[lttng-modules.git] / probes / Makefile

#
# Makefile for the LTT probes.
# Only build from the package top-level directory. Never use with make directly.

ifneq ($(KERNELRELEASE),)
ifneq ($(CONFIG_TRACEPOINTS),)

KERNELDIR=${LTTNG_KERNELDIR}

include $(KBUILD_EXTMOD)/Makefile.ABI.workarounds

ccflags-y += -I$(PWD)/probes
obj-m += lttng-types.o

obj-m += lttng-probe-sched.o
obj-m += lttng-probe-irq.o
obj-m += lttng-probe-timer.o
obj-m += lttng-probe-kmem.o
obj-m += lttng-probe-module.o
obj-m += lttng-probe-power.o

obj-m += lttng-probe-statedump.o

ifneq ($(CONFIG_KVM),)
obj-m += lttng-probe-kvm.o
ifneq ($(CONFIG_X86),)
kvm_dep = $(srctree)/virt/kvm/iodev.h $(srctree)/include/kvm/iodev.h
ifneq ($(wildcard $(kvm_dep)),)
CFLAGS_lttng-probe-kvm-x86.o += -I$(srctree)/virt/kvm
CFLAGS_lttng-probe-kvm-x86-mmu.o += -I$(srctree)/virt/kvm
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
		echo "lttng-probe-kvm-x86.o" ; fi;)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
		echo "lttng-probe-kvm-x86-mmu.o" ; fi;)
else
$(warning File $(kvm_dep) not found. Probe "kvm" x86-specific is disabled. Use full kernel source tree to enable it.)
endif
endif
endif

obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 33 \) ] ; then \
		echo "lttng-probe-signal.o" ; fi;)

ifneq ($(CONFIG_BLOCK),)
ifneq ($(CONFIG_EVENT_TRACING),)	# need blk_cmd_buf_len
obj-m += lttng-probe-block.o
endif
endif

ifneq ($(CONFIG_NET),)
obj-m += lttng-probe-napi.o
obj-m += lttng-probe-skb.o
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 37 \) ] ; then \
		echo "lttng-probe-net.o" ; fi;)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
		echo "lttng-probe-sock.o" ; fi;)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
		echo "lttng-probe-udp.o" ; fi;)
endif

ifneq ($(CONFIG_SND_SOC),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
		echo "lttng-probe-asoc.o" ; fi;)
endif

ifneq ($(CONFIG_EXT3_FS),)
ext3_dep = $(srctree)/fs/ext3/*.h
ext3_dep_check = $(wildcard $(ext3_dep))
ext3 = $(shell \
	if [ $(VERSION) -ge 4 -o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
		if [ \( $(VERSION) -ge 4 -o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 4 \) \) -a \
			-z "$(ext3_dep_check)" ] ; then \
			echo "warn" ; \
			exit ; \
		fi; \
		echo "lttng-probe-ext3.o" ; \
	fi;)
ifeq ($(ext3),warn)
$(warning Files $(ext3_dep) not found. Probe "ext3" is disabled. Use full kernel source tree to enable it.)
ext3 =
endif
obj-m += $(ext3)
endif

ifneq ($(CONFIG_GPIOLIB),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 ] ; then \
		echo "lttng-probe-gpio.o" ; fi;)
endif

ifneq ($(CONFIG_JBD2),)
obj-m += lttng-probe-jbd2.o
endif

ifneq ($(CONFIG_JBD),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
		echo "lttng-probe-jbd.o" ; fi;)
endif

ifneq ($(CONFIG_REGULATOR),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
		echo "lttng-probe-regulator.o" ; fi;)
endif

ifneq ($(CONFIG_SCSI),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 35 \) ] ; then \
		echo "lttng-probe-scsi.o" ; fi;)
endif

vmscan = $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 36 \) ] ; then \
		echo "lttng-probe-vmscan.o" ; fi;)
ifneq ($(CONFIG_SWAP),)
	obj-m += $(vmscan)
else
ifneq ($(CONFIG_CGROUP_MEM_RES_CTLR),)
	obj-m += $(vmscan)
endif
endif

