<!DOCTYPE html PUBLIC "-//W3C//DTD HTML 4.01 Transitional//EN">
<html>
<head>
- <title>Linux Trace Toolkit Quickstart</title>
+ <title>Linux Trace Toolkit Next Generation User Documentation</title>
</head>
<body>
-<h1>Linux Trace Toolkit Quickstart</h1>
-
+<h1>Linux Trace Toolkit Next Generation User Documentation</h1>
Author : Mathieu Desnoyers, September 2005<br>
Last update : January 21st, 2009<br>
+(originally known as the LTTng QUICKSTART guide)
<h2>Table of Contents</h2>
<ul>
<li><a href="#intro" name="TOCintro">Introduction</a></li>
<li><a href="#section1" name="TOCsection1">Installing LTTng and LTTV from
sources</a></li>
+<ul>
+<li><a href="#prerequisites" name="TOCprerequisites">Prerequisistes</li>
+<li><a href="#getlttng" name="TOCgetlttng">Getting the LTTng packages</li>
+<li><a href="#getlttngsrc" name="TOCgetlttngsrc">Getting the LTTng kernel sources</li>
+<li><a href="#installlttng" name="TOCinstalllttng">Installing a LTTng kernel</li>
+<li><a href="#editconfig" name="TOCeditconfig">Editing the system wide
+configuration</a>
+<li><a href="#getlttctl" name="TOCgetlttctl">Getting and installing the
+ltt-control package</li>
+<li><a href="#userspacetracing" name="TOCuserspacetracing">Userspace Tracing</li>
+<li><a href="#getlttv" name="TOCgetlttv">Getting and installing the LTTV package</ul>
<li><a href="#section2" name="TOCsection2">Using LTTng and LTTV</a></li>
<li><a href="#section3" name="TOCsection3">Adding kernel and user-space
-tracepoints</a></li>
+instrumentation</a>
+<ul>
+<li><a href="#kerneltp" name="TOCkerneltp">Adding kernel instrumentation</a></li>
+<li><a href="#usertp" name="TOCusertp">Adding userspace instrumentation</a></li>
+</ul>
+
+<li><a href="#section4" name="TOCsection4">Creating Debian and RPM packages
+from LTTV</a>
</ul>
<h2><a href="#TOCintro" name="intro">Introduction</a></h2>
<p>
-This document is made of three parts : the first one explains how
+This document is made of four parts : the first one explains how
to install LTTng and LTTV from sources, the second one describes the steps
-to follow to trace a system and view it. The third and last part explains
+to follow to trace a system and view it. The third part explains
briefly how to add a new trace point to the kernel and to user space
-applications.
-
+applications. The fourth and last part explains how to create Debian or RPM
+packages from the LTTng and LTTV sources.
<p>
These operations are made for installing the LTTng 0.86 tracer on a linux 2.6.X
kernel. You will also find instructions for installation of LTTV 0.12.x : the
Linux Trace Toolkit Viewer.
-
-<p>
To see the list of compatibilities between LTTng, ltt-control, LTTV, please
refer to :
<a
href="http://ltt.polymtl.ca/svn/trunk/lttv/doc/developer/lttng-lttv-compatibility.html">LTTng+LTTV versions compatibility</a>
-
-<p>
The lttng patch is necessary to have the tracing hooks in the kernel.
<br>
<br>
-** Current development status **<br>
-<br>
-<br>
-LTTng :<br>
Supported architectures :
+br>
+LTTng :<br>
<li> x86 32/64 bits
<li> PowerPC 32 and 64 bits
<li> ARM (with limited timestamping precision, e.g. 1HZ. Need
<br>
<br>
LTTV :<br>
-supported architectures :<br>
<li> Intel 32/64 bits
<li> PowerPC 32 and 64 bits
<li> Possibly others. Takes care of endianness and type size difference between
<hr />
-***********************************************************
-** Section 1 * Installation from Debian or RPM packages **
-***********************************************************
-
-* Create custom LTTV Debian packages
-
-Use : dpkg-buildpackage -rfakeroot
-
-You should then have your LTTV .deb files created for your architecture.
-
-* Create custom LTTng packages
-
-For building LTTng Debian packages :
-
-Get the build tree with patches applies as explained in section 2.
-
-make menuconfig (or xconfig or config) (customize your configuration)
-make-kpkg kernel_image
-
-You will then see your freshly created .deb in /usr/src. Install it with
-dpkg -i /usr/src/(image-name).deb
-
-Then, follow the section "Editing the system wide configuration" in section 2.
