n1)"
 437 # This command is run just before the install finishes, but when there is
 438 # still a usable /target directory. You can chroot to /target and use it
 439 # directly, or use the apt-install and in-target commands to easily install
 440 # packages and run commands in the target system.
 441 #d-i preseed/late_command string apt-install zsh; in-target chsh -s /bin/zsh
 442 d-i preseed/late_command string \
 443 mkdir /target/root/.ssh; \
 444 chmod 700 /target/root/.ssh; \
 445 wget http://tftp.internal.efficios.com/authorized_keys -O /target/root/.ssh/authorized_keys; \
 446 mkdir /target/home/jenkins/.ssh; \
 447 chmod 700 /target/home/jenkins/.ssh; \
 448 echo "ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQDA3fwpioVLDoCQsQkYK5bOwPb8N0EXeYm2MleBQTfqxtKaqWWbmUtFXAiyclKHRspjcAiIKwwqLyhPopHBqJzmXnB0GsfGmxXJ6wSBgKJ4kdBVRM+nKlK0wCl1oQkFeV/Xl3jzt1Ey96XiNWlesfkvgcMCpsJzQ7/xRb9IcghskzlQbLOwDNir/156JgAYUYvOLqNCcE+xcgPxJGanfZDXTLkfBYxaeaB8isBPeEU6fhPvu/W055M1uB7E0qhcbFtuKCBu1Fg4jzsW4yDU8+ZB1b5mAXwEAuMbVGMrOf4rjtTpGpQd6XFsXpFT28NU1u5j2cUbtANJalkNDX/UY6XJ jenkins@ci-master-02" > /target/home/jenkins/.ssh/authorized_keys; \
 449 chown -R 1000:1000 /target/home/jenkins/.ssh;