# lock probe does not work, so disabling it for now
#ifneq ($(CONFIG_LOCKDEP),)
#obj-m += lttng-probe-lock.o
#endif

ifneq ($(CONFIG_BTRFS_FS),)
btrfs_dep = $(srctree)/fs/btrfs/*.h
btrfs = $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 39 \) ] ; then \
		echo "lttng-probe-btrfs.o" ; fi;)
ifneq ($(btrfs),)
ifeq ($(wildcard $(btrfs_dep)),)
$(warning Files $(btrfs_dep) not found. Probe "btrfs" is disabled. Use full kernel source tree to enable it.)
btrfs =
endif
endif
obj-m += $(btrfs)
endif

obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
		echo "lttng-probe-compaction.o" ; fi;)

ifneq ($(CONFIG_EXT4_FS),)
ext4_dep = $(srctree)/fs/ext4/*.h
ext4 = lttng-probe-ext4.o
ifeq ($(wildcard $(ext4_dep)),)
$(warning Files $(ext4_dep) not found. Probe "ext4" is disabled. Use full kernel source tree to enable it.)
ext4 =
endif
obj-m += $(ext4)
endif

obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 4 \) ] ; then \
		echo "lttng-probe-printk.o" ; fi;)
ifneq ($(CONFIG_FRAME_WARN),0)
CFLAGS_lttng-probe-printk.o += -Wframe-larger-than=2200
endif

obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 6 \) \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -eq 5 -a $(SUBLEVEL) -ge 2 \) \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -eq 4 -a $(SUBLEVEL) -ge 9 \) \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -eq 0 -a $(SUBLEVEL) -ge 41 \) ] ; then \
		echo "lttng-probe-random.o" ; fi;)

obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 2 \) ] ; then \
		echo "lttng-probe-rcu.o" ; fi;)

ifneq ($(CONFIG_REGMAP),)
regmap_dep_4_1 = $(srctree)/drivers/base/regmap/trace.h
ifneq ($(wildcard $(regmap_dep_4_1)),)
obj-m += lttng-probe-regmap.o
else
$(warning File $(regmap_dep_4_1) not found. Probe "regmap" is disabled. Need Linux 4.1+ kernel source tree to enable it.)
endif
endif

ifneq ($(CONFIG_PM_RUNTIME),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 2 \) ] ; then \
		echo "lttng-probe-rpm.o" ; fi;)
endif

ifneq ($(CONFIG_SUNRPC),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 4 \) ] ; then \
		echo "lttng-probe-sunrpc.o" ; fi;)
endif

ifneq ($(CONFIG_VIDEO_V4L2),)
obj-m += $(shell \
	if [ $(VERSION) -ge 4 \
		-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 14 \) ] ; then \
		echo "lttng-probe-v4l2.o" ; fi;)
endif

obj-m += lttng-probe-workqueue.o

ifneq ($(CONFIG_KALLSYMS_ALL),)
obj-m +=  $(shell \
	if [ $(VERSION) -ge 3 \
		-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 36 \) ] ; then \
		echo "lttng-probe-writeback.o" ; fi;)
else
$(warning CONFIG_KALLSYMS_ALL is disabled, therefore probe "writeback" is disabled. Rebuild your kernel with this configuration option enabled in order to trace this subsystem.)
endif


ifneq ($(CONFIG_KPROBES),)
obj-m += lttng-kprobes.o
endif


ifneq ($(CONFIG_KRETPROBES),)
obj-m += lttng-kretprobes.o
endif

ifneq ($(CONFIG_DYNAMIC_FTRACE),)
obj-m += lttng-ftrace.o
endif

endif

else
	KERNELDIR ?= /lib/modules/$(shell uname -r)/build
	PWD := $(shell pwd)
	CFLAGS = $(EXTCFLAGS)