-
-***********************************************************
-** Section 2 * Installation from sources **
-***********************************************************
-
-* Prerequisites
+<h2><a href="#TOCsection1" name="section1">Installation from sources</a></h2>
+<p>
+<h3><a href="#TOCprerequisites" name="prerequisites">Prerequisites</a></h3>
+<ul>
+<p>
Tools needed to follow the package download steps :
-o wget
-o bzip2
-o gzip
-o tar
+<li>wget
+<li>bzip2
+<li>gzip
+<li>tar
+<p>
You have to install the standard development libraries and programs necessary
to compile a kernel :
+<PRE>
(from Documentation/Changes in the Linux kernel tree)
-o Gnu C 2.95.3 # gcc --version
-o Gnu make 3.79.1 # make --version
-o binutils 2.12 # ld -v
-o util-linux 2.10o # fdformat --version
-o module-init-tools 0.9.10 # depmod -V
+Gnu C 2.95.3 # gcc --version
+Gnu make 3.79.1 # make --version
+binutils 2.12 # ld -v
+util-linux 2.10o # fdformat --version
+module-init-tools 0.9.10 # depmod -V
+</PRE>
+<p>
You might also want to have libncurses5 to have the text mode kernel
configuration menu, but there are alternatives.
+<p>
Prerequisites for LTTV 0.x.x installation are :
+<PRE>
gcc 3.2 or better
gtk 2.4 or better development libraries
(Debian : libgtk2.0, libgtk2.0-dev)
libc6 development librairies
(Debian : libc6, libc6-dev)
(Fedora : glibc, glibc)
+</PRE>
+</ul>
-* Reminder
-
-See the list of compatibilities between LTTng, ltt-control, LTTV and
-markers-userspace at :
-http://ltt.polymtl.ca > LTTng+LTTV versions compatibility
+<li>Reminder</li>
+<p>
+See the list of compatibilities between LTTng, ltt-control and LTTV at :
+<a
+href="http://ltt.polymtl.ca/svn/trunk/lttv/doc/developer/lttng-lttv-compatibility.html">LTTng+LTTV
+versions compatibility</a>.
-* Getting the LTTng packages
+<h3><a href="#TOCgetlttng" name="getlttng">Getting the LTTng packages</a></h3>
+<PRE>
su -
mkdir /usr/src/lttng
cd /usr/src/lttng
(see http://ltt.polymtl.ca/lttng for package listing)
wget http://ltt.polymtl.ca/lttng/patch-2.6.X-lttng-0.x.xx.tar.bz2
bzip2 -cd patch-2.6.X-lttng-0.x.xx.tar.bz2 | tar xvof -
+</PRE>
-* Getting LTTng kernel sources
+<h3><a href="#TOCgetlttngsrc" name="getlttngsrc">Getting LTTng kernel sources</a></h3>
+<PRE>
su -
cd /usr/src
wget http://kernel.org/pub/linux/kernel/v2.6/linux-2.6.X.tar.bz2
or use quilt
cd ..
mv linux-2.6.X linux-2.6.X-lttng-0.x.xx
+</PRE>
-* Installing a LTTng kernel
+<h3><a href="#TOCinstalllttng" name="installlttng">Installing a LTTng kernel</a></h3>
+<PRE>
su -
cd /usr/src/linux-2.6.X-lttng-0.x.xx
make menuconfig (or make xconfig or make config)
the kernel name followed by enter)
Select the Linux 2.6.X-lttng-0.x.xx kernel in your boot loader.
--
+</PRE>
+<h3><a href="#TOCeditconfig" name="editconfig">Editing the system wide
+configuration</a></h3>
-
-* Editing the system wide configuration
-
+<p>
You must activate debugfs and specify a mount point. This is typically done in
-fstab such that it happens at boot time.
-
-If you have never used DebugFS before, these operation would do this for you :
+fstab such that it happens at boot time. If you have never used DebugFS before,
+these operation would do this for you :
+<PRE>
mkdir /mnt/debugfs
cp /etc/fstab /etc/fstab.lttng.bkp
echo "debugfs /mnt/debugfs debugfs rw 0 0" >> /etc/fstab
+</PRE>
+<p>
then, rebooting or issuing the following command will activate debugfs :
-
+<PRE>
mount /mnt/debugfs
+</PRE>
+<p>
You need to load the LTT modules to be able to control tracing from user
space. This is done by issuing the following commands. Note however
these commands load all LTT modules. Depending on what options you chose to
compile statically, you may not need to issue all these commands.
+<PRE>
modprobe ltt-trace-control
modprobe ltt-marker-control
modprobe ltt-tracer
modprobe trap-trace
#if locking tracing is wanted, uncomment the following
#modprobe lockdep-trace
+</PRE>
+<p>
If you want to have complete information about the kernel state (including all
the process names), you need to load the ltt-statedump module. This is done by
issuing the command :
+<PRE>
modprobe ltt-statedump
-
+</PRE>
+<p>
You can automate at boot time loading the ltt-control module by :
+<PRE>
cp /etc/modules /etc/modules.bkp
echo ltt-trace-control >> /etc/modules
echo ltt-marker-control >> /etc/modules
echo trap-trace >> /etc/modules
#if locking tracing is wanted, uncomment the following
#echo lockdep-trace >> /etc/modules
+</PRE>
-* Getting and installing the ltt-control package (on the traced machine)
+<h3><a href="#TOCgetlttctl" name="getlttctl">Getting and installing the
+ltt-control package (on the traced machine)</a></h3>
+<p>
(note : the ltt-control package contains lttd and lttctl. Although it has the
same name as the ltt-control kernel module, they are *not* the same thing.)
+
+<PRE>
su -
cd /usr/src
wget http://ltt.polymtl.ca/lttng/ltt-control-0.x-xxxx2006.tar.gz
./configure
make
make install
+</PRE>
+<h3><a href="#TOCuserspacetracing" name="userspacetracing">Userspace tracing</a></h3>
-* Userspace tracing
-
+<PRE>
Make sure you selected the kernel menuconfig option :
<M> or <*> Support logging events from userspace
And that the ltt-userspace-event kernel module is loaded if selected as a
It will appear in the trace under event :
channel : userspace
event name : event
+</PRE>
+<h3><a href="#TOCgetlttv" name="getlttv">Getting and installing the LTTV package
+(on the visualisation machine, same
+or different from the visualisation machine)</a></h3>
-* Getting and installing the LTTV package (on the visualisation machine, same or
- different from the visualisation machine)
-
+<PRE>
su -
cd /usr/src
wget http://ltt.polymtl.ca/packages/lttv-0.x.xx-xxxx2008.tar.gz
./configure
make
make install
+</PRE>
+<hr />
-* Getting and installing the markers-userspace package for user space tracing
-(experimental)
-See http://ltt.polymtl.ca/packages/markers-userspace-0.5.tar.bz2 or more recent.
-
-
-
-***********************************************************
-** Section 3 * Using LTTng and LTTV **
-***********************************************************
-* IMPORTANT : Arm Linux Kernel Markers after each boot
+<h2><a href="#TOCsection2" name="section2">Using LTTng and LTTV</a></h2>
+<li>IMPORTANT : Arm Linux Kernel Markers after each boot</li>
+<PRE>
ltt-armall
+</PRE>
-* Use graphical LTTV to control tracing and analyse traces
-
+<li>Use graphical LTTV to control tracing and analyse traces</li>
+<PRE>
lttv-gui (or /usr/local/bin/lttv-gui)
- Spot the "Tracing Control" icon : click on it
(it's a traffic light icon)
- click "stop"
- Yes
* You should now see a trace
+</PRE>
-* Use text mode LTTng to control tracing
-
+<li>Use text mode LTTng to control tracing</li>
+<PRE>
The tracing can be controlled from a terminal by using the lttctl command (as
root).
lttctl -D trace1
see lttctl --help for details.
-
+</PRE>
+<p>
(note : to see if the buffers has been filled, look at the dmesg output after
lttctl -R or after stopping tracing from the GUI, it will show an event lost
count. If it is the case, try using larger buffers. See lttctl --help to learn
how. lttv now also shows event lost messages in the console when loading a trace
with missing events or lost subbuffers.)
-* Use text mode LTTV
-
+<li>Use text mode LTTV</li>
+<p>
Feel free to look in /usr/local/lib/lttv/plugins to see all the text and
graphical plugins available.
-
+<p>
For example, a simple trace dump in text format is available with :
-
+<PRE>
lttv -m textDump -t /tmp/trace
-
-see lttv -m textDump --help for detailed command line options of textDump.
-
+</PRE>
+<p>
+See lttv -m textDump --help for detailed command line options of textDump.
+<p>
It is, in the current state of the project, very useful to use "grep" on the
text output to filter by specific event fields. You can later copy the timestamp
of the events to the clipboard and paste them in the GUI by clicking on the
bottom right label "Current time". Support for this type of filtering should
be added to the filter module soon.
-* Hybrid mode
-
+<li>Hybrid mode</li>
+<p>
Starting from LTTng 0.5.105 and ltt-control 0.20, a new mode can be used :
hybrid. It can be especially useful when studying big workloads on a long period
of time.
-
+<p>
When using this mode, the most important, low rate control information will be
recorded during all the trace by lttd (i.e. process creation/exit). The high
rate information (i.e. interrupt/traps/syscall entry/exit) will be kept in a
flight recorder buffer (now named flight-channelname_X).
-
+<p>
The following lttctl commands take an hybrid trace :
-
+<p>
Create trace channel, start lttd on normal channels, start tracing:
+<PRE>
lttctl -C -w /tmp/trace2 -o channel.kernel.overwrite=1 trace2
-
+</PRE>
+<p>
Stop tracing, start lttd on flight recorder channels, destroy trace channels :
+<PRE>
lttctl -D -w /tmp/trace2 trace2
-
+</PRE>
+<p>
Each "overwrite" channel is flight recorder channel.
-* Flight recorder mode
-
+<li>Flight recorder mode</li>
+<p>
The flight recorder mode writes data into overwritten buffers for all channels,
including control channels, except for the facilities tracefiles. It consists of
setting all channels to "overwrite".
-
+<p>
The following lttctl commands take a flight recorder trace :
-
+<PRE>
lttctl -C -w /tmp/trace3 -o channel.all.overwrite=1 trace3
...
lttctl -D -w /tmp/trace3 trace3
+</PRE>
+
+<hr />
+
+<h2><a href="#TOCsection3" name="section3">Adding new instrumentations with the
+markers</a></h2>
+<p>
-**************************************************************
-** Section 4 * Adding new instrumentations with the markers **
-**************************************************************
+<h3><a href="#TOCkerneltp" name="kerneltp">Adding kernel
+instrumentation</a></h3>
-See Documentation/markers.txt and Documentation/tracepoints.txt in your kernel
+<p>
+See <a
+href="http://git.kernel.org/?p=linux/kernel/git/compudj/linux-2.6-lttng.git;a=blob;f=Documentation/markers.txt">Documentation/markers.txt</a>
+and <a
+href="http://git.kernel.org/?p=linux/kernel/git/compudj/linux-2.6-lttng.git;a=blob;f=Documentation/tracepoints.txt">Documentation/tracepoints.txt</a> in your kernel
tree.
+<p>
+Also see <a
+href="http://git.kernel.org/?p=linux/kernel/git/compudj/linux-2.6-lttng.git;a=tree;f=ltt/probes">ltt/probes/</a>
+for LTTng probe examples.
+
+<h3><a href="#TOCusertp" name="usertp">Adding userspace instrumentation</a></h3>
-* Add new events to userspace programs with userspace markers
-http://ltt.polymtl.ca/packages/
+<li>Add new events to userspace programs with
+<a href="http://ltt.polymtl.ca/packages/">userspace markers packages</a></li>
+<p>
Get the latest markers-userspace-*.tar.bz2 and see the Makefile and examples. It
allows inserting markers in executables and libraries, currently only on x86_32
and x86_64.
+See <a
+href="http://ltt.polymtl.ca/packages/markers-userspace-0.5.tar.bz2">markers-userspace-0.5.tar.bz2</a> or more recent.
+
+<p>
+Note that a new design document for a 3rd generation of tracepoint/marker-based
+userspace tracing is available at <a
+href="http://ltt.polymtl.ca/svn/trunk/lttv/doc/developer/ust.html">LTTng User-space Tracing
+Design"</a>. This new infrastructure is not yet implemented.
+
+<p>
+The easy quick-and-dirty way to perform userspace tracing is currently to write
+an string to /mnt/debugfs/ltt/write_event. See <a
+href="#userspacetracing">Userspace tracing</a> in the
+installation for sources section of this document.
+
+<hr />
+
+<h2><a href="#TOCsection4" name="section4">Creating Debian or RPM packages</a></h2>
+<p>
+
+<li>Create custom LTTV Debian packages</li>
+
+<PRE>
+Use : dpkg-buildpackage -rfakeroot
+</PRE>
+<p>
+You should then have your LTTV .deb files created for your architecture.
+
+<li>Create custom LTTng packages</li>
+<p>
+For building LTTng Debian packages :
+get the build tree with patches applies as explained in section 2.
+
+<PRE>
+make menuconfig (or xconfig or config) (customize your configuration)
+make-kpkg kernel_image
+</PRE>
+<p>
+You will then see your freshly created .deb in /usr/src. Install it with
+<PRE>
+dpkg -i /usr/src/(image-name).deb
+</PRE>
+<p>
+Then, follow the section "Editing the system wide configuration" in section 2.
+
+
</body>
</html>
projects / lttv.git / blobdiff