default:
	$(MAKE) -C $(KERNELDIR) M=$(PWD) modules

modules_install:
	$(MAKE) -C $(KERNELDIR) M=$(PWD) modules_install
	/sbin/depmod -a

clean:
	$(MAKE) -C $(KERNELDIR) M=$(PWD) clean

endif
Commit	Line	Data
	1	#
	2	# Makefile for the LTT probes.
	3	# Only build from the package top-level directory. Never use with make directly.
	4
	5	ifneq ($(KERNELRELEASE),)
	6	ifneq ($(CONFIG_TRACEPOINTS),)
	7
	8	KERNELDIR=${LTTNG_KERNELDIR}
	9
	10	include $(KBUILD_EXTMOD)/Makefile.ABI.workarounds
	11
	12	ccflags-y += -I$(PWD)/probes
	13	obj-m += lttng-types.o
	14
	15	obj-m += lttng-probe-sched.o
	16	obj-m += lttng-probe-irq.o
	17	obj-m += lttng-probe-timer.o
	18	obj-m += lttng-probe-kmem.o
	19	obj-m += lttng-probe-module.o
	20	obj-m += lttng-probe-power.o
	21
	22	obj-m += lttng-probe-statedump.o
	23
	24	ifneq ($(CONFIG_KVM),)
	25	obj-m += lttng-probe-kvm.o
	26	ifneq ($(CONFIG_X86),)
	27	kvm_dep = $(srctree)/virt/kvm/iodev.h $(srctree)/include/kvm/iodev.h
	28	ifneq ($(wildcard $(kvm_dep)),)
	29	CFLAGS_lttng-probe-kvm-x86.o += -I$(srctree)/virt/kvm
	30	CFLAGS_lttng-probe-kvm-x86-mmu.o += -I$(srctree)/virt/kvm
	31	obj-m += $(shell \
	32	if [ $(VERSION) -ge 3 \
	33	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
	34	echo "lttng-probe-kvm-x86.o" ; fi;)
	35	obj-m += $(shell \
	36	if [ $(VERSION) -ge 3 \
	37	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
	38	echo "lttng-probe-kvm-x86-mmu.o" ; fi;)
	39	else
	40	$(warning File $(kvm_dep) not found. Probe "kvm" x86-specific is disabled. Use full kernel source tree to enable it.)
	41	endif
	42	endif
	43	endif
	44
	45	obj-m += $(shell \
	46	if [ $(VERSION) -ge 3 \
	47	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 33 \) ] ; then \
	48	echo "lttng-probe-signal.o" ; fi;)
	49
	50	ifneq ($(CONFIG_BLOCK),)
	51	ifneq ($(CONFIG_EVENT_TRACING),) # need blk_cmd_buf_len
	52	obj-m += lttng-probe-block.o
	53	endif
	54	endif
	55
	56	ifneq ($(CONFIG_NET),)
	57	obj-m += lttng-probe-napi.o
	58	obj-m += lttng-probe-skb.o
	59	obj-m += $(shell \
	60	if [ $(VERSION) -ge 3 \
	61	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 37 \) ] ; then \
	62	echo "lttng-probe-net.o" ; fi;)
	63	obj-m += $(shell \
	64	if [ $(VERSION) -ge 4 \
	65	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
	66	echo "lttng-probe-sock.o" ; fi;)
	67	obj-m += $(shell \
	68	if [ $(VERSION) -ge 4 \
	69	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
	70	echo "lttng-probe-udp.o" ; fi;)
	71	endif
	72
	73	ifneq ($(CONFIG_SND_SOC),)
	74	obj-m += $(shell \
	75	if [ $(VERSION) -ge 3 \
	76	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
	77	echo "lttng-probe-asoc.o" ; fi;)
	78	endif
	79
	80	ifneq ($(CONFIG_EXT3_FS),)
	81	ext3_dep = $(srctree)/fs/ext3/*.h
	82	ext3_dep_check = $(wildcard $(ext3_dep))
	83	ext3 = $(shell \
	84	if [ $(VERSION) -ge 4 -o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
	85	if [ \( $(VERSION) -ge 4 -o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 4 \) \) -a \
	86	-z "$(ext3_dep_check)" ] ; then \
	87	echo "warn" ; \
	88	exit ; \
	89	fi; \
	90	echo "lttng-probe-ext3.o" ; \
	91	fi;)
	92	ifeq ($(ext3),warn)
	93	$(warning Files $(ext3_dep) not found. Probe "ext3" is disabled. Use full kernel source tree to enable it.)
	94	ext3 =
	95	endif
	96	obj-m += $(ext3)
	97	endif
	98
	99	ifneq ($(CONFIG_GPIOLIB),)
	100	obj-m += $(shell \
	101	if [ $(VERSION) -ge 3 ] ; then \
	102	echo "lttng-probe-gpio.o" ; fi;)
	103	endif
	104
	105	ifneq ($(CONFIG_JBD2),)
	106	obj-m += lttng-probe-jbd2.o
	107	endif
	108
	109	ifneq ($(CONFIG_JBD),)
	110	obj-m += $(shell \
	111	if [ $(VERSION) -ge 4 \
	112	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 1 \) ] ; then \
	113	echo "lttng-probe-jbd.o" ; fi;)
	114	endif
	115
	116	ifneq ($(CONFIG_REGULATOR),)
	117	obj-m += $(shell \
	118	if [ $(VERSION) -ge 3 \
	119	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
	120	echo "lttng-probe-regulator.o" ; fi;)
	121	endif
	122
	123	ifneq ($(CONFIG_SCSI),)
	124	obj-m += $(shell \
	125	if [ $(VERSION) -ge 3 \
	126	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 35 \) ] ; then \
	127	echo "lttng-probe-scsi.o" ; fi;)
	128	endif
	129
	130	vmscan = $(shell \
	131	if [ $(VERSION) -ge 3 \
	132	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 36 \) ] ; then \
	133	echo "lttng-probe-vmscan.o" ; fi;)
	134	ifneq ($(CONFIG_SWAP),)
	135	obj-m += $(vmscan)
	136	else
	137	ifneq ($(CONFIG_CGROUP_MEM_RES_CTLR),)
	138	obj-m += $(vmscan)
	139	endif
	140	endif
	141
	142	# lock probe does not work, so disabling it for now
	143	#ifneq ($(CONFIG_LOCKDEP),)
	144	#obj-m += lttng-probe-lock.o
	145	#endif
	146
	147	ifneq ($(CONFIG_BTRFS_FS),)
	148	btrfs_dep = $(srctree)/fs/btrfs/*.h
	149	btrfs = $(shell \
	150	if [ $(VERSION) -ge 3 \
	151	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 39 \) ] ; then \
	152	echo "lttng-probe-btrfs.o" ; fi;)
	153	ifneq ($(btrfs),)
	154	ifeq ($(wildcard $(btrfs_dep)),)
	155	$(warning Files $(btrfs_dep) not found. Probe "btrfs" is disabled. Use full kernel source tree to enable it.)
	156	btrfs =
	157	endif
	158	endif
	159	obj-m += $(btrfs)
	160	endif
	161
	162	obj-m += $(shell \
	163	if [ $(VERSION) -ge 3 \
	164	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 38 \) ] ; then \
	165	echo "lttng-probe-compaction.o" ; fi;)
	166
	167	ifneq ($(CONFIG_EXT4_FS),)
	168	ext4_dep = $(srctree)/fs/ext4/*.h
	169	ext4 = lttng-probe-ext4.o
	170	ifeq ($(wildcard $(ext4_dep)),)
	171	$(warning Files $(ext4_dep) not found. Probe "ext4" is disabled. Use full kernel source tree to enable it.)
	172	ext4 =
	173	endif
	174	obj-m += $(ext4)
	175	endif
	176
	177	obj-m += $(shell \
	178	if [ $(VERSION) -ge 4 \
	179	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 4 \) ] ; then \
	180	echo "lttng-probe-printk.o" ; fi;)
	181	ifneq ($(CONFIG_FRAME_WARN),0)
	182	CFLAGS_lttng-probe-printk.o += -Wframe-larger-than=2200
	183	endif
	184
	185	obj-m += $(shell \
	186	if [ $(VERSION) -ge 4 \
	187	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 6 \) \
	188	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -eq 5 -a $(SUBLEVEL) -ge 2 \) \
	189	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -eq 4 -a $(SUBLEVEL) -ge 9 \) \
	190	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -eq 0 -a $(SUBLEVEL) -ge 41 \) ] ; then \
	191	echo "lttng-probe-random.o" ; fi;)
	192
	193	obj-m += $(shell \
	194	if [ $(VERSION) -ge 4 \
	195	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 2 \) ] ; then \
	196	echo "lttng-probe-rcu.o" ; fi;)
	197
	198	ifneq ($(CONFIG_REGMAP),)
	199	regmap_dep_4_1 = $(srctree)/drivers/base/regmap/trace.h
	200	ifneq ($(wildcard $(regmap_dep_4_1)),)
	201	obj-m += lttng-probe-regmap.o
	202	else
	203	$(warning File $(regmap_dep_4_1) not found. Probe "regmap" is disabled. Need Linux 4.1+ kernel source tree to enable it.)
	204	endif
	205	endif
	206
	207	ifneq ($(CONFIG_PM_RUNTIME),)
	208	obj-m += $(shell \
	209	if [ $(VERSION) -ge 4 \
	210	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 2 \) ] ; then \
	211	echo "lttng-probe-rpm.o" ; fi;)
	212	endif
	213
	214	ifneq ($(CONFIG_SUNRPC),)
	215	obj-m += $(shell \
	216	if [ $(VERSION) -ge 4 \
	217	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 4 \) ] ; then \
	218	echo "lttng-probe-sunrpc.o" ; fi;)
	219	endif
	220
	221	ifneq ($(CONFIG_VIDEO_V4L2),)
	222	obj-m += $(shell \
	223	if [ $(VERSION) -ge 4 \
	224	-o \( $(VERSION) -eq 3 -a $(PATCHLEVEL) -ge 14 \) ] ; then \
	225	echo "lttng-probe-v4l2.o" ; fi;)
	226	endif
	227
	228	obj-m += lttng-probe-workqueue.o
	229
	230	ifneq ($(CONFIG_KALLSYMS_ALL),)
	231	obj-m += $(shell \
	232	if [ $(VERSION) -ge 3 \
	233	-o \( $(VERSION) -eq 2 -a $(PATCHLEVEL) -ge 6 -a $(SUBLEVEL) -ge 36 \) ] ; then \
	234	echo "lttng-probe-writeback.o" ; fi;)
	235	else
	236	$(warning CONFIG_KALLSYMS_ALL is disabled, therefore probe "writeback" is disabled. Rebuild your kernel with this configuration option enabled in order to trace this subsystem.)
	237	endif
	238
	239
	240	ifneq ($(CONFIG_KPROBES),)
	241	obj-m += lttng-kprobes.o
	242	endif
	243
	244
	245	ifneq ($(CONFIG_KRETPROBES),)
	246	obj-m += lttng-kretprobes.o
	247	endif
	248
	249	ifneq ($(CONFIG_DYNAMIC_FTRACE),)
	250	obj-m += lttng-ftrace.o
	251	endif
	252
	253	endif
	254
	255	else
	256	KERNELDIR ?= /lib/modules/$(shell uname -r)/build
	257	PWD := $(shell pwd)
	258	CFLAGS = $(EXTCFLAGS)
	259
	260	default:
	261	$(MAKE) -C $(KERNELDIR) M=$(PWD) modules
	262
	263	modules_install:
	264	$(MAKE) -C $(KERNELDIR) M=$(PWD) modules_install
	265	/sbin/depmod -a
	266
	267	clean:
	268	$(MAKE) -C $(KERNELDIR) M=$(PWD) clean
	269
	270	